Abstract:The ejector refrigeration cycle (ERC) is often used as the sub-cycle of power and cooling cogeneration systems due to its advantages of simple structure design, few moving parts, less system investment, good stability and reliable operation. Considering the potential of organic Rankine cycle (ORC) in the utilization of low-grade heat, and the advantages of simple structure and many choices for working fluid, a novel power and cooling cogeneration system was designed, based on dual-pressure evaporation ORC (DORC) and ERC. In this system, a common condenser was used by DORC and ERC, and a part of working fluid separated from low-pressure steam generator outlet in DORC was used as the primary flow of ejector to drive ERC. A mathematical model for calculating the thermodynamic and thermoeconomic performances of the system was established. Sensitivity analysis was performed to determine the key parameters of the system, the results showed that the low-pressure evaporation temperature (TLPSG,out), high-pressure evaporation temperature (THP,E), vapor fraction of the low-pressure steam generator outlet (xLPSG,out) and working fluid mass flow ratio of high-pressure stage to low-pressure stage (k) were the four key parameters of the system. Parametric analysis showed that higher TLPSG,out and lower xLPSG,out were beneficial to increase the cooling output and thermal efficiency, while higher THP,E and larger k were helpful to increase the net power output and exergy efficiency. The net power output and exergy efficiency can be optimized by TLPSG,out and xLPSG,out. Using genetic algorithm (GA), multi-objective function optimization was carried out with THP,E, TLPSG,out, xLPSG,out and k as the decision variables. Moreover, the system's adaptability for working fluids R245fa, R236ea, R600, R600a, R601 and R601a was investigated. According to the optimization results, R236ea was the most suitable working fluid. When THP,E was 402.43K, TLPSG,out was 392.42K, xLPSG,out was 0.357 and k was 0.321, the calculated net power output , cooling output, thermal efficiency, exergy efficiency and total cost of unit exergy product (SUCP) were 273.00kW, 121.80kW, 14.52%, 44.03% and 42.62$/MWh, respectively. Exergy analysis was conducted using R236ea as working fluid. The results showed that the two steam generators and condenser were the main components responsible for most of the exergy destruction of the system in both basic case and optimized case. Compared to the basic case, the exergy destruction of the steam generators decreased by about 32.3%, and the total exergy destruction of the system decreased by about 5.0% in optimized case.

Exergy-Based Ecological Optimization of an Irreversible Quantum Carnot Heat Pump with Spin-1/2 Systems

Energy, Exergy, Economic Performance Investigation and Multi-Objective Optimization of Reversible Heat Pump-Organic Rankine Cycle Integrating with Thermal Energy Storage

Performance Optimization of an Irreversible Carnot Refrigerator with Finite Mass Flow Rate

Optimization of energy production in two-qubit heat engines using the ecological function

Efficiency at maximum power of a quantum Carnot engine with temperature tunable baths

Optimisation Of An Irreversible Carnot Refrigerator Working Between Two Heat Reservoirs

Exergy Efficiency Design For Multi-Stream Plate-Fin Heat Exchangers Based On Entropy Generation Assessment

Three-level laser heat engine at optimal performance with ecological function

Ecological Function Analysis and Optimization of a Recompression S-CO2 Cycle for Gas Turbine Waste Heat Recovery

Entransy based heat exchange irreversibility analysis for a hybrid absorption-compression heat pump cycle

Optimization performance of quantum endoreversible Otto machines with dual-squeezed reservoirs

Thermodynamic and thermoeconomic performance analyses and optimization of a novel power and cooling cogeneration system fueled by low-grade waste heat

Exergy Analysis and Advanced Exergy Analysis of a Novel Power/Refrigeration Cascade System for Recovering Low-Grade Waste Heat at 90–150 °C

Internal dissipation and heat leaks in quantum thermodynamic cycles

Testing a Quantum Heat Pump with a Two-Level Spin

Exergy analysis for quasi two-stage compression heat pump system coupled with ejector

Efficient ecological function analysis and multi-objective optimizations for an endoreversible simple air refrigerator cycle

Energetic optimization considering a generalization of the ecological criterion in traditional simple-cycle and combined cycle power plants

Optimization analysis of an endoreversible quantum heat engine with efficient power function

THERMODYNAMIC OPTIMIZATION OF COUPLED HEAT WORK CONVERSION AND HEAT TRANSFER ENERGY SYSTEMS BY APPLYING INVERSE PROBLEM AND VARIATION METHOD

Exergy analysis and exergetic costs allocation in a novel CCHP system based on organic Rankine and simultaneous heating and cooling heat pump cycles