Abstract:In Ethiopia, there is a significant amount of agricultural residues produced, and finding sustainable ways to recycle them can help to avoid the negative impacts of improper disposal in landfills. The objective of this study is to evaluate the mechanical and physical properties of particleboard (PB) made from reused coffee husk (CH), maize cob (MC) residues, and lowland bamboo (LB) chips. The particles used ranged from 0.75 mm to 3 mm length, and boards were manufactured with different weight ratios of these materials. The particles were bonded together using a 12% urea‐formaldehyde resin (UFR), and a hot‐pressing machine was utilized to create the PB. Experimental tests were conducted on the PB to assess its mechanical properties (bending, compressive, and impact strength), both in dry and wet conditions, and also physical properties (density, water absorption, moisture content, and thermogravimetric analysis) and evaluated following the standards set by JIS A 5908 and ASTM D 1037. In comparison, PB crafted from 75% bamboo, 12.5% CH, and 12.5% MC exhibited superior mechanical and physical characteristics as compared with other types of PBs. Conversely, 12.5% bamboo, 75% CH, and 12.5% MC showed the weakest performance in both wet and dry conditions. The efficacy of the proposed solution was confirmed through testing against the commercial eucalyptus tree particleboard (EPB) and industry standards. In both dry and wet conditions, the mechanical properties of PB were enhanced by increasing the bamboo particle content and reducing the CH and MC particles. The experimental findings revealed that the proposed solution had superior bending, compressive, and impact strength compared with commercial products by 13.05%, 23.06%, and 14.07% in dry conditions and 23.03%, 15.45%, and 21.25% in wet conditions, respectively, and meeting IS3087 standards. This suggests that the proposed solution comprising 75% bamboo, 12.5% CH, and 12.5% MC particles could serve as a viable alternative to commercial EPB, thereby safeguarding the environment from the adverse effects of eucalyptus trees.

Modification of rice biomass wastes for eco-friendly particleboard

Modification on the Chemi-mechanical Pulping Property of Rice Straw with Alkali-urea System

Mechanical and Water Soaking Properties of Medium Density Fiberboard with Wood Fiber and Soybean Protein Adhesive.

Evaluation of durability performance of rice husk - cement bonded particleboards

Medium-density particleboards from modified rice husks and soybean protein concentrate-based adhesives

Utilization of sweet sorghum bagasse and citric acid in the manufacturing of particleboard. III: Influence of adding sucrose on the properties of particleboard

Performance of Particleboard Made of Agroforestry Residues Bonded with Thermosetting Adhesive Derived from Waste Styrofoam

Physical and Mechanical Properties of Particleboard from Petung Bamboo-waste using Eco-friendly Chitosan-starch Adhesive

Effect of corn stalks and palm fibers ratio on physical, mechanical, and durability properties of particleboard

Materials mix ratio and binder type effects on physical and mechanical properties of particleboard from mixed-wood sawdust and Cocos nucifera (Coconut) husks

Physical and Mechanical Properties of Particleboard Produced from Some Timber Trees Irrigated with Treated Wastewater

Evaluation of physical and mechanical properties of particleboard made from Petung bamboo using sucrose-based adhesive

Experimental Investigation on the Mechanical and Physical Properties of Particleboard From Residual Materials With Lowland Bamboo Chip Composition

Characterization of composite material from the copolymerized polyphenolic matrix with treated cassava peels starch

Optimum condition of manufacturing hybrid particleboard from mixture of cocoa pod husk and bamboo particles

Feasibility and properties of flat-pressed three-layer bamboo-rubberwood particleboards for resource-efficient production

Recycling Polyurethane Materials to Improve Properties of Wood Composite Panels

Particleboard from waste tea leaves and wood particles

Mechanical properties of particleboard made from leather shavings and waste papers

Feasibility of substituting old corrugated carton pulp with thermal alkali and enzyme pretreated semichemical mechanical rice straw pulp

Optimizing paper sludge content and particle size to enhance particleboard properties