Abstract:A dual-machine horizontal automatic drilling and riveting system for aircraft panel assembly is presented in this paper. Two cooperative machines are adopted, like a two-robot system, to achieve the unobstructed workspace, so it can be applied in an efficient assembly line. Different from the current deign wisdom to ensuring the riveting accuracy by increasing the machine stiffness, which detrimentally results in higher masses to be moved and sophisticated reinforcements being used, this paper proposes a disturbance observer (DOB) based design method of riveting force controller for adaptive riveting with high accuracy driven heads, reducing the dependence of automatic riveting on high stiffness of machine. This method simplifies the force-induced deformation error compensation problem to a force control problem, which has rarely been studied before in literature. The separate layout leads to weak machine stiffness in the whole workspace and the stiffness varies with machine pose greatly, which makes it difficult to establish an accurate force-induced deformation error compensation model. To make the riveting machine precisely generate the desired force under such stiffness-varying conditions, a robust control algorithm is designed: the disturbance observer is introduced to address the robust stability against model parameter variance caused by the change of system stiffness with pose, and the feedforward controller can achieve the high-bandwidth force control to ensure the riveting efficiency. The model identification experiments are carried out for different machine stiffness. Validation riveting experiments have been conducted to verify the proposed controller on the dual-machine riveting system. The results show that, compared with previous displacement control, the proposed force controller can ensure the consistency of driven heads through accurate force control.

High Precision Machining Force Control of VCM-driven Deburring Equipment

Hybrid Position/Force Control for Dual-Machine Drilling and Riveting System

Dynamic Cutting Force Modeling and Experimental Study of Industrial Robotic Boring

Robust Force Tracking Impedance Control of an Ultrasonic Motor-actuated End-effector in a Soft Environment.

Control of tool/workpiece contact force with application to robotic deburring

Design of DOB-based Riveting Force Controller for Dual-Machine Horizontal Drilling and Riveting System

Robust Control of High Speed High Precision Linear Motion System

Model-Based Nonlinear Control of the Dielectric Elastomer Actuator with High Robustness and Precision

Vibration Analysis and Suppression in Robotic Boring Process

Robotic Precision Force Control in Optical Machining a Fuzzy Admittance Approach

An Approach to Automated Deburring by Robot Manipulators

Intelligent robot deburring using adaptive fuzzy hybrid position/force control

A human mimicking control strategy for robotic deburring of hard materials

Suppress Vibration on Robotic Polishing with Impedance Matching

Modeling and force control of a pneumoelectric end-effector for robotic continuous contact operations

Compliance Control of Deburring Robots Based on Force Impedance

Automated Robotic Deburring of Parts Using Compliance Control

High-accurate Cutting Forces Estimation by Machine Learning with Voice Coil Motor-Driven Fast Tool Servo for Micro/nano Cutting

Precision robotic deburring with Simultaneous Registration and Machining for improved accuracy, quality, and efficiency

Modeling, Identification, and Adaptive Robust Motion Control of Voice-Coil Motor Driven Stages