Abstract:The poor early shrinkage and cracking performances of manufactured sand concrete, waste powder concrete, and recycled aggregate concrete are the main difficulties in engineering applications. To solve these problems, early shrinkage and cracking, strength, and impermeability tests were performed on high-volume stone powder manufactured sand concrete mixed with fly ash and slag powder (FS), a shrinkage-reducing agent (SRA), polyvinyl alcohol (PVA) fibers, and a superabsorbent polymer (SAP). Furthermore, the microstructures and pore structures of these concretes were revealed using nuclear magnetic resonance (NMR) and scanning electron microscopy (SEM). The results showed that the mixture of FS, SRA, PVA fibers, and SAP could effectively inhibit the shrinkage strain and cracking area of the concrete. The effect of the SAP on reducing the early shrinkage of the concrete is the greatest, and the shrinkage strain can be reduced by 76.49%. The PVA fibers had the most obvious effect on inhibiting the early cracking of the concrete, and the total cracking area was reduced by 66.91%. Significantly, the incorporation of the FS can improve the particle gradation and the pore structure and improve its compactness. The PVA fibers not only provide good carriers for cement-based materials but also enhance the bonding force between the particles inside the concrete, filling the pores inside the concrete, inhibiting the loss of water, and reducing the generation of internal microcracks. The FS and PVA can reduce the shrinkage and cracking risk and improve the strength and impermeability of the concrete. Although the SRA and SAP can reduce the shrinkage and cracking risks, it will lead to a significant decrease in the later strength and impermeability. The main reason is that the SRA leads to an increase in micropores in the matrix and microcracks near the aggregate, which are not conducive to the development of the strength and penetration resistance of the MS. Similarly, the SAP can promote the rapid formation of ettringite (Aft) at an early age and improve the early shrinkage, early cracking, and early strength of the concrete. However, with an increase in age, the residual pores, after SAP dehydration, will cause the deterioration of the concrete pore structure, resulting in the deterioration of the strength and impermeability.

The effect of shrinkage reducing admixtures on drying shrinkage, autogenous deformation, and early age stress development of concrete

Shrinkage and Creep of Sustainable Self-Compacting Concrete with Recycled Concrete Aggregates, Fly Ash, Slag, and Silica Fume

The Effect of Shrinkage-Reducing Admixture on Mechanical Properties and Volume Stability of Concrete

Influence of Superplasticizer and Shrinkage-Reducing Admixtures on Early Age Shrinkage of Concrete

Influence of Mineral Admixtures on early Shrinkage of Ordinary Concrete

A study on early shrinkage of recycled concrete

Influence of Shrinkage Reduce Agent on Early Age Autogenous Shrinkage of Concrete

Effects of Admixtures and SRA on Early Age Shrinkage of Concrete

Early-Age Shrinkage Stress of Alkali-Activated Cement-Free Mortar Using Shrinkage Reducing Agent and Expansive Additive

Effects of shrinkage reducing admixture and internal curing agent on shrinkage and creep of high performance concrete

Mechanism underlying effect of expansive agent and shrinkage reducing admixture on mechanical properties and fiber-matrix bonding of fiber-reinforced mortar

Analytical Prediction and Experimental Research on Shrinkage Cracking of Restrained Early-Age Concrete

Cracking potential of alkali-activated slag and fly ash concrete subjected to restrained autogenous shrinkage

The Influence of Shrinkage-Reducing Agent Solution Properties on Shrinkage of Cementitious Composite Using Grey Correlation Analysis

Influence of Shrinkage Retarder on Early Self-Shrinking of Concrete

Effect of microfibers or SRA on the shrinkage and mechanical properties of alkali activated slag/fly ash-based mortars incorporating recycled fine aggregate

Experimental investigation of ASR-affected concrete – The influence of uniaxial loading on the evolution of mechanical properties, expansion and damage indices

High-Performance Materials Improve the Early Shrinkage, Early Cracking, Strength, Impermeability, and Microstructure of Manufactured Sand Concrete

DEVELOPMENT AND PROPERTY OF CONCRETE SHRINKAGE-REDUCING ADMIXTURE

Design and Control Shrinkage Behavior of High-Strength Self-Consolidating Concrete Using Shrinkage-Reducing Admixture and Super-Absorbent Polymer

Investigating the effects of seawater and sea sand aggregates and supplementary cementitious materials on the early shrinkage and crack resistance of concrete