Abstract:The unique properties of zeolites, such as their microporous structure and ion exchange capacity, make them a promising material for water treatment applications. This work explores the synthesis of zeolites from coal fly ash (CFA) using the microwave fusion and hydrothermal synthesis method and investigates their effectiveness in removing heavy metal ions, specifically Cu2+, Zn2+, Ni2+, and Pb2+, from an aqueous solution. Moreover, to overcome the challenge of extracting fine zeolite particles from treated water, a novel method using colloidal PVA solutions to bind magnetite nanoparticles to zeolite was used. The obtained magnetic CFA zeolite was investigated for its adsorption performance and ability to be extracted from water. The experiments included the analysis of adsorption kinetics and the determination of both zeolites adsorption capacity in single and mixed ion systems. The results obtained in this study show that the zeolite synthesized from CFA has excellent adsorption properties for the investigated metal ions. Specifically, in a single ion system, the maximum adsorption capacity of CFA-zeolite was calculated as 495 mg/g for Pb2+, 248 mg/g for Cu2+, 177 mg/g for Zn2+, and 130 mg/g for Ni2+. When tested with the same dosage of zeolite in the mixed ions system, the adsorption capacity was found to be 276 mg/g for Pb2+ and 95 mg/g for Cu2+, while Zn2+ and Ni2+ ions were not adsorbed. Furthermore, the results suggest that the magnetic zeolite composite has excellent adsorption properties. Thus, in mixed ions system its maximum adsorption capacity was found as 261 mg/g, 109 mg/g, 45 mg/g and 42 mg/g for Pb2+, Cu2+, Zn2+ and Ni2+ ions, respectively; the selectivity order of Pb2+ > Cu2+ > Zn2+ > Ni2+ was therefore established for both systems. Additionally, magnetic zeolite was shown to be easily separated from the treated solution using high intensity magnetic separation. Various surface characterization techniques were utilized to examine the zeolite's surface before and after the adsorption of metal ions, and the results suggest an ion exchange mechanism for the studied metals. Overall, this study further highlights the potential of CFA-synthesized zeolites for the removal of heavy metal pollutants from wastewater and provides insights into the mechanisms underlying their adsorption behavior. Moreover, it was demonstrated that the synthesized magnetic CFA zeolite has potential for practical water treatment applications as an effective and sustainable material for the removal of heavy metal pollutants from wastewater. Further investigations are necessary to optimize the use of CFA magnetic zeolites for practical water treatment applications.

Preparation of Honeycomb-Structured Activated Carbon–Zeolite Composites from Modified Fly Ash and the Adsorptive Removal of Pb(II)

Comparison of Physicochemical Properties of Fly Ash Precursor, Na-P1(C) Zeolite–Carbon Composite and Na-P1 Zeolite—Adsorption Affinity to Divalent Pb and Zn Cations

Simultaneous Removal of Pb2+ and Zn2+ Heavy Metals Using Fly Ash Na-X Zeolite and its Carbon Na-X(C) Composite

Removal of Pb2+ from Aqueous Solutions Using K-Type Zeolite Synthesized from Coal Fly Ash

Removal of Pb(Ii) from Aqueous Solution Using Composite Filter Material Made of Fly Ash

Simultaneous removal of inorganic and organic pollutants from multicomponent solutions by the use of zeolitic materials obtained from fly ash waste

Modified fly ash as an effect adsorbent for simultaneous removal of heavy metal cations and anions in wastewater

The study of removal Pb(II) and Ni(II) from aqueous solution by new adsorbent materials of nano-Mg(OH)2/fly ash

Stabilization of lead in waste water and farmland soil using modified coal fly ash

Adsorption of Pb(II) on mesoporous activated carbons fabricated from water hyacinth using H3PO4 activation: Adsorption capacity, kinetic and isotherm studies

Low-temperature aerobic carbonization and activation of cellulosic materials for Pb2+ removal in water source

Synthesis of porous materials by the modification of coal fly ash and its environmentally friendly use for the removal of heavy metals from wastewater

Efficient Removal of Pb 2+ from Water by Bamboo-Derived Thin-Walled Hollow Ellipsoidal Carbon-Based Adsorbent

Zeolite Composite Materials from Fly Ash: An Assessment of Physicochemical and Adsorption Properties

Preparation of activated carbon fibers rich in S/N/O adsorption sites for selective and efficient trace Pb(II) removal from drinking water

In situ growth ZIF-8 on porous chitosan/hydroxyapatite composite fibers for ultra-efficiently eliminating lead ions in wastewater

Removal of heavy metal ions from aqueous solution by zeolite synthesized from fly ash

Possibility of Removing Cadmium Pollution from the Environment Using a Newly Synthesized Material Coal Fly Ash

Zeolite synthesis from coal fly ash and its application to heavy metals remediation from water contaminated with Pb, Cu, Zn and Ni ions

Effective Pb 2+ adsorption by calcium alginate/modified cotton stalk biochar aerogel spheres: With application in actual wastewater

Mild Hydrothermal Synthesis of 11Å-TA from Alumina Extracted Coal Fly Ash and Its Application in Water Adsorption of Heavy Metal Ions (Cu(II) and Pb(II))