Cladophora algae cellulose and starch based bio-composite as an alternative for environmentally friendly packaging material

S. Steven,Ilham Octiano,Y. Mardiyati

DOI: https://doi.org/10.1063/5.0015845

2020-01-01

Abstract:Packaging plastic is the largest contributor to plastic pollution in the environment. Nowadays, the development of environmentally friendly packaging materials is a necessity. Cellulose is a naturally occurred polymer that has potential as raw material to manufacture environmentally friendly packaging. Cellulose is the most abundant natural polymer in the world which also renewable. Cellulose has excellent tensile strength, good water resistance and is biodegradable. One of the problems on the utilization of cellulose as environmentally friendly packaging that it is brittle and difficult to process. Starch is another natural polymer which also considered as suitable material to manufacture environmentally packaging material. Starch is easier to process into plastic material but has lower mechanical and water resistance properties than cellulose. In this study we combine cellulose and starch to form a bio-composite film, with glycerol to increase processability and flexibility to produce an environmentally friendly packaging material with the desired properties. In this research, Cladophora Algae was used as source of cellulose in this study. Cellulose extracted from Cladophora algae is having excellent mechanical properties compared from the other sources. The result showed that the bio-composite shows excellent tensile strength and water resistance, with optimal strength and water resistance obtained 80.16 MPa in 70% starch content and 5.83% mass loss at 60% starch respectively. Flexibility has increased, with the highest elongation at 12,7%. These results indicate that cellulose-starch bio-composite are promising to be developed as green sustainable packaging materials

What problem does this paper attempt to address?

The main problem that this paper attempts to solve is to develop an environmentally - friendly packaging material to replace traditional plastic packaging. Specifically, the research aims to use cellulose and starch extracted from Cladophora algae to prepare biocomposites, thereby producing green packaging materials with excellent mechanical properties, water resistance and biodegradability.

### Problem Background

1. **Plastic Pollution Problem**:
- Plastic is an indispensable part of modern society, but its waste is difficult to degrade, resulting in serious environmental pollution problems. In 2015, the global plastic production reached 381 million tons, of which about 146 million tons were used in the packaging industry.
- Petroleum - based plastics not only rely on non - renewable resources, but also take a long time to degrade in the natural environment. Eventually, they are often piled up in landfills or scattered in the ocean, causing serious harm to the ecosystem.

2. **Limitations of Existing Solutions**:
- Although cellulose, as a natural polymer, has excellent mechanical properties and degradability, it has problems of brittleness and difficult processing.
- Although starch is easy to process, its mechanical properties and water resistance are not as good as those of cellulose.

### Solution

To overcome the above problems, researchers proposed to combine cellulose with starch and add glycerol as a plasticizer to improve its processing performance and flexibility. In this way, biocomposites with both high tensile strength and good water resistance can be prepared.

### Experimental Design

- **Material Sources**: Cladophora algae are used as the source of cellulose because they have a high degree of crystallinity and a unique network structure, which can provide better mechanical properties.
- **Preparation Methods**: Cellulose is extracted through a series of chemical treatments (such as alkali delignification, acid treatment, etc.), and then mixed with different proportions of starch, and glycerol is added for solution casting to form films.
- **Performance Tests**: Including tensile tests, water immersion tests and biodegradation tests to evaluate the mechanical properties, water resistance and environmental friendliness of the materials.

### Main Results

- **Tensile Strength**: The best tensile strength appears in the sample with 70% starch content, reaching 80.16 MPa.
- **Water Resistance**: The water resistance of all cellulose - starch composites is better than that of pure cellulose films.
- **Biodegradability**: All samples show good biodegradability, especially those containing more starch.

In conclusion, this research has successfully developed a biocomposite based on Cladophora algae cellulose and starch, showing its great potential as an environmentally - friendly packaging material.