Double transition-metal MXenes: Atomistic design of two-dimensional carbides and nitrides

Weichen Hong,Brian C. Wyatt,Srinivasa Kartik Nemani,Babak Anasori

DOI: https://doi.org/10.1557/mrs.2020.251

IF: 5

2020-10-01

MRS Bulletin

Abstract:Abstract

materials science, multidisciplinary,physics, applied

What problem does this paper attempt to address?

Synthesis and applications of double metal MXenes: A review

Asieh Akhoondi,Mitra Ebrahimi Nejad,Mohammad Yusuf,Tejraj M. Aminabhavi,Khalid Mujasam Batoo,Sami Rtimi

DOI: https://doi.org/10.53063/synsint.2023.32150

2023-06-28

Synthesis and Sintering

Abstract:MXenes are known as a new type of two-dimensional layered materials that are composed of carbide, nitride, or carbonitride of transition metals. In the recent discovery of a new class of MXenes, two transition metals occupy the metal site, called double transition metal MXenes (DTM). These multilayer composites are of interest due to their attractive features such as high ion transport, extensive surface area, and biocompatibility. Some computational methods are used to predict the properties and performance of bimetallic carbonitrides. The most important feature of this category of materials is the stability and amount of formation energy, which directly affects the choice of material in various applications. Density functional theory (DFT) calculations are very beneficial to estimate the thermodynamic stability of DTM MXenes. Of course, proper surface modification with stable terminals is needed to overcome the limitations of DTM MXenes. In this review, the electrochemical, metallic, and magnetic properties of DTM MXene have been presented first. In the following, preparation methods are summarized according to the latest published findings. Then, various applications including hydrogen evolution reactions, anode materials in lithium and sodium batteries, nanomagnetic materials, and special applications have been investigated. Finally, more challenges, prospects, and suggestions for the development of two-dimensional DTM MXenes have been presented.
Two-Dimensional, Ordered, Double Transition Metals Carbides (MXenes).

M. Beidaghi,Jun Lu,B. Anasori,Brian C. Hosler,Yu Xie,Y. Gogotsi,M. Barsoum,P. Kent,L. Hultman

DOI: https://doi.org/10.1021/acsnano.5b03591

IF: 17.1

2015-08-13

ACS Nano

Abstract:The higher the chemical diversity and structural complexity of two-dimensional (2D) materials, the higher the likelihood they possess unique and useful properties. Herein, density functional theory (DFT) is used to predict the existence of two new families of 2D ordered, carbides (MXenes), M'2M″C2 and M'2M″2C3, where M' and M″ are two different early transition metals. In these solids, M' layers sandwich M″ carbide layers. By synthesizing Mo2TiC2Tx, Mo2Ti2C3Tx, and Cr2TiC2Tx (where T is a surface termination), we validated the DFT predictions. Since the Mo and Cr atoms are on the outside, they control the 2D flakes' chemical and electrochemical properties. The latter was proven by showing quite different electrochemical behavior of Mo2TiC2Tx and Ti3C2Tx. This work further expands the family of 2D materials, offering additional choices of structures, chemistries, and ultimately useful properties.

Chemistry,Medicine,Materials Science
Ordered Double Transition Metal MXenes

Sandhya Venkateshalu,Gracita M. Tomboc,Byeongyoon Kim,Jinghong Li,Kwangyeol Lee

DOI: https://doi.org/10.1002/cnma.202200320

IF: 3.82

2022-01-01

ChemNanoMat

Abstract:Since the discovery of MXenes, research has progressed tremendously to explore MXenes with new compositions apart from the conventional Ti 3 C 2 T x . Recently, the MXene family further expanded with the discovery of ordered double transition metal MXenes, wherein the metal sites are occupied by two different transition metals, which can be arranged in‐plane or out‐of‐plane forming i‐MXenes or o‐MXenes, respectively. The feature of optimizing the properties of ordered double transition metal MXenes by precise engineering of the composition, number of metal layers, interlayer spacing, and surface functionalities is distinctive among the existing 2D materials. This review provides a brief overview of the theoretical and experimental studies on the ordered double transition metal MXenes to elucidate its structure and properties. In addition, the recent trends in the synthesis and the effects of fine‐tuning the composition, structure, and functional groups on their electrochemical performance are elaborated. The current challenges faced by these emerging MXenes and future research directions are also proposed.
The world of two-dimensional carbides and nitrides (MXenes)

