Abstract:Supercritical multi-thermal fluid is an emerging and efficient heat carrier for thermal recovery of heavy oil, but the generation of supercritical multi-thermal fluid and its feasibility in thermal recovery are rarely discussed. In this paper, generation and flooding experiments of supercritical multi-thermal fluid were carried out, respectively, for the generation and feasibility of supercritical multi-thermal fluid. During the experiment, the temperature and pressure in the reactor and sand-pack were monitored and recorded, the fluid generated by the reaction was analyzed by chromatography, and enthalpy of the reaction product and displacement efficiency were calculated, respectively. The experimental results showed that the change in temperature and pressure in the reactor could be roughly divided into three stages in the generation process of supercritical multi-thermal fluid. The higher the proportion of oil in the reactant, the higher the maximum temperature in the reactor. When the proportion of oil and water in the reactant was constant, the temperature rise in the reactor was basically the same under different initial temperature and pressure conditions. Compared with the initial temperature and pressure, the oil–water ratio of the reactants had a significant effect on the generated supercritical multi-thermal fluid. The higher the proportion of oil, the more gas that was generated in the supercritical multi-thermal fluid, and the lower the specific enthalpy of the thermal fluid. Under the same proportion of oil and water, the gas–water mass ratio of the supercritical multi-thermal fluid generated by the reaction of crude oil was lower, and the specific enthalpy was higher. Through this study, it was found that supercritical multi-thermal fluid with a low gas–water mass ratio had higher oil displacement efficiency, higher early oil recovery rate, a larger supercritical area formed in the oil layer, and later channeling. The results of this study show that the optimal gas–water mass ratio of supercritical multi-thermal fluid was about 1, under which the oil displacement efficiency and supercritical area in the oil layer reached the maximum. Correspondingly, the optimal proportion of oil in the reactant when generating supercritical multi-component thermal fluid was about 10%. In oilfield applications, because the gas–water ratio in supercritical multi-component thermal fluid has a significant impact on oil displacement efficiency, the optimization of supercritical multi-thermal fluid should not only consider the generation process but also consider the oil displacement effect of the thermal fluid. The findings of this study could improve our understanding of the characteristics of generating supercritical multi-thermal fluid and the feasibility of supercritical multi-thermal fluid generated under different conditions in the oil displacement process. This research is of great significance for field applications of supercritical multi-thermal fluid.

Study on the displacement characteristics of flue gas complex thermal fluid

Study on Flow Characteristics of Flue Gas and Steam Co-Injection for Heavy Oil Recovery

Study on the Variation of Crude Oil and Flue Gas Components in Flue-Gas-Assisted Steam Flooding

Application of Flue Gas Foam-Assisted Steam Flooding in Complex and Difficult-to-Produce Heavy Oil Reservoirs

Application of flue‐gas foam in thermal‐chemical flooding for medium‐depth heavy oil reservoirs

Experimental investigation of carbon dioxide flooding in heavy oil reservoirs for enhanced oil recovery

Investigation of flue gas water-alternating gas (flue gas–WAG) injection for enhanced oil recovery and multicomponent flue gas storage in the post-waterflooding reservoir

Experimental study of combination emission gas and hot water from power plant for enhanced heavy oil recovery

Miscibility of light oil and flue gas under thermal action

Laboratory Study on the Oil Displacement Process in Low-Permeability Cores with Different Injection Fluids

Experimental Study on Combination Hot Water-Co2-chemical Flooding with Effects on Oil Recovery and Heat Transfer

Mechanism investigation of steam flooding heavy oil by comprehensive molecular characterization

Insights into enhanced oil recovery by thermochemical fluid flooding for ultra-heavy reservoirs: An experimental study

Study on the mechanism of CO 2 composite system assisted steam stimulation of oil recovery efficiency in heavy oil reservoirs

Pore-scale Experimental Study on EOR Mechanisms of Combining Thermal and Chemical Flooding in Heavy Oil Reservoirs

Experimental study on thermochemical composite flooding mechanism of extra heavy oil reservoirs with erosion channels

Research on hot water chemical flooding technology in Bohai heavy oil field

The Three-Dimensional Heterogeneous Simulation Study of CO2 Flooding in Low-Permeability Reservoirs

A Study on Generation and Feasibility of Supercritical Multi-Thermal Fluid

Mechanistic investigation of CO2-Assisted steam "synergistic oil recovery" in heavy oil reservoirs

A Review of High‐Temperature Foam for Improving Steam Flooding Effect: Mechanism and Application of Foam