Abstract:Many systems are usually subjected to the combined effects of degradation and random shocks at the same time. Their failures are the competitive result of soft failure caused by degradation and hard failure caused by shocks. For operating machinery, wear failure is the main failure mechanism, and the machine is also subject to shock during the wear process. This paper proposes a new generalized surface wear model in combination with dependent competing failure processes; this proposed model is different from the other wear model with independent wear increments. As a typical mechanical structure, worm gears and worms are subjected to the combined effect of two failure mechanisms: soft failure caused by performance degradation, and hard failure caused by shocks. Meanwhile, it is necessary to consider the competitiveness and correlation of these two failure mechanisms. The interdependent competitive failure model is used to describe the failure of operating machinery. In this study, the extended Archard model is used to calculate the wear depth of the tooth surface, and the wear model is established through the wear threshold. The relationship between tooth surface wear depth and duty cycle, sliding speed, and contact stress is analyzed. An iterative algorithm is used to derive a nonlinear time-varying wear degradation model considering contact stress and sliding velocity. Comparing the calculation results with the Monte Carlo simulation method, the model has high accuracy and describes the mechanism of soft and hard failures, and the mutual dependence of the two failure mechanisms has an important effect on reliability. Numerical examples are presented to illustrate the developed reliability models, along with sensitivity analysis.

Lubrication reliability analysis of spur gear systems based on random dynamics

Simulation Analysis for Lubrication State of the Thrust Washer Within Straight Planetary Gear Set

Dynamics Analysis of Spur Gears Considering Random Surface Roughness with Improved Gear Body Stiffness

Stochastic Uncertain Lubrication in Gear Transmission Subjected to Tribodynamic Loading

Wear prediction considering dynamic load for spur gear in mixed elastohydrodynamic lubrication

Dynamic reliability analysis of gear transmission system based on sparse grid numerical integration and saddle‐point approximation method

Nonlinear Dynamics and Meshing State Transition Analysis of Spalling Defect Gears with Multi-Lubrication Conditions

Investigation on Coupling Effects Between Surface Wear and Dynamics in A Spur Gear System

Mesh stiffness and nonlinear dynamic response of a spur gear pair considering tribo-dynamic effect

Dynamic analysis of gear system with multiple lubrication states in torque–speed parameter space

Dynamics characteristics of wind turbine gear pairs considering lubrication and tooth surface roughness

Dynamics modeling and analysis of planetary gear mechanism under mixed elastohydrodynamic lubrication

Subsurface stress-field analysis of generating ground helical gear based on finite line-contact mixed elastohydrodynamic lubrication

Lubrication Performance of Helical Gear Pair Under Dynamic Load Based on Local Involute Profile

Dynamic Reliability Analysis of Gear Transmission System of Wind Turbine in Consideration of Randomness of Loadings and Parameters

Numerical Analysis of Transient Elastohydrodynamic Lubrication of Helical Gears

Development of a Statistical Reliability-Based Model for the Estimation and Optimization of a Spur Gear System

Reliability modeling for planetary gear transmission system considering dependent failure processes

Vibration stability and bifurcation analysis of spur gear systems based on time-varying backlash and random load

Reliability Analysis for the Dependent Competing Failure With Wear Model and its Application to the Turbine and Worm System

Dynamic analysis of uncertain spur gear systems