Abstract:Past research has shown that advancing diesel injection timing is a promising approach to decrease the unburned methane and greenhouse gas (GHG) emissions of natural gas/diesel dual-fuel engines at lower engine loads. However, this benefit may not persist under medium to high load-low speed conditions. To explore this, the present paper uses experiments and detailed computational fluid dynamic (CFD) modeling to investigate the impacts of diesel injection timing on the combustion and emissions performance of a heavy-duty natural gas/diesel dual-fuel engine under four different engine load-speed conditions. The results showed that advancing diesel injection timing increases the peak pressure, thermal efficiency, and NOx emissions for all examined engine load-speed conditions. Advancing diesel injection timing also significantly decreases the unburned methane and CO2-equivalent (GHG) emissions of the dual-fuel engine under low load-low speed and medium load-high speed conditions. The concentration of OH and CH4 revealed that the central part of the combustion chamber is the main source of the unburned methane emissions under low load-low speed and medium load-high speed conditions, and advancing diesel injection timing significantly improves the combustion of natural gas-air mixture in this region. However, advancing diesel injection timing slightly increases the unburned methane emissions trapped in the crevice volume. However, this slight increase in the unburned methane emissions in the crevice volume is much lower than its significant decrease in the central region of the combustion chamber. At medium to high load-low speed conditions, there is almost no unburned methane in the central part of the combustion chamber, and the crevice region is considered as the main source of unburned methane emissions. As a result, advancing diesel injection timing does not improve the combustion of natural gas-air mixture in the central part of the combustion chamber but slightly increases the unburned methane trapped in the crevice region. This is the main reason that advancing diesel injection timing slightly increases the unburned methane emissions under medium to high load-low speed conditions. Overall, advancing diesel injection timing significantly increases thermal efficiency and decreases the unburned methane and GHG emissions under low load-low speed and medium load-high speed conditions. It improves the thermal efficiency under medium to high load-low speed conditions, but comes at the expense of increased methane and unchanged GHG emissions.

Assessment of the impacts of combustion chamber bowl geometry and injection timing on a reactivity controlled compression ignition engine at low and high load conditions

Analysis of Two-Stage Natural-Gas Lean Combustion Inside a Diesel Geometry

Effect of injector configurations on combustion and emissions in a gasoline direct-injection compression ignition engine under low-load conditions

Evaluation of the effects of injection timing and rate-shape on diesel low temperature combustion using advanced CFD modeling

Numerical Investigation of the Effect of Injection Timing on the In-Cylinder Activity of a Gasoline Direct Injection Engine

Numerical Investigations of Injection Timing Effects on a GDI Engine Performance: Part B, In-Cylinder Emission Formation and Oxidation Process

Combustion performance characteristics of double-layer diverging combustion chamber compared with re-entrant chamber and omega chamber

Effects of piston bowl geometry on combustion and emission characteristics of biodiesel fueled diesel engines

Assessing the impact of injector included angle and piston geometry on thermally stratified compression ignition with wet ethanol

Effects of Piston Bowl Geometries On Diesel and Gasoline Dual-Fuel Combustion under Low Load Conditions

Effect of diesel injection timing on the combustion of natural gas/diesel dual-fuel engine at low-high load and low-high speed conditions

Exploring the Combustion Performance of a Non-Road Air-Cooled Two-Cylinder Turbocharged Diesel Engine

Impact of engine control variables on low load combustion efficiency and exhaust emissions of a methane-diesel dual fuel engine

Effects of Rate-Shaped and Multiple Injection Strategies on Pollutant Emissions, Combustion Noise and Fuel Consumption in a Low Compression Ratio Diesel Engine

An experimental investigation of the combustion process and the injection strategy of a heavy-duty diesel engine equipped with a common rail fuel injection system

The Combined Effect of the Piston Bowl Geometry and Injection Fuel Pressure on the Compression Ignition Engine Characteristics

Extension of the Lower Load Limit in Dieseline Compression Ignition Mode

Evidence for circulating complexes containing IgE in patients with atopic dermatitis.

The Impact of Fuel and Injection Strategy on Combustion Characteristics, Emissions and Efficiency in Gasoline Compression Ignition Operation

Investigation of piston bowl geometry, injection timing, and EGR mass fraction to improve the performance of ISM 370 diesel engine

Optimization of the piston geometry of a diesel engine using a two-spray-angle nozzle