Armin VahidMohammadi,Johanna Rosen,Yury Gogotsi

DOI: https://doi.org/10.1126/science.abf1581

IF: 56.9

2021-06-11

Science

Abstract:A family of thin materials Two-dimensional (2D) materials have attracted interest because of the unusual properties that emerge in these confined structures. There is a growing family of 2D metal carbides and nitrides known as MXenes that contain an odd number of layers in which metals (M) sandwich carbon or nitrogen (X) layers. VahidMohammadi et al. reviewed the progress in synthesizing this growing library of materials. Mixed-metal combinations can be used, as well as a range of surface terminations, making it possible to tune the properties. However, there are still challenges in improving the synthesis methods and developing techniques that can be scaled up. Science , abf1581, this issue p. eabf1581

multidisciplinary sciences
Prediction of T- and H-Phase Two-Dimensional Transition-Metal Carbides/Nitrides and Their Semiconducting-Metallic Phase Transition.

Chi Chen,Xiao Ji,Kui Xu,Bao Zhang,Ling Miao,Jianjun Jiang

DOI: https://doi.org/10.1002/cphc.201700111

IF: 3.52

2017-01-01

ChemPhysChem

Abstract:The discovery of various two-dimensional (2D) nanomaterials with different phases is fundamentally and technologically intriguing, leading to diverse physical and chemical properties for expanded applications. Herein, we performed systematic first-principles calculations to explore a series of single-layer MXenes (M2 X: M=Sc, Ti, V, Cr, Mn, Zr, Nb, Mo, Hf, Ta; X=C, N). The new H-phase MXenes are firstly predicted, which are compared with the usually synthesized MXenes named as T-phase MXenes on their structure and electronic properties. Semiconducting-metallic transitions could be realized by T-/H- phase transition for Sc2 CO2 , Sc2 CO2 H2 , and Ti2 CO2 . Besides, the differences between MXenes and MoS2 on energy storage are discussed. Our work will provide valuable directions for the discovery of new MXene phases and give a systematic understanding of 2D MXenes.
2D transition metal carbides (MXenes) in metal and ceramic matrix composites

Brian C. Wyatt,Srinivasa Kartik Nemani,Babak Anasori

DOI: https://doi.org/10.1186/s40580-021-00266-7

2021-06-02

Nano Convergence

Abstract:Abstract Two-dimensional transition metal carbides, nitrides, and carbonitrides (known as MXenes) have evolved as competitive materials and fillers for developing composites and hybrids for applications ranging from catalysis, energy storage, selective ion filtration, electromagnetic wave attenuation, and electronic/piezoelectric behavior. MXenes’ incorporation into metal matrix and ceramic matrix composites is a growing field with significant potential due to their impressive mechanical, electrical, and chemical behavior. With about 50 synthesized MXene compositions, the degree of control over their composition and structure paired with their high-temperature stability is unique in the field of 2D materials. As a result, MXenes offer a new avenue for application driven design of functional and structural composites with tailorable mechanical, electrical, and thermochemical properties. In this article, we review recent developments for use of MXenes in metal and ceramic composites and provide an outlook for future research in this field.

materials science, multidisciplinary,physics, applied,nanoscience & nanotechnology
Computational design of double transition metal MXenes with intrinsic magnetic properties

