Abstract:This study investigates the behavior of simple and continuous span steel box girder bridges after various damage scenarios, including bracing failure and girder fracture, and develops a non-contact bridge health monitoring technique based on the bridge dynamic responses. A series of field tests were conducted to study the feasibility of using non-contact sensors to capture the bridge dynamic responses. Moreover, detailed finite element models of the bridges were developed and validated using the field test and available experimental test results and were used to investigate the bridge failure mechanisms, maximum load-carrying capacity, alternative load paths, and dynamic responses. The bridge dynamic analysis after damage showed that bridge frequencies are sufficiently sensitive for identifying partial or full-depth girder fracture in the simple span bridges. However, these significant damages may cause very small changes in the natural frequencies of continuous span bridges. The results show a significant change in the mode shapes after damage in both simple and continuous span bridges. The mode shapes are sensitive enough to detect damage at the inflicted locations, in most cases with better resolution when compared to the frequency changes. The comparison of the intact and damaged bridge mode shapes indicates that damage at different locations along the bridge has different amplitude changes in the mode shape that could be used to localize the damage. Moreover, the analyses show that either the individual modal sensitivities or combined sensitivities are indicative for most locations throughout the span. The results also indicate a clear pattern of changes in the frequency and mode shape for each damage scenario that can be used to detect the damage type, severity, and location along the bridge.

Structural health monitoring on a steel-concrete composite continuous bridge during construction and vehicle load tests

Monitoring and Numerical Analysis for Construction Phase of a Steel-concrete Composite Continuous Box Girder Bridge

Strain-Based Structural Condition Assessment of an Instrumented Arch Bridge Using Fbg Monitoring Data

Structural Health Monitoring System for a Complicated Long-Span Continuous Girder Bridge: Implementation and Demonstration

Health monitoring system of steel-tube arch bridge : design and implementation of a teaching demonstration platform

Structural Performance and On-Site Monitoring of Steel-Concrete Composite Bridge with Link Slab

Structural Health Monitoring of Long-Span Continuous Girder Bridge: System Implementation and Data Analysis

Structural Health Monitoring Design and Performance Evaluation of a Middle-Span Bridge

Continuous Box-Girder Bridge Condition Assessment Based on Structural Health Monitoring System: A Case Study

Innovative Design of a Health Monitoring System and Its Implementation in a Complicated Long-Span Arch Bridge

Modeling and Testing of a Composite Steel-Concrete Joint for Hybrid Girder Bridges

Long Term Health Monitoring of Post-Tensioning Box Girder Bridges

Health Monitoring of A Continuous Rigid Frame Bridge Based on Pzt Impedance and Strain Measurements

Numerical Study on the Mechanical Performance of a Flexible Arch Composite Bridge with Steel Truss Beams over Its Entire Lifespan

Design of Health Monitoring System for Rigid-Frame and Continuous-Beam Composite Bridge

Monitoring and Structural Analysis of a Rehabilitated Box Girder Bridge Based on Long-Gauge Strain Sensors

Health monitoring of steel box girder bridges using non-contact sensors

Key Construction Monitoring Technology for Long-Span Continuous Girder Bridge

Monitoring Technology for Prestressed Concrete Continuous Box Girder Bridges

Research Of Full-Life Monitoring For Long Span-Bridge