Abstract:Due to the weak rigidity of flexible thin-walled part and tool, deformation inevitably occurs under the action of a cutting force in the flank milling of thin-walled parts, resulting in reductions of the machining accuracy and efficiency. To solve the above problem, a force-induced deformation prediction model based on the static substructure method and a flexible error compensation strategy for the deformation of the thin-walled part and tool in flank milling are proposed. The tool is considered to be a cantilevered beam to calculate its deformation. The thin-walled part is divided into two substructures, namely, the substructure with the material to be cut (STBC) and the unmachined substructure, which remains unchanged. Deformation models of the two substructures are constructed based on the element stiffness matrix of the thin-walled part. The time-varying stiffness and the removed material from the thin-walled part are only updated in the deformation model of the STBC. The deformation model of the entire thin-walled part is constructed by coupling the deformation models of the two substructures. In this way, the degrees of freedom of the deformation model of the entire thin-walled part are significantly reduced. To reduce the deformation error, a flexible error compensation strategy is proposed. The tool location at the initial feed position is directly compensated by the mirror principle. For the other tool locations, the tool location at the next feed position is adjusted with the compensated tool location at the previous feed position as the initial iteration value. This flexible error compensation strategy is based on the continuity of the compensated toolpath, which is close to the actual cutting process and adjusts the tool locations with high convergence. Finally, the proposed methods are proven via flank milling experiments. The deformation prediction results agree with the experimental results, and the deformation errors are reduced greatly after error compensation by using the proposed strategy.

A collaborative optimization method of machining sequence for deformation control of double-sided structural parts

Kinematic Chain Optimization Design Based on Deformation Sensitivity Analysis of a Five-Axis Machine Tool

Build Orientation Optimization for Extrusion-Based Additive Manufacturing Coupling with Adaptive Slicing

Deformation Prediction and Compensation of a Dual-Machine Riveting System for Aircraft Assembly

Hybrid Position/Force Control for Dual-Machine Drilling and Riveting System

A stiffness matching-based deformation errors control strategy for dual-robot collaborative machining of thin-walled parts

Machining deformation of single-sided component based on finishing allowance optimization

A Deformation Control Method in Thin-Walled Parts Machining Based on Force and Stiffness Matching Via Cutter Orientation Optimization

Adaptive Optimization Method for Prediction and Compensation of Thin-Walled Parts Machining Deformation Based on On-Machine Measurement

Dual-sided co-machining scheme optimization for thin-wall components with complex geometry

An Effective Optimization Algorithm for Multipass Turning of Flexible Workpieces

Optimizing Cutting Sequences and Paths for Common-Edge Nested Parts

Dynamic Optimization of Multipass Turning of a Flexible Workpiece Considering the Effect of Cutting Sequence

Optimal Deformation Error Compensation Process in Flank Milling of Thin-Walled Workpieces

An Efficient Prediction Method for the Dynamic Deformation of Thin-Walled Parts in Flank Milling

A digital twin defined autonomous milling process towards the online optimal control of milling deformation for thin-walled parts

Force-induced deformation prediction and flexible error compensation strategy in flank milling of thin-walled parts

An accelerated convergence approach for real-time deformation compensation in large thin-walled parts machining

Tool orientation and redundancy integrated planning method constrained by stiffness for robotic machining of freeform surfaces

Single neuron PID based method for deformation suppression during CNC machining of parts