Abstract:Experimental techniques such as the cone calorimeter, representing realistic fire conditions, and the thermogravimetric analyser (TGA) combined with evolved gas analysis (EGA) can be used to determine flammability and degradation properties of materials. The desire is to correlate the flammability properties measured in the cone calorimeter for samples of size 100mm×100mm with those measured or deduced from TGA combined with EGA for milligram samples. Such an achievement will allow the design of fire-safe materials by quickly assessing (a) the fire safety of materials in their earliest milligram formulation and (b) the dependence of their flammability properties on the molecular structure of the material. In the present study, a cone calorimeter and TGA investigation is conducted for commercial Nordic Spruce wood impregnated by mono-ammonium phosphate (fire retardant, FR) through a vacuum pressure method. Experiments in the cone calorimeter with increasing FR concentrations indicated that (a) the char yields increased, (b) the apparent ignition temperature increased, (c) time to piloted ignition increased, (d) the total amount of heat released was reduced, (e) the peak heat release rate was reduced and (f) the carbon monoxide and smoke yields increased especially before ignition occurred. By comparison, char yields also increased with FR content in the TGA degradation experiments in nitrogen. The increase in the char yield with FR content explains quantitatively the decrease in the heat release in the cone calorimeter. By contrast, the onset temperatures measured in TGA decreased, whereas the ignition temperature deduced in the cone calorimeter increased with FR content. This difference is attributed to reduced yield of levoglucosan (reported in recent literature using TGA/EGA) with increased char yield as well as to the presence of phosphorous containing moieties in the volatiles, which both can quench piloted ignition. Finally, the TGA measurements showed that the FR concentrations decreased for milligram samples at different distances from the surface of the wood used in the cone calorimeter measurements. The variation of FR retardant with depth needs to be considered when using TGA data to interpret cone calorimeter measurements and the fire performance of the FR wood in approval tests such as the single burning item (SBI).

Fire risk assessment of cypress wood coated with metal oxide and metal silicate flame retardant using cone calorimeter

Assessment of the fire risk rating for wood specimens coated with titanium dioxide/talc/water glass mixtures

Research on Fire Retardant Performance of Wood with the Compound of Potassium Carbonate and SiO2 Gels

The assessment of fire risk rating of wood specimens coated with metal oxides in different oxidation states in case of fire (I)

Fire Risk Rating Assessment for Wood Specimens Coated with Flame Retardant

Fire-retardant and Smoke-Suppressant Performance of an Intumescent Waterborne Amino-Resin Fire-Retardant Coating for Wood

Highly Flame-Retardant and Low Heat/Smoke-Release Wood Materials: Fabrication and Properties

Flame Protection Technologies for Wood: Developing and Testing for Fire of Timbers with a Flame-retardant Coating Based on the Epoxy-amine Composite Modified by Copper(II) Hexafluorosilicate

Facilely produced highly adhered, low thermal conductivity and non-combustible coatings for fire safety

Toxic Gas and Smoke Generation and Flammability of Flame-Retardant Plywood

Effect of Expandable Graphite Flakes on the Flame Resistance of Oak Wood

Environmental Friendly Intumescent Flame Retardant Gives Epoxy Resin Excellent Fire Resistance and Mechanical Properties

Flammability assessment of fire-retarded Nordic Spruce wood using thermogravimetric analyses and cone calorimetry

Flame retardancy of wood coated by ZnO nanorod arrays via a hydrothermal method

Flame Retardancy of Wood Treated by Tio2/Zno Coating

Study on Flame-retardation and Smoke-suppression Characteristics and Mechanism of NSCFR Flame Retardant or Wood

Preparation and Synergistic Effect of Chitosan/Sodium Phytate/MgO Nanoparticle Fire-Retardant Coatings on Wood Substrate through Layer-By-Layer Self-Assembly

Preparation and Application of a Urea–Formaldehyde-Blended Guanidinium Azole–Phytic Acid–Copper Flame-Retardant Resin Coating

Construction of a Phytic Acid–Silica System in Wood for Highly Efficient Flame Retardancy and Smoke Suppression

Investigation of calcite and huntite/hydromagnesite mineral in co-presence regarding flame retardant and mechanical properties of wood composites

Flame-retardant smoke-suppressing and antibacterial poplar wood enabled by a bio-based flame retardant containing transition metal