Abstract:Purpose In vitro patient-specific flexible vascular models are helpful for understanding the haemodynamic changes before and after endovascular treatment and for effective training of neuroendovascular interventionalists. However, it is difficult to fabricate models of overall unified or controllable thickness using existing manufacturing methods. In this study, we developed an improved and easily implemented method by combining 3D printing and brush-spin–coating processes to produce a transparent silicone model of uniform or varied thickness. Methods First, a water-soluble inner-skeleton model, based on clinical data, was printed on a 3D printer. The skeleton model was subsequently fixed in a single-axis-rotation machine to enable continuous coating of silicone, the thickness of which was manually controlled by adsorption and removal of excess silicone in a brush-spinning operation. After the silicone layer was solidified, the inner skeleton was further dissolved in a hot water bath, affording a transparent vascular model with real geometry. To verify the controllability of the coating thickness by using this method, a straight tube, an idealised aneurysm model, a patient-specific aortic arch model, and an abdominal aortic aneurysm model were manufactured. Results The different thicknesses of the manufactured tubes could be well controlled, with the relative standard deviations being 5.6 and 8.1% for the straight and aneurysm tubes, respectively. Despite of the diameter changing from 33 to 20 mm in the patient-specific aorta, the thickness of the fabricated aortic model remains almost the same along the longitudinal direction with a lower standard deviation of 3.1%. In the more complex patient-specific abdominal aneurysm model, varied thicknesses were realized to mimic the measured data from the CT images, where the middle of the aneurysm was with 2 mm and abdominal aorta as well as the iliac arteries had the normal thickness of 2.3 mm. Conclusion Through the brush–spin–coating method, models of different sizes and complexity with prescribed thickness can be manufactured, which will be helpful for developing surgical treatment strategies or training neuroendovascular interventionalists.

3D Vascular Replicas Composed of Elastomer–Hydrogel Skin Multilayers for Simulation of Endovascular Intervention

Slippery Hydrogel with Desiccation-Tolerant ‘skin’ for High-Precision Additive Manufacturing

A Brush–Spin–Coating Method for Fabricating in Vitro Patient-Specific Vascular Models by Coupling 3D-Printing

Fabrication of Hydrogel Tubes with Vascular Mimicked Stiffness for Construction of in Vitro Vascular Models

Fabrication of Compliant and Transparent Hollow Cerebral Vascular Phantoms for In Vitro Studies Using 3D Printing and Spin–Dip Coating

Engineering Tridimensional Hydrogel Tissue and Organ Phantoms with Tunable Springiness

Multifunctional high-simulation 3D-printed hydrogel model manufacturing engineering for surgical training

Fabrication, characterization and numerical validation of a novel thin-wall hydrogel vessel model for cardiovascular research based on a patient-specific stenotic carotid artery bifurcation

Versatile and Tunable Performance of PVA/PAM Tridimensional Hydrogel Models for Tissues and Organs: Augmenting Realism in Advanced Surgical Training

Engineering pre-vascularized 3D tissue and rapid vascular integration with host blood vessels via co-cultured spheroids-laden hydrogel

3D-Printed Hydrogels with Engineered Nanocrystalline Domains as Functional Vascular Constructs

Vascular 3D Printing with a Novel Biological Tissue Mimicking Resin for Patient-Specific Procedure Simulations in Interventional Radiology: a Feasibility Study

Template-assisted electrospinning and 3D printing of multilayered hierarchical vascular grafts

A Biomimetic 3d‐self‐forming Approach for Microvascular Scaffolds

3D-Bioprinted Vascular Scaffold with Tunable Mechanical Properties for Simulating and Promoting Neo-Vascularization

Vascular Deformation for Vascular Interventional Surgery Simulation

Optimized Vascular Network by Stereolithography for Tissue Engineered Skin

A Perfusable Multi‐Hydrogel Vasculature On‐Chip Engineered by 2‐Photon 3D Printing and Scaffold Molding to Improve Microfabrication Fidelity in Hydrogels

Coaxial Embedded Printing of Gelatin Methacryloyl–alginate Double Network Hydrogel for Multilayer Vascular Tubes

Validation of a dynamic 4D microsurgical bypass simulator for training and teaching microvascular anastomosis techniques with blood flow and fluorescence imaging

Three-Dimensionally Printed Elastic Cardiovascular Phantoms for Carotid Angioplasty Training and Personalized Healthcare