Abstract:3-Methyl-3-penten-2-one (3M3P) is an essential intermediate for the production of synthetic ketone fragrances such as Iso E Super. The traditional batch production of 3M3P suffers from low selectivity and efficiency along with the drawbacks of using homogeneous catalysts; hence, major improvements are needed to upgrade the production in a sustainable way. This work is the first to provide an eco-efficient replacement of batch-stirred tank reactors (BSTRs) with continuous technologies based on a fixed bed reactor (FBR) and a reactive distillation column (RDC), combined with using heterogeneous catalysts in order to intensify the synthesis of 3M3P. The effect of reaction conditions on 3M3P synthesis was investigated experimentally, and rigorous simulations were used to scale up the processes. The 3M3P yields are similar in the BSTR and FBR, but the FBR-based alternative can reduce the energy use by 34.4% and the total annual cost (TAC) by 48.4%. The process combining an RDC and an FBR allows yields of up to 95.8% (about 13% higher than in the BSTR) because of the ability of reactive distillation (RD) to remove continuously the intermediate from the reactive section and avoid the side reactions. Compared to the traditional BSTR-based process, the energy usage for the RDC + FBR-based technology is reduced by 42%, the TAC is 53% lower, the CO<sub>2</sub> emissions are reduced by 11.7% and the waste by 87.3%, while the mass efficiency is improved by 11.5%. The results of this work provide a strong basis for development, design, and improvement of more sustainable 3M3P production technologies.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acssuschemeng.0c05908?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acssuschemeng.0c05908</a>.Details about TAC calculations; equipment sizing; TCC; and TOC (<a class="ext-link" href="/doi/suppl/10.1021/acssuschemeng.0c05908/suppl_file/sc0c05908_si_001.pdf">PDF</a>)This article has not yet been cited by other publications.

Development of a Green and Sustainable Manufacturing Process for Gefapixant Citrate (MK-7264) Part 2: Development of a Robust Process for Phenol Synthesis

Development of a Green and Sustainable Manufacturing Process for Gefapixant Citrate (MK-7264) Part 1: Introduction and Process Overview

Synthesis technology of 3-n-propyl-2, 4-dihydroxyacetophenone

Improved Synthetic Process for 3-Benzyloxy-4-n-butylaniline Hydrochloride

Evolution of a Green and Sustainable Manufacturing Process for Belzutifan: Part 3─Development of a Scalable Enzymatic Oxidation Process

Manufacturing Process Development for Belzutifan, Part 2: A Continuous Flow Visible-Light-Induced Benzylic Bromination

Development of a Cost-Efficient Process Toward a Key Synthetic Intermediate of the EZH2 Inhibitor PF-06821497

Evolution of a Green and Sustainable Manufacturing Process for Belzutifan: Part 1─Process History and Development Strategy

Manufacturing Process Development for Belzutifan, Part 3: Completing a Streamlined Through-Process with a Safe and Scalable Oxidation

Manufacturing Process Development for Belzutifan, Part 6: Ensuring Scalability for a Deoxyfluorination Reaction

Early Process Development of CH7057288, a Benzofuran-Containing Selective NTRK Inhibitor

Design and Optimization of a Greener Sinomenine Hydrochloride Preparation Process Considering Variations among Different Batches of the Medicinal Herb

From Batch to Continuous Sustainable Production of 3-Methyl-3-penten-2-one for Synthetic Ketone Fragrances

Development Of A Concise, Scalable Synthesis Of A Ccr1 Antagonist Utilizing A Continuous Flow Curtius Rearrangement

Building a Quaternary Stereogenic Center on Dihydroazaindole Carboxylic Acid through Scalable Process Development

Production of biomass‐derived p‐hydroxybenzamide: Synthesis of p‐aminophenol and paracetamol

An Improved Process For The Preparation Of Diphenylmethyl 7 Beta-Phenylacetamido-3-Hydroxymethyl-3-Cephem-4-Carboxylate

Evolution of a Green and Sustainable Manufacturing Process for Belzutifan: Part 5─Chemoenzymatic Diastereoselective Fluorination/DKR

Toward the Development of a Manufacturing Process for Milvexian: Scale-Up Synthesis of the Side Chain

Scalable Process of Spiro(cyclopropane)oxazepane Pyridine Carboxylic Acid Through Kulinkovich, Mitsunobu, and Pd-Catalyzed Intramolecular C–N Coupling

Development of a Scalable, Stereoselective Second-Generation Route for CXCR7 Antagonist ACT-1004-1239 via Chiral Enamine Reduction and a Novel Telescoped Sequence of Transesterification, cis -to- trans Epimerization, and Saponification