Abstract:Background Difficulties during the wound healing process may result in scarring, chronic wounds and sepsis. A common tissue engineering strategy to solve these problems rely on the development of 3D hydrogel scaffolds that mimic the structure, stiffness, and biological proprieties of the target tissue. One of the most effective biofabrication techniques to precisely control spatial deposition, architecture and porosity of hydrogels is 3D printing technology. However, final architectures of 3D printed structures can be compromised if the printing properties are not adequately selected. Purpose Our main goal was to create a numerical framework able to predict the deformations that arise due to the 3D printing process of hydrogel scaffolds. Our secondary goal was to analyze if the overall mechanical properties of the 3D printed scaffolds were affected by these deformations. Methods We applied finite element analysis using ABAQUS finite element software to develop our numerical framework. The finite elements were added in a time sequence, simulating the material deposition. The bulk material was experimentally characterized and represented numerically by the user-defined subroutine UMAT. We tested the simulation by 'printing' a 5.0 × 5.0 × 0.8 alginate ink at 5 and 10 mm/s. Afterwards, both the final 3D printed scaffolds and a theoretical non-deformed configuration were subjected to a uniaxial compression of 10 % of the initial height, and differences between their overall mechanical properties were analyzed. Results The numerical framework captured the bending between the scaffold filaments and the compression of the bottom layers. On average, the scaffold printed at 5 mm/s deformed ∼6 % more, compared to the scaffold printed at 10 mm/s. However, in terms of overall mechanical properties, both showed similar behavior. This behavior, however, was highly nonlinear and significantly different from the theoretical, non-deformed scaffold, particularly in a small strains' regime. Conclusions A numerical framework that can be used as a preliminary tool to define the printing velocity, sequence and geometry, minimizing the deformations during the 3D printing process was developed. This framework can help to minimize experimentation and consequently, material waste. We also saw that these deformations should not be neglected when predicting the mechanical behavior using finite element analysis, particularly for small strains application.

Modeling the Three-Dimensional Bioprinting Process of β-Sheet Self-Assembling Peptide Hydrogel Scaffolds

Projection-based 3D Bioprinting for Hydrogel Scaffold Manufacturing

Direct 3D Printed Biomimetic Scaffolds Based on Hydrogel Microparticles for Cell Spheroid Growth

Modeling the Printability of Photocuring and Strength Adjustable Hydrogel Bioink During Projection-Based 3D Bioprinting.

Three-dimensional (3D) bioprinting of medium toughened dipeptide hydrogel scaffolds with Hofmeister effect

Fiber Thickness and Porosity Control in a Biopolymer Scaffold 3D Printed through a Converted Commercial FDM Device

Advanced optical assessment and modeling of extrusion bioprinting

Tailoring the Microarchitectures of 3D Printed Bone-like Scaffolds for Tissue Engineering Applications

New Strategies for High Efficiency and Precision Bioprinting by DOE Technology and Machine Learning

3D Bioprinting Microgels: Direct 3D Printed Biomimetic Scaffolds Based on Hydrogel Microparticles for Cell Spheroid Growth (Adv. Funct. Mater. 13/2020)

3D-printed scaffolds for tissue engineering applications using thermosensitive hydrogels based on biopolymer blends

Development of a five-axis printer for the fabrication of hybrid 3D scaffolds: From soft to hard phases and planar to curved surfaces

Low-Concentration Gelatin Methacryloyl Hydrogel with Tunable 3D Extrusion Printability and Cytocompatibility: Exploring Quantitative Process Science and Biophysical Properties

Simulating 3D printing on hydrogel inks: A finite element framework for predicting mechanical properties and scaffold deformation

Aspiration-assisted Freeform Bioprinting of Pre-Fabricated Tissue Spheroids in a Yield-Stress Gel

Optimization of the Rheological Properties of Self-Assembled Tripeptide/Alginate/Cellulose Hydrogels for 3D Printing

Stepwise Cross-Linking of Fibroin and Hyaluronic for 3D Printing Flexible Scaffolds with Tunable Mechanical Properties

Advancing scaffold porosity through a machine learning framework in extrusion based 3D bioprinting

Hybrid 3D Printing of Synthetic and Cell‐Laden Bioinks for Shape Retaining Soft Tissue Grafts

Prediction of the mechanical response of a 3D (bio)printed hybrid scaffold for improving bone tissue regeneration by structural finite element analysis

Self-assembling Tetrameric Peptides Allow in Situ 3D Bioprinting under Physiological Conditions