Abstract:Selective laser melting (SLM) is an important additive manufacturing process. It applies focused laser energy to quickly melt and solidify material powders, and a controlled layered operation can result in a free form build that is often out of reach for machining processes. As such, it has attracted much attention in recent years. However, metal components produced by this process often have inferior mechanical properties, as compared with the counterparts by the traditional manufacturing processes. To strengthen the metal components by SLM, adding reinforcement particles and applying post treatment are regarded as the two effective ways. Although adding reinforcement particles to create metal matrix composites has been studied by researchers in literature, much fewer has been done to use post treatment processes to further improve the properties and performance of the metal matrix composites from SLM. In this study, a nano-TiC reinforced Inconel 718 composite is prepared using SLM technique. The material has 0.5 wt.% nano-TiC addition. Solid solution treatments at three levels of temperature (940, 980, 1020 °C) are carried out to evaluate the effect of the heat treatment methods on the microstructure and resulted mechanical properties of the composite material. The results of samples with and without heat treatment are also compared. SEM observations are carried out to analyze the microstructure of the composite and understand the reinforcing mechanism. Tensile tests are conducted to evaluate the mechanical properties of the formed composites. It is discovered that compared with the pure Inconel 718 by SLM, the Inconel 718-TiC composite exhibits improved ultimate tensile strength. Microscopy observation of as-built samples indicates that the dendritic structures of Inconel 718 is remarkably refined by the TiC particles. Suspected laves phase particles are observed in as-built Inconel-TiC composite, and they partially transform to large amount of needle-like δ phase during the solid solution treatment.

Effect of HIP treatment on the microstructure and mechanical properties of a Ni-based superalloy fabricated by selective laser melted method

Effect of post-treatment on the microstructure and tensile properties of Ni–Co-based superalloy manufactured by selective laser melting

In-situ Study of Microstructure and Mechanical Properties of GH3536 Alloy Manufactured by Selective Laser Melting at 750 °C

Effects of hot isostatic pressing treatment on the microstructure and tensile properties of Ni-based superalloy CM247LC manufactured by selective laser melting

Effect of Post Processing Heat Treatment Routes on Microstructure and Mechanical Property Evolution of Haynes 282 Ni-Based Superalloy Fabricated with Selective Laser Melting (SLM)

Effect of hot isostatic pressing on the mechanical and corrosive properties of Ti–Ni alloy fabricated by selective laser melting

Effect of heat treatment on microstructure and mechanical properties of selective laser melted Inconel 718 alloy

Effects of HIP Process Parameters on Microstructure and Mechanical Properties of Ti-6Al-4V Fabricated by SLM

Combined Thermo-Mechanical Techniques for Post-processing of the SLM-Printed Ni-Cr-Fe Alloy Parts

Heat treatment for selective laser melting of Inconel 718 alloy with simultaneously enhanced tensile strength and fatigue properties

Microstructural evolution and mechanical properties of Alloy 718 fabricated by selective laser melting following different post-treatments

Investigation on the influence of heat treatment on Inconel 718 fabricated by selective laser melting: Microstructure and high temperature tensile property

High-temperature mechanical properties of nickel-based superalloys manufactured by additive manufacturing

Effect of heat treatment on the microstructure and mechanical properties of Inconel 718 processed by selective laser melting

Effect of Post Heat Treatment on the Microstructure and Tensile Properties of Nano TiC Particulate Reinforced Inconel 718 by Selective Laser Melting

Effect of Hot Isostatic Pressing and Solution Heat Treatment on the Microstructure and Mechanical Properties of Ti-6Al-4V Alloy Manufactured by Selective Laser Melting

Effect of heat treatments on the microstructure and mechanical properties of IN738LC prepared by electron beam powder bed fusion

Effects of Sandblasting and HIP on Very High Cycle Fatigue Performance of SLM-fabricated IN718 Superalloy

Effect of Preheating Temperature on Microstructural and Mechanical Properties of Inconel 718 Fabricated by Selective Laser Melting

Anisotropic Stress Rupture Properties-Microstructure Relationships in SLM Inconel 718 Alloy

Effect of Solid Solution Temperature on Material Properties and Microstructure of Inconel 718/TiC Composites by Selective Laser Melting