Abstract:In mining, the roof structure of a working face with a large mining height in a shallow‐buried coal seam is prone to cutting instability in front of the support, which causes support crushing and coal‐wall spalling. This study analyzes 2201 working faces with large mining heights in the Haiwan No. 3 Mine by investigating the mechanical response law of coal walls under the transient excitation of roof structure instability. A mechanical model of coal walls under dynamic and static load coupling is established, revealing the formation mechanism of coal wall spalling and its main influencing factors. Prevention and control technologies of advanced grooving and pressure relief are proposed, and grooving parameters are determined. Advanced grooving pressure relief can change the roof structure and coal force mechanism to control the position of the roof cutoff break line. These results provide an active‐protection method for controlling coal‐wall spalling in fully mechanised working faces with large mining heights. In mining, the roof structure of a working face with a large mining height in a shallow‐buried coal seam is prone to cutting instability in front of the support, which causes support crushing and coal‐wall spalling. This study analyzes 2201 working faces with large mining heights in the Haiwan No. 3 Mine by investigating the mechanical response law of coal walls under the transient excitation of roof structure instability. A mechanical model of coal walls under dynamic and static load coupling is established, revealing the formation mechanism of coal wall spalling and its main influencing factors. Prevention and control technologies of advanced grooving and pressure relief are proposed, and grooving parameters are determined. The results show that: During the mining process of large mining height working face in shallow buried coal seam, the step change of static response of coal wall is induced by the transient instability of roof structure, and the high abutment pressure is formed on the coal wall. At the same time, the strain energy and gravitational potential energy of roof cutting instability are released to form a dynamic load. Under the action of dynamic and static load, the plastic failure dissipation power of the coal wall is greater than the critical power, and the coal wall spalling occurs. The main influencing factors are mining load, mining height, and internal friction angle of the coal wall. The method of advanced grooving pressure relief can change the roof structure and coal force mechanism, by cutting off the connection between the coal wall and immediate roof, reducing the height of the coal wall force, effectively controlling the position of the roof cut off break line, reducing the static load effect of the roof on the coal, and transferring the position of the dynamic load response to the depth of the coal wall. When the grooving height‐depth ratio k is 0.75, the peak value of the abutment pressure moves 5.57 m to the front of the working face, and the pressure relief effect is the best. The above research results provide an effective active protection method for controlling coal wall spalling in fully mechanised working face with large mining height.

Study on Rib Sloughage Prevention Based on Geological Structure Exploration and Deep Borehole Grouting in Front Abutment Zones

Research on Control of Rib Spalling Disaster in the Three-Soft Coal Seam

Coal Wall Spalling Mechanism and Grouting Reinforcement Technology of Large Mining Height Working Face

Stability mechanism and countermeasure of the solid coal rib in deep gob-side entry retaining: Insights from theoretical analysis numerical simulation

Precise application of grouting technology in underground coal mining: water inrush risk of floor elimination

Mechanism of and Prevention Technology for Water Inrush from Coal Seam Floor under Complex Structural Conditions—A Case Study of the Chensilou Mine

Diffusion Mechanism of Slurry during Grouting in a Fractured Aquifer: A Case Study in Chensilou Coal Mine, China

Gangue grouting filling in subsequent space of coal green mining: methodology and case study

Physical simulation study on grouting water plugging of flexible isolation layer in coal seam mining

Pressure Relief and Bolt Grouting Reinforcement and Width Optimization of Narrow Coal Pillar for Goaf-Side Entry Driving in Deep Thick Coal Seam: A Case Study

Study on key grouting blocking parameters of gas drainage boreholes in soft coal seams

New Insights of Grouting in Coal Mass: From Small-Scale Experiments to Microstructures

The influence of inter-band rock on rib spalling in longwall panel with large mining height

Optimization of small coal pillar width and control measures in gob-side entry excavation of thick coal seams

Performance of New Inorganic Retarding Sealing Material for Gas Drainage Boreholes

Research on Novel Method of Gob-Side Entry Retaining Under the Synergistic Effect of Roof Cutting and Roadside Filling in Thick Coal Seams

Coal‐wall spalling prevention mechanism using advance‐grooving pressure relief in the large‐mining‐height working face of a shallow coal seam

Experimental research on mechanical performance of grouting plugging material with large amount of fly ash

Research on the Influence of Slurry Filling on the Stability of Floor Coal Pillars during Mining above the Room-and-Pillar Goaf: A Case Study

Experimental Study on Floor Damage and Slurry Material Ratio Optimization in Deep and High Confined Water Mining

Rock Strata Failure Behavior of Deep Ordovician Limestone Aquifer and Multi-level Control Technology of Water Inrush Based on Microseismic Monitoring and Numerical Methods