Yinggan Zhang,Zhou Cui,Baisheng Sa,Naihua Miao,Jian Zhou,Zhimei Sun

DOI: https://doi.org/10.1039/d1nh00621e

2022-02-28

Abstract:Two-dimensional transition metal carbides (MXenes) have great potential to achieve intrinsic magnetism due to their available chemical and structural diversity. In this work, by spin-polarized density functional theory calculations, we designed and comprehensively investigated 50 double transition metal (DTM) MXenes MCr2CTx (T = H, O, F, OH, or bare) based on the chemical formula of M2C (M = Sc, Y, Ti, Zr, Hf, V, Nb, Ta, Mo, W). We highlight that ferromagnetic half-metallicity, antiferromagnetic semiconduction, as well as antiferromagnetic half-metallicity have been achieved in the DTM MXenes. Herein, ferromagnetic half-metallic ScCr2C2, ScCr2C2H2, ScCr2C2F2, and YCr2C2H2 are characterized with wide band gaps and high Curie temperatures. Very interestingly, the ScCr2C2-based magnetic tunnel junction presents a tunnel magnetoresistance ratio as high as 176 000%. In addition, the antiferromagnetic semiconducting TiCr2C2, ZrCr2C2, and ZrCr2C2(OH)2, possessing moderate band gaps and high Néel temperatures, have been predicted. Especially, the Néel temperature of ZrCr2C2(OH)2 can reach 425 K. Moreover, the Dirac cone-like band structure feature is highlighted in antiferromagnetic half-metallic ZrCr2C2H2. Our study provides a new potential strategy for designing MXenes in spintronics.
Oxygen functionalization-induced crossover in the tensile properties of the thinnest 2D Ti<sub>2</sub>C MXene

Hongzhi Yu,Ke Xu,Zhisen Zhang,Xuezheng Cao,Jian Weng,Jianyang Wu

DOI: https://doi.org/10.1039/d0tc04637j

IF: 6.4

2021-01-01

Journal of Materials Chemistry C

Abstract:Transition metal carbides/nitrides (MXenes) are a newly emerging class of two-dimensional (2D) materials with technically robust properties, which can be finely tuned via planar surface functionalization. Herein, the critical role of oxygen (O-)functionalization on the tensile mechanical characteristics of the thinnest 2D Ti2C MXene is explored through molecular dynamics (MD) simulations with the first-principles based ReaxFF forcefield. It is demonstrated that the Ti2C sheet shows unique tensile mechanical characteristics that pronouncedly vary with the content of O-functionalization and the stretching direction. In both loading directions, there is an apparent crossover in Young's modulus, failure strength and failure strain. Intriguingly, under armchair directional load, a structural transition from the 1T to the 1T ' phase occurs in the Ti2C region, which has been observed in many transition metal dichalcogenides. However, under zigzag directional strain, two distinct structural transformations take place in pristine and fully O-functionalized Ti2C sheets. When the load is removed, these three structural transformations are reversible, which can be critically understood by analyzing the bond configurations. This study provides important insights into the mechanical behavior and structural transformations of functionalized MXenes.
First-principles Study for Discovery of Novel Synthesizable 2D High-entropy Transition Metal Carbides (MXenes)

Hyun Woo Seong,Min Seok Lee,Ho Jin Ryu

DOI: https://doi.org/10.1039/d2ta09996a

IF: 11.9

2023-02-15

Journal of Materials Chemistry A

Abstract:MXenes have been studied as promising 2D materials for various applications such as semiconductors, energy storage, supercapacitors, electromagnetic shielding, sensors, batteries, and adsorbents. In particular, 2D high-entropy MXenes are expected to improve the physical or chemical properties of MXenes through the combination of various transition metal compositions. However, it is difficult to experimentally investigate novel high-entropy MXene compositions owing to the time and cost limitations. In this study, using first-principles calculations, the synthesizability of high-entropy MXenes was determined by evaluating the thermodynamic stability and exfoliation possibility of high-entropy MAX phases, which are precursors of high-entropy MXenes. High-entropy MXenes were synthesized from Al-based and few-layered HE-MAX phases composed of Ti, Nb, and Ta. Additionally, the thermodynamic stability and exfoliation possibility of high-entropy MAX phases are highly correlated with the lattice distortion factors (the standard deviation of bond length and differences in atomic radii) and the differences in the bond lengths of M-A and M-X, respectively. Out of 756 high-entropy MAX phase candidates, 146 high-entropy MXene compositions were estimated to be synthesizable. Furthermore, we successfully synthesized novel high-entropy MXenes, (TiVNbTa)2C and (TiVNbHfTa)2C, which are expected to have high synthesizability according to our first-principles calculations.

