Abstract:The emergence of a pandemic affecting the respiratory system can result in a significant demand for face masks. This includes the use of cloth masks by large sections of the public, as can be seen during the current global spread of COVID-19. However, there is limited knowledge available on the performance of various commonly available fabrics used in cloth masks. Importantly, there is a need to evaluate filtration efficiencies as a function of aerosol particulate sizes in the 10 nm to 10 μm range, which is particularly relevant for respiratory virus transmission. We have carried out these studies for several common fabrics including cotton, silk, chiffon, flannel, various synthetics, and their combinations. Although the filtration efficiencies for various fabrics when a single layer was used ranged from 5 to 80% and 5 to 95% for particle sizes of <300 nm and >300 nm, respectively, the efficiencies improved when multiple layers were used and when using a specific combination of different fabrics. Filtration efficiencies of the hybrids (such as cotton–silk, cotton–chiffon, cotton–flannel) was >80% (for particles <300 nm) and >90% (for particles >300 nm). We speculate that the enhanced performance of the hybrids is likely due to the combined effect of mechanical and electrostatic-based filtration. Cotton, the most widely used material for cloth masks performs better at higher weave densities (<i>i.e.</i>, thread count) and can make a significant difference in filtration efficiencies. Our studies also imply that gaps (as caused by an improper fit of the mask) can result in over a 60% decrease in the filtration efficiency, implying the need for future cloth mask design studies to take into account issues of "fit" and leakage, while allowing the exhaled air to vent efficiently. Overall, we find that combinations of various commonly available fabrics used in cloth masks can potentially provide significant protection against the transmission of aerosol particles.

Efficacy of masks and face coverings in controlling outward aerosol particle emission from expiratory activities

Relative efficacy of masks and respirators as source control for viral aerosol shedding from people infected with SARS-CoV-2: a controlled human exhaled breath aerosol experimental study

On the utility of cloth facemasks for controlling ejecta during respiratory events

A computational study of expiratory particle transport and vortex dynamics during breathing with and without face masks

Numerical evaluation of face masks for prevention of COVID-19 airborne transmission

How effective are face coverings in reducing transmission of COVID-19?

Aerosol Filtration Efficiency of Common Fabrics Used in Respiratory Cloth Masks

Size-dependent Aerosol Penetration Through Facemasks and Respirators (fmrs) During Simulated Exhalation and Cough

Properties of materials considered for improvised masks

Respiratory aerosol emission from oxygen face masks: Filtering and non-filtering masks measured with a manikin model show potential for reduced emissions

Evaluation of masks and mask material suitability for bioaerosol capture

Face-masks save us from SARS-CoV-2 transmission

Evaluating source control efficacy against exhaled submicron particles: Total outward leakage of surgical masks and half facepiece respirators across a spectrum of particle sizes

Effectiveness of Face Masks in Preventing Airborne Transmission of SARS-CoV-2

Fluid dynamics simulations show that facial masks can suppress the spread of COVID-19 in indoor environments

Filtration performances of non-medical materials as candidates for manufacturing facemasks and respirators

Wearing time and respiratory volume affect the filtration efficiency of masks against aerosols at different sizes

Highly Time-Resolved and Nontargeted Characterization of Volatile Organic Compound Emissions from Face Masks

Developing home-disinfection and filtration efficiency improvement methods for N95 respirators and surgical facial masks: stretching supplies and better protection during the ongoing COVID-19 Pandemic

Efficacy of face coverings in reducing transmission of COVID-19: calculations based on models of droplet capture

How long and effective does a mask protect you from an infected person who emits virus-laden particles: By implementing one-dimensional physics-based modeling