Effect of Arch-Wire Coating on Friction of Ceramic Bracket laboratory study

Reem Ahmed,Walaa El Gemaey,Ahmed Abdel Fattah Ramadan,Walaa El gemaey,Ahmed abdel Fattah Ramadan

DOI: https://doi.org/10.21608/dsu.2022.86825.1073

2022-03-01

Dental Science Updates

Abstract:Introduction: The increasing demand for esthetics has promoted the developmentof wires coated with polymeric materials such as polymer matrix reinforced with glassfibers.Thus, the surface and thickness of metallic-coated wires can be modified to affectcorrosive properties, mechanical durability and especially friction forces. Aim: Toevaluate the frictional properties between Teflon coated and non-coated stainless-steelorthodontic arch-wires (0.017 x 0.025-inches and 0.019 x 0.025-inches) with ceramicbrackets of 0.018 and 0.022-inch slots. Material and methods: Sixteen orthodonticmaxillary premolar mono-crystalline ceramic brackets, eight brackets with 0.018-inchand eight brackets with 0.022-inch slot size. Roth prescription were used. Twentystainless-steel 0.017 x 0.025-inch arch-wires were used (ten Teflon coated and ten noncoated).Twenty stainless-steel 0.019 x 0.025-inch arch-wires were used (ten Tefloncoated and ten non-coated). All arch-wires were cut to symmetrical equal halves usinga wire cutter at the midline and each half was used separately. The total number ofwire segments used in the study was eighty orthodontic maxillary stainless-steel archwires.Each ceramic bracket tested five wire segments using new elastomeric moduleseach time. Each bracket was translated the same distance (5mm) relative to its wiresegment by the LR5K Lloyd universal testing machine at the same speed of (5mmper minute). Results: The non-coated 17x25 –inch thickness stainless steel arch-wiresshowed higher friction than coated ones and the non-coated 0.019 x 0.025-inch. Thecoated 0.019x 0.025-inches stainless steel wire segments showed significant highestfriction of 1687.25±97.5 than non-coated 0.019x 0.025-inches and coated/non-coated0.017x 0.025-inches wire segments. Conclusion: The coated stainless-steel arch-wireshad higher friction than the non-coated stainless-steel arch-wires on mono-crystallineceramic brackets.