materials science, multidisciplinary,chemistry, physical,energy & fuels
Double transition metal MXenes with wide band gaps and novel magnetic properties

Weiwei Sun,Yu Xie,Paul R C Kent

DOI: https://doi.org/10.1039/c8nr00513c

IF: 6.7

2018-07-05

Nanoscale

Abstract:Novel wide band gaps and magnetism in ordered titanium-vanadium, titanium-chromium, and titanium-manganese carbide and nitride based MXenes are predicted using density functional theory. Based on the recent synthesis of Ti centred double transition metal MXenes, we study MXenes with a central Ti layer and different surface early 3d metals, and various terminations, TiM2X2T (M = V, Cr, Mn; X = C, N; T = H, F, O, OH). While previously studied MXenes are strongly metallic, we predict surface metal and termination dependent metal-insulator transitions in the Cr-N and Mn-N series. A uniquely wide band gap over 1 eV is predicted for TiMn2N2F2 using the HSE06 density functional while the unterminated TiMn2N2 remains metallic. The entire TiCr2C2T series is predicted to be semiconducting. Distinct from the more common Ti-C MXenes, not all combinations of metals and terminations are predicted to be stable. Within the examined sets of materials, anti-ferromagnetic orders are generally most favorable. The new MXenes further extend the range of properties accessible in this family of two-dimensional nanomaterials.
2D-Double transition metal MXenes for spintronics applications: surface functionalization induced ferromagnetic half-metallic complexes

Kripa Dristi Dihingia,Swagata Saikia,N. Yedukondalu,Supriya Saha,G. Narahari Sastry

DOI: https://doi.org/10.48550/arXiv.2211.00846

2022-11-02

Materials Science

Abstract:MXenes are rapidly emerging two-dimensional (2D) materials with thickness, composition, and functionalization-dependent outstanding properties having applications in diverse fields. To disclose nano-spintronic applications of 2D-double transition metal (DTM) carbide and nitride-based pristine and surface-functionalized MXenes (M'2M"X2Tx, M' and M" = Cr, Mo, W; X = C/N; T = -F/-OH/=O), a systematic investigation has been performed on structural stability, magnetic properties and electronic structure using spin-polarized first-principles calculations. 36 stables functionalized MXenes were screened from 144 explored DTM based MXenes. The explored materials exhibit striking properties, having wide range of magnetic ground states, from non-magnetic to ferromagnetic, and then to antiferromagnetic, accompanied by metallic to half-metallic or gapless half-metallic properties, depending on transition metal(s) and terminating group. Mo and W-based MXenes are found to be nonmagnetic and metallic, whereas Cr-Mo and Cr-W-based MXenes are magnetic with varying metallic behavior. W2CrN2O2 and Mo2CrN2O2 systems are found to be ferromagnetic half-metallic 2D materials with a direct band gap of 1.35 eV and 0.77 eV respectively, in the minority spin channel. The comprehensive study on DTM MXenes, provide intrinsic half-metallic properties along with robust ferromagnetism, opens up a class of promising new 2D materials with tunable magnetic and electronic properties for potential device applications in nano-spintronics and electronics.
High-Entropy 2D Carbide MXenes: TiVNbMoC3 and TiVCrMoC3

Srinivasa Kartik Nemani,Bowen Zhang,Brian C Wyatt,Zachary D Hood,Sukriti Manna,Rasoul Khaledialidusti,Weichen Hong,Michael G Sternberg,Subramanian K R S Sankaranarayanan,Babak Anasori

