Abstract:Three installation-level lithium-ion battery (LIB) energy storage system (ESS) tests were conducted to the specifications of the UL 9540A standard test method [1]. Each test included a mocked-up initiating ESS unit rack and two target ESS unit racks installed within a standard size 6.06 m (20 ft) International Organization for Standardization (ISO) container. All tests were conducted with an identical LIB configuration. The initiating unit rack included nine modules (2,430 individual 18650 form factor cells) with a total capacity of 28.9 kWh. The target unit racks were loaded to one-third capacity of the initiating unit with nine partial modules and a total capacity of 9.6 kWh. All cells in the container were charged to 100% state-of-charge and none were electrically connected. Within the initiating mock-up unit, a flexible film heater was wrapped around an individual 18650 form factor cell. This instrumented 18650 cell was heated at a rate of 6°C/min to initiate thermal runaway. Test 1 was a baseline performance test and did not utilize any active fire suppression systems. Test 2 included a Novec 1230 system designed for an 8.3 vol% concentration discharged upon activation of two smoke detectors installed inside the container. Test 3 incorporated a dry pipe water suppression system to provide a uniform 20.8 mm/min (0.5 gpm/ft 2 ) spray density delivered at the top of the ESS unit enclosures. Thermocouples were used to measure the cell temperatures in the initiating unit rack and module surface temperatures for the initiating unit and target unit racks. Thermocouples were located throughout the ISO container to measure gas temperatures and wall temperatures. Schmidt-Boelter heat flux gauges were installed to measure incident heat flux to each of the target unit racks as well as the walls adjacent to the initiating rack. Smoke detectors and smoke obscuration meters were used to identify the presence of smoke and characterize opacity of the smoke in the container. Various laboratory- and industrial-grade sensors were used to characterize the gas composition throughout container.

Fire Hazard of Lithium-ion Battery Energy Storage Systems: 1. Module to Rack-scale Fire Tests

Fire Hazard Assessment of Lithium Ion Battery Energy Storage Systems

Investigation into the Lithium-Ion Battery Fire Resistance Testing Procedure for Commercial Use

Study of the Fire Behavior of High-Energy Lithium-Ion Batteries with Full-Scale Burning Test

Understanding and managing hazards of lithium‐ion battery systems

Assessment on fire risk of lithium-ion battery packs with different sizes and states of charge by cone calorimeter

Experimental Study on Thermal Runaway and Fire Behaviors of Large Format Lithium Iron Phosphate Battery

Full-scale walk-in containerized lithium-ion battery energy storage system fire test data

Experimental Investigation of Thermal Runaway Behavior and Hazards of a 1440 Ah LiFePO4 Battery Pack

Fire behavior of lithium-ion battery with different states of charge induced by high incident heat fluxes

Experimental Study on the Thermal Runaway and Fire Behavior of LiNi0.8Co0.1Mn0.1O2 Battery in Open and Confined Spaces

Experimental Investigation of Thermal Runaway Behavior and Hazards of a 1440 Ah LiFePO<sub>4</sub> Battery Pack

Multidimensional Fire Propagation of Lithium-Ion Phosphate Batteries for Energy Storage

Understanding the Influence of the Confined Cabinet on Thermal Runaway of Large Format Batteries with Different Chemistries: A Comparison and Safety Assessment Study

Advances in Safety of Lithium-Ion Batteries for Energy Storage: Hazard Characteristics and Active Suppression Techniques

Review—Meta-Review of Fire Safety of Lithium-Ion Batteries: Industry Challenges and Research Contributions

A review of fire mitigation methods for li‐ion battery energy storage system

Fire Protection Design of a Lithium-Ion Battery Warehouse Based on Numerical Simulation Results

Lithium ion battery energy storage systems (BESS) hazards

Strategies for Intelligent Detection and Fire Suppression of Lithium-Ion Batteries

A review of lithium-ion battery safety concerns: The issues, strategies, and testing standards