Abstract:The disposal of organic waste materials such as polymers is a serious problem to natural ecosystems as some of them can be non-biodegradable and potentially toxic. Thus, there is immense interest in developing processes that convert waste polystyrene into useable carbon. In this work, we developed a unique approach for obtaining graphitic carbon from waste polystyrene as a raw carbon source. The conversion process is catalyzed using the Ni-butanethiolate ink in ultralow quantities under an optimized temperature (800 °C) in the presence of 5% hydrogen in nitrogen. Interestingly, macroporous sugar cubes are used as a soft template to hold polystyrene and the catalyst together during decomposition, eliminating the need for a high-pressure source for retaining carbon for graphitization at high temperatures. An additional step of hydrogen annealing for pyrolyzed carbon nullifies the surface effects and improves the graphitization, reduces the point defects, and enhances the crystallinity of carbon and electrical conductivity specifically required for an electric double-layer capacitor (EDLC). The SPC8H-based graphitic carbon electrode exhibits perfect rectangular cyclic voltammetry characteristics with a symmetric triangular charge–discharge curve and a specific capacitance of ∼158 F/g at 1 A/g. The two-electrode EDLC device demonstrated excellent cyclic stability with a capacitance retention of ∼90% even after 10,000 cycles. This study reveals that the trashed polystyrene waste could be transformed into highly crystalline, graphitic carbon electrodes for energy storage devices. This indeed offers an alternative and sustainable approach with a low price to high-performance ratio that can probably manage the issue of white pollution at a commercial scale.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acsaelm.0c00542?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acsaelm.0c00542</a>.I–V characteristics of SPC8H and SPC8 carbon; CV measurements of SPC8H and SPC8 carbon in the voltage range of 1–1.6 V versus RHE at 5 mV/s; XRD pattern of the Ni catalyst obtained after thermolysis of Ni butanethiolate in 5% hydrogen; Raman spectra of SPC7, SPC8, SPC9, and SPC10; deconvoluted Raman spectrum of SPC7 and SPC8; TGA of sugar, polystyrene, the sugar–polymer composite with (SPC) and without the catalyst (SP), and the polymer catalyst in nitrogen at 10 °C/min; SSA and pore size of the SP8, SPC8, SPC8H, and SP8H samples; HRTEM image and the corresponding SAED pattern of SPC8 carbon; enlarged view of a Ni nanoparticle located in the sample and its corresponding ED pattern; comparative CV curves of the carbon material synthesized at different temperatures; CV measurements at 10 mV/s and the corresponding specific capacitance values for a varying amount of graphitic carbon per unit area of the electrode; CV curves of the SP8, SPC8, SP8H, and SPC8H carbon electrodes at different scan rates (10–100 mV/s); current density at 0.4 V versus RHE as a function of the square root of scan rate (υ)1/2 for SPC8H, SPC8, SP8H, and SP8; GCD curves of the SP8, SPC8, SP8H, and SPC8H carbon electrodes at different current densities (1–2 A/g); CV at different scan rates and GCD curves at different current densities of SPC8H-WP; specific capacitance at a variable current density of SPC8H-WP and SP8H-WP; cyclic capacitance retention at a current density of 1.5 A/g performed in a two-electrode device geometry; comparative CV curves at 10 mV/s for the pristine carbon cloth and graphitic carbon on carbon cloth (SPC8H-WP/CC) supercapacitor devices; GCD plots for SPC8H-WP/CC at low (1–8 A/g) and high (10–20 A/g) current densities; and literature survey of carbon-based EDLCs derived from waste polymers (<a class="ext-link" href="/doi/suppl/10.1021/acsaelm.0c00542/suppl_file/el0c00542_si_001.pdf">PDF</a>)This article has not yet been cited by other publications.

Ni Ink-Catalyzed Conversion of a Waste Polystyrene–Sugar Composite to Graphitic Carbon for Electric Double-Layer Supercapacitors

Pyrolysis of waste plastics-derived carbon nanomaterials on nickel foam for utilization as an efficient binder-free electrode: Effect of catalyst loading on capacitive performance

Sustainable synthesis of hierarchical nitrogen-doped porous carbons from polyolefin waste for high-performance supercapacitors

Up-Scalable Conversion of White-Waste Polystyrene Foams to Sulfur, Phosphorus-Codoped Porous Carbon for High-Performance Lithium–Sulfur Batteries

Laser‐Induced Formation of Fine Porous Graphitic Carbon for Eco‐Friendly Supercapacitors

Development of high-performance supercapacitor electrode derived from sugar industry spent wash waste

Polyethylene Waste Carbons with a Mesoporous Network Towards Highly Efficient Supercapacitors

A sustainable printed circuit board derived hierarchically porous carbon/polyaniline composites for supercapacitors

High-yield and nitrogen self-doped hierarchical porous carbon from polyurethane foam for high-performance supercapacitors

Boosting the Initial Coulombic Efficiency of Sustainable Hard Carbon Derived from Polyethylene Terephthalate with Cyclopentyl Methyl Ether As a Co-Solvent for Wide-Temperature Sodium-Ion Batteries

Cost-effective synthesis of nitrogen self-doped activated carbon with 3D porous honeycomb structure for enhanced supercapacitor electrode performance

High-performance, flexible, all-solid-state, asymmetric supercapacitors from recycled resin-based activated carbon, MnO 2 , and waste nonwoven materials

High-Performance Supercapacitor Electrodes from Fully Biomass-Based Polybenzoxazine Aerogels with Porous Carbon Structure

From Upcycled Waste Polyethylene Plastic to Graphene/mesoporous Carbon for High-Voltage Supercapacitors.

Polylactic acid-based plastic activated NiAl2O4 nanoparticles as highly active positive electrode materials for energy storage supercapacitor

An Eco-friendly polycaprolactone/graphite composite as a robust freestanding electrode platform for supercapacitive energy storage

Sustainable utilization of waste biomass ( Benincasa hispida ): Synthesis of N, O-doped foamy porous carbon with high capacitive properties by one-step oxidation-activation

Converting Biomass Waste into Microporous Carbon with Simultaneously High Surface Area and Carbon Purity As Advanced Electrochemical Energy Storage Materials

Novel bio-waste of Cinnamomum Verum leaves-derived carbon coin cylinder-like as sustainable electrode material for symmetrical supercapacitor

Sustainable Synthesis of N/S-Doped Porous Carbon from Waste-Biomass as Electroactive Material for Energy Harvesting

Facile synthesis of molybdenum disulfide adorned heteroatom-doped porous carbon for energy storage applications