DOI: https://doi.org/10.1021/acsnano.1c02775

IF: 17.1

2021-08-24

ACS Nano

Abstract:Two-dimensional (2D) transition metal carbides and nitrides, known as MXenes, are a fast-growing family of 2D materials. MXenes 2D flakes have n + 1 (n = 1-4) atomic layers of transition metals interleaved by carbon/nitrogen layers, but to-date remain limited in composition to one or two transition metals. In this study, by implementing four transition metals, we report the synthesis of multi-principal-element high-entropy M4C3Tx MXenes. Specifically, we introduce two high-entropy MXenes, TiVNbMoC3Tx and TiVCrMoC3Tx, as well as their precursor TiVNbMoAlC3 and TiVCrMoAlC3 high-entropy MAX phases. We used a combination of real and reciprocal space characterization (X-ray diffraction, X-ray photoelectron spectroscopy, energy dispersive X-ray spectroscopy, and scanning transmission electron microscopy) to establish the structure, phase purity, and equimolar distribution of the four transition metals in high-entropy MAX and MXene phases. We use first-principles calculations to compute the formation energies and explore synthesizability of these high-entropy MAX phases. We also show that when three transition metals are used instead of four, under similar synthesis conditions to those of the four-transition-metal MAX phase, two different MAX phases can be formed (i.e., no pure single-phase forms). This finding indicates the importance of configurational entropy in stabilizing the desired single-phase high-entropy MAX over multiphases of MAX, which is essential for the synthesis of phase-pure high-entropy MXenes. The synthesis of high-entropy MXenes significantly expands the compositional variety of the MXene family to further tune their properties, including electronic, magnetic, electrochemical, catalytic, high temperature stability, and mechanical behavior.
Solid-Solution MXenes: Synthesis, Properties, and Applications

Arunoda Lakmal,Pratiksha B. Thombre,Christopher E. Shuck

DOI: https://doi.org/10.1021/acs.accounts.4c00387

IF: 24.466

2024-10-03

Accounts of Chemical Research

Abstract:ConspectusMXenes, among other two-dimensional (2D) materials such as graphene, hexagonal BN, transition metal dichalcogenides (TMDs), 2D metal-organic frameworks (MOFs), and covalent organic frameworks (COFs), are the fastest growing class discovered thus far. The general formula of MXenes is M(n+1)X(n)T(x), where M, X, and T(x) represent an early transition metal (Ti, V, Nb, Mo, etc.), C and/or N, and the surface functional groups (typically, O, OH, F, Cl), respectively, and n can be between 1...

chemistry, multidisciplinary
2D Transition Metal Carbides (MXenes): Applications as an Electrically Conducting Material

Faisal Shahzad,Aamir Iqbal,Hyerim Kim,Chong Min Koo

DOI: https://doi.org/10.1002/adma.202002159

IF: 29.4

2020-11-04

Advanced Materials

Abstract:<p>Since their discovery in 2011, 2D transition metal carbides, nitrides, and carbonitrides, known as MXenes, have attracted considerable global research interest owing to their outstanding electrical conductivity coupled with light weight, flexibility, transparency, surface chemistry tunability, and easy solution processability. Here, the promising abilities of 2D MXenes, from both experimental and theoretical perspectives, for designing conductive materials for a range of applications, including electromagnetic interference shielding, flexible optoelectronics, sensors, and thermal heaters, are presented.</p>

materials science, multidisciplinary,chemistry, physical,physics, applied, condensed matter,nanoscience & nanotechnology
Covalent surface modifications and superconductivity of two-dimensional metal carbide MXenes

Vladislav Kamysbayev,Alexander S Filatov,Huicheng Hu,Xue Rui,Francisco Lagunas,Di Wang,Robert F Klie,Dmitri V Talapin

DOI: https://doi.org/10.1126/science.aba8311

IF: 56.9

2020-08-21

Science

Abstract:Versatile chemical transformations of surface functional groups in two-dimensional transition-metal carbides (MXenes) open up a previously unexplored design space for this broad class of functional materials. We introduce a general strategy to install and remove surface groups by performing substitution and elimination reactions in molten inorganic salts. Successful synthesis of MXenes with oxygen, imido, sulfur, chlorine, selenium, bromine, and tellurium surface terminations, as well as bare MXenes (no surface termination), was demonstrated. These MXenes show distinctive structural and electronic properties. For example, the surface groups control interatomic distances in the MXene lattice, and Ti n +1C n (n = 1, 2) MXenes terminated with telluride (Te2-) ligands show a giant (>18%) in-plane lattice expansion compared with the unstrained titanium carbide lattice. The surface groups also control superconductivity of niobium carbide MXenes.
Tailoring Electronic and Optical Properties of MXenes through Forming Solid Solutions

