Random terpolymer based on thiophene-thiazolothiazole unit enabling efficient non-fullerene organic solar cells

Jingnan Wu,Guangwei Li,Jin Fang,Xia Guo,Lei Zhu,Bing Guo,Yulong Wang,Guangye Zhang,Lingeswaran Arunagiri,Feng Liu,He Yan,Maojie Zhang,Yongfang Li

DOI: https://doi.org/10.1038/s41467-020-18378-9

IF: 16.6

2020-09-14

Nature Communications

Abstract:Abstract Developing a high-performance donor polymer is critical for achieving efficient non-fullerene organic solar cells (OSCs). Currently, most high-efficiency OSCs are based on a donor polymer named PM6, unfortunately, whose performance is highly sensitive to its molecular weight and thus has significant batch-to-batch variations. Here we report a donor polymer (named PM1) based on a random ternary polymerization strategy that enables highly efficient non-fullerene OSCs with efficiencies reaching 17.6%. Importantly, the PM1 polymer exhibits excellent batch-to-batch reproducibility. By including 20% of a weak electron-withdrawing thiophene-thiazolothiazole (TTz) into the PM6 polymer backbone, the resulting polymer (PM1) can maintain the positive effects (such as downshifted energy level and reduced miscibility) while minimize the negative ones (including reduced temperature-dependent aggregation property). With higher performance and greater synthesis reproducibility, the PM1 polymer has the promise to become the work-horse material for the non-fullerene OSC community.

multidisciplinary sciences

What problem does this paper attempt to address?

The problem that this paper attempts to solve is to develop a high - performance donor polymer to achieve highly efficient non - fullerene organic solar cells (OSCs). Currently, most high - efficiency OSCs are based on a donor polymer named PM6, but its performance is highly sensitive to molecular weight, resulting in significant differences between batches. Therefore, the development of donor polymers with high efficiency and better synthetic reproducibility is crucial for the practical application of OSCs. The paper reports a donor polymer (named PM1) based on a random terpolymerization strategy. This polymer can achieve highly efficient non - fullerene OSCs with an efficiency of up to 17.6% and exhibits excellent batch - to - batch reproducibility. By adding 20% of the weakly electron - attracting unit thieno - thiazolothiazole (TTz) to the PM6 polymer backbone, the resulting polymer (PM1) can minimize negative effects (such as reducing temperature - dependent aggregation characteristics) while maintaining positive effects (such as energy level down - shifting and reduced miscibility). This makes the PM1 polymer not only have higher performance but also better synthetic reproducibility, and it is expected to become a main material in the field of non - fullerene OSCs.

Random terpolymer based on thiophene-thiazolothiazole unit enabling efficient non-fullerene organic solar cells

Random Polymerization Strategy Leads to a Family of Donor Polymers Enabling Well‐Controlled Morphology and Multiple Cases of High‐Performance Organic Solar Cells

Random Terpolymer Enabling High‐Efficiency Organic Solar Cells Processed by Nonhalogenated Solvent with a Low Nonradiative Energy Loss

Terpolymerization and Regioisomerization Strategy to Construct Efficient Terpolymer Donors Enabling High‐Performance Organic Solar Cells

Two Compatible Polymer Donors Enabling Ternary Organic Solar Cells with a Small Nonradiative Energy Loss and Broad Composition Tolerance

Random Copolymerization Strategy for Host Polymer Donor PM6 Enables Improved Efficiency Both in Binary and Ternary Organic Solar Cells

Terpolymer Containing a meta-Octyloxy-phenyl-Modified Dithieno[3,2- f:2',3'- h]quinoxaline Unit Enabling Efficient Organic Solar Cells

A Random Terpolymer Donor with Similar Monomers Enables 18.28% Efficiency Binary Organic Solar Cells with Well Polymer Batch Reproducibility

A Donor Polymer Based on a Difluorinated Pentathiophene Unit Enabling Enhanced Performance for Nonfullerene Organic Solar Cells

High-Efficiency Ternary Organic Solar Cells with a Good Figure-of-Merit Enabled by Two Low-Cost Donor Polymers

Achieving Efficient and Stabilized Organic Solar Cells by Precisely Controlling the Proportion of Copolymerized Units in Electron-Rich Polymers.

Random Terpolymer Based on Simple Siloxane-functionalized Thiophene Unit Enabling High-performance Non-fullerene Organic Solar Cells

Toward High Efficiency Polymer Solar Cells: Rearranging the Backbone Units into a Readily Accessible Random Tetrapolymer

Terpolymers Containing Difluorobenzoxadiazole Enable Suppressed Energy Losses and Optimal Batch‐to‐Batch Reproducibility for High‐Efficiency Organics Solar Cells

Wide Bandgap Polymer Donors Based on Succinimide‐Substituted Thiophene for Non‐Fullerene Organic Solar Cells

Introducing Low‐Cost Pyrazine Unit into Terpolymer Enables High‐Performance Polymer Solar Cells with Efficiency of 18.23%

Wide Bandgap Polymer Donors Based on Succinimide-Substituted Thiophene for Nonfullerene Organic Solar Cells

The Renaissance of Oligothiophene‐Based Donor–Acceptor Polymers in Organic Solar Cells

Alkoxythiophene Directed Fibrillization of Polymer Donor for Efficient Organic Solar Cells

Designing a Highly Crystalline Polymer Donor with Alkylsilyl and Fluorine Substitution to Achieve Efficient Ternary Organic Solar Cells

Terpolymer Donor with Inside Alkyl Substituents on Thiophene π‐Bridges toward Thiazolothiazole A2‐Unit Enables 18.21% Efficiency of Polymer Solar Cells