Meikang Han,Kathleen Maleski,Christopher Eugene Shuck,Yizhou Yang,James T Glazar,Alexandre C Foucher,Kanit Hantanasirisakul,Asia Sarycheva,Nathan C Frey,Steven J May,Vivek B Shenoy,Eric A Stach,Yury Gogotsi

DOI: https://doi.org/10.1021/jacs.0c07395

2020-11-11

Abstract:Alloying is a long-established strategy to tailor properties of metals for specific applications, thus retaining or enhancing the principal elemental characteristics while offering additional functionality from the added elements. We propose a similar approach to the control of properties of two-dimensional transition metal carbides known as MXenes. MXenes (Mn+1Xn) have two sites for compositional variation: elemental substitution on both the metal (M) and carbon/nitrogen (X) sites presents promising routes for tailoring the chemical, optical, electronic, or mechanical properties of MXenes. Herein, we systematically investigated three interrelated binary solid-solution MXene systems based on Ti, Nb, and/or V at the M-site in a M2XTx structure (Ti2-yNbyCTx, Ti2-yVyCTx, and V2-yNbyCTx, where Tx stands for surface terminations) showing the evolution of electronic and optical properties as a function of composition. All three MXene systems show unlimited solubility and random distribution of metal elements in the metal sublattice. Optically, the MXene systems are tailorable in a nonlinear fashion, with absorption peaks from ultraviolet to near-infrared wavelength. The macroscopic electrical conductivity of solid solution MXenes can be controllably varied over 3 orders of magnitude at room temperature and 6 orders of magnitude from 10 to 300 K. This work greatly increases the number of nonstoichiometric MXenes reported to date and opens avenues for controlling physical properties of different MXenes with a limitless number of compositions possible through M-site solid solutions.
25th Anniversary Article: MXenes: A New Family of Two-Dimensional Materials

Michael Naguib,Vadym N. Mochalin,Michel W. Barsoum,Yury Gogotsi

DOI: https://doi.org/10.1002/adma.201304138

IF: 29.4

2013-12-19

Advanced Materials

Abstract:Recently a new, large family of two-dimensional (2D) early transition metal carbides and carbonitrides, called MXenes, was discovered. MXenes are produced by selective etching of the A element from the MAX phases, which are metallically conductive, layered solids connected by strong metallic, ionic, and covalent bonds, such as Ti2 AlC, Ti3 AlC2 , and Ta4 AlC3 . MXenes -combine the metallic conductivity of transition metal carbides with the hydrophilic nature of their hydroxyl or oxygen terminated surfaces. In essence, they behave as "conductive clays". This article reviews progress-both -experimental and theoretical-on their synthesis, structure, properties, intercalation, delamination, and potential applications. MXenes are expected to be good candidates for a host of applications. They have already shown promising performance in electrochemical energy storage systems. A detailed outlook for future research on MXenes is also presented.

materials science, multidisciplinary,chemistry, physical,physics, applied, condensed matter,nanoscience & nanotechnology
2D MXenes: Tunable Mechanical and Tribological Properties

Brian C. Wyatt,Andreas Rosenkranz,Babak Anasori

DOI: https://doi.org/10.1002/adma.202007973

IF: 29.4

2021-03-18

Advanced Materials

Abstract:2D transition metal carbides, nitrides, and carbonitrides, known as MXenes, were discovered in 2011 and have grown to prominence in energy storage, catalysis, electromagnetic interference shielding, wireless communications, electronic, sensors, and environmental and biomedical applications. In addition to their high electrical conductivity and electrochemically active behavior, MXenes' mechanical properties, flexibility, and strong adhesion properties play crucial roles in almost all of these growing applications. Although these properties prove to be critical in MXenes' impressive performance, the mechanical and tribological understanding of MXenes, as well as their relation to the synthesis process, is yet to be fully explored. Here, a fundamental overview of MXenes' mechanical and tribological properties is provided and the effects of MXenes' compositions, synthesis, and processing steps on these properties are discussed. Additionally, a critical perspective of the compositional control of MXenes for innovative structural, low-friction, and low-wear performance in current and upcoming applications of MXenes is provided. It is established here that the fundamental understanding of MXenes' mechanical and tribological behavior is essential for their quickly growing applications.

materials science, multidisciplinary,chemistry, physical,physics, applied, condensed matter,nanoscience & nanotechnology
The oxidation and thermal stability of two-dimensional transition metal carbides and/or carbonitrides (MXenes) and the improvement based on their surface state

Zixiang Zheng,Chunyu Guo,Enhui Wang,Zhijun He,Tongxiang Liang,Tao Yang,Xinmei Hou

DOI: https://doi.org/10.1039/d1qi00041a

IF: 7.779

2021-01-01

Inorganic Chemistry Frontiers

Abstract:This work provides a comprehensive review focusing on the current research on the stability of MXenes and the methods to improve their stability.

chemistry, inorganic & nuclear
Design of Atomic Ordering in Mo2Nb2C3Tx MXenes for Hydrogen Evolution Electrocatalysis

Brian C Wyatt,Anupma Thakur,Kat Nykiel,Zachary D Hood,Shiba P Adhikari,Krista K Pulley,Wyatt J Highland,Alejandro Strachan,Babak Anasori

DOI: https://doi.org/10.1021/acs.nanolett.2c04287

2023-02-08

Abstract:The need for novel materials for energy storage and generation calls for chemical control at the atomic scale in nanomaterials. Ordered double-transition-metal MXenes expanded the chemical diversity of the family of atomically layered 2D materials since their discovery in 2015. However, atomistic tunability of ordered MXenes to achieve ideal composition-property relationships has not been yet possible. In this study, we demonstrate the synthesis of Mo2+αNb2-αAlC3 MAX phases (0 ≤ α ≤ 0.3) and confirm the preferential ordering behavior of Mo and Nb in the outer and inner M layers, respectively, using density functional theory, Rietveld refinement, and electron microscopy methods. We also synthesize their 2D derivative Mo2+αNb2-αC3Tx MXenes and exemplify the effect of preferential ordering on their hydrogen evolution reaction electrocatalytic behavior. This study seeks to inspire further exploration of the ordered double-transition-metal MXene family and contribute composition-behavior tools toward application-driven design of 2D materials.

Double transition-metal MXenes: Atomistic design of two-dimensional carbides and nitrides

Synthesis and applications of double metal MXenes: A review

Two-Dimensional, Ordered, Double Transition Metals Carbides (MXenes).

Ordered Double Transition Metal MXenes

The world of two-dimensional carbides and nitrides (MXenes)

Prediction of T- and H-Phase Two-Dimensional Transition-Metal Carbides/Nitrides and Their Semiconducting-Metallic Phase Transition.

2D transition metal carbides (MXenes) in metal and ceramic matrix composites

Computational design of double transition metal MXenes with intrinsic magnetic properties

Oxygen functionalization-induced crossover in the tensile properties of the thinnest 2D Ti<sub>2</sub>C MXene

First-principles Study for Discovery of Novel Synthesizable 2D High-entropy Transition Metal Carbides (MXenes)

Double transition metal MXenes with wide band gaps and novel magnetic properties

2D-Double transition metal MXenes for spintronics applications: surface functionalization induced ferromagnetic half-metallic complexes

High-Entropy 2D Carbide MXenes: TiVNbMoC3 and TiVCrMoC3

Solid-Solution MXenes: Synthesis, Properties, and Applications

2D Transition Metal Carbides (MXenes): Applications as an Electrically Conducting Material

Covalent surface modifications and superconductivity of two-dimensional metal carbide MXenes

Tailoring Electronic and Optical Properties of MXenes through Forming Solid Solutions

25th Anniversary Article: MXenes: A New Family of Two-Dimensional Materials

2D MXenes: Tunable Mechanical and Tribological Properties

The oxidation and thermal stability of two-dimensional transition metal carbides and/or carbonitrides (MXenes) and the improvement based on their surface state

Design of Atomic Ordering in Mo2Nb2C3Tx MXenes for Hydrogen Evolution Electrocatalysis