Abstract:Abstract Hydraulic fracturing (fracing) is the most effective technique for improving the productivity of gas condensate reservoirs. The water used during fracing creates the conductivity needed for production, however, it will also create water blockage in the path of gas flow. The pressure and flow rate behavior of a gas condensate reservoir is distinctly different from the behavior of a solution gas drive reservoir. The producing rate is not only affected by the pressure gradient but is also a more complex function of the actual value of the flowing bottomhole pressure. Initially, the additional pressure required during flowback is needed to produce the water used during fracturing. The reservoir energy to lift this water to the surface requires more pressure drop around the wellbore. Additionally, unnecessary water used during fracing operations incrementally increases the pressure drop near the wellbore. Increased pressure drop leads the formation to reach the dew point sooner and condensate banking start to build in the fracture system. Increased condensate banking leaves valuable liquid hydrocarbon in the reservoir. Water blockages reduce well productivity and speed up the condensate damage due to the high-pressure drop required. An innovative pattern recognition and machine learning technology was applied in real-time during fracture treatment to increase fracture complexity, improve fracture conductivity, increase diffusion surface area, and improve stage productivity index. This technology focuses on creating the most stimulated fracture surface area per volume of water injected, resulting in the same fracture surface area but with a large reduction in water injected. The reduction of the water leads to an improved well productivity index by minimizing water blockage around the wellbore. Increasing fracture surface area per volume of frac water injected has a positive impact on the post-frac productivity of treated wells by increasing condensate production rates with less drawdown compared with traditional frac designs. In addition, using the optimum water volume has reduced the cost of fracturing operations and the cost of water flow back disposal leading to significant increases in well Net Present Value (NPV). A field case will be presented with condensate performance. The use of real-time fracture optimization technology with the integration of rock and reservoir fluid properties leads to better well performance. Production benefits of increased condensate production result in no reserves being lost-in-place to condensate blockage. Added ESG benefits are reduced superfluous water use, pump time, and water disposal costs.

A Data-Driven Water-Soaking Model for Optimizing Shut-In Time of Shale Gas/Oil Wells Prior to Flowback of Fracturing Fluids

An Optimal Model for Determination Shut-In Time Post-Hydraulic Fracturing of Shale Gas Wells: Model, Validation, and Application

Hydrodynamic Equilibrium Simulation and Shut-in Time Optimization for Hydraulically Fractured Shale Gas Wells

Impact of Well Shut-in After Hydraulic-Fracture Treatments on Productivity and Recovery in Shale Oil Reservoirs

Strategies for Optimizing Shut-In Time: New Insights from Shale Long-Term Hydration Experiments

Numerical Study on the Effects of Imbibition on Gas Production and Shut-In Time Optimization in Woodford Shale Formation

An analytical model for shut-in time optimization after hydraulic fracturing in shale oil reservoirs with imbibition experiments

Mechanisms and capacity of high-pressure soaking after hydraulic fracturing in tight/shale oil reservoirs

Experimental Study on the Forcible Imbibition Law of Water in Shale Gas Reservoirs

Experimental Study on Field Actual Shut-In After Fracturing of Shale Gas Reservoir

A semi-analytical model for fractured horizontal wells production considering imbibition during shut-in periods

State of Art Fracturing Optimization Reduces Water Blockage in Unconventional Gas/Condensate Wells

Numerical Simulation Study on Optimal Shut-In Time in Jimsar Shale Oil Reservoir

Diagnostics of Secondary Fracture Properties Using Pressure Decline Data during the Post-Fracturing Soaking Process for Shale Gas Wells

Mathematical Modeling and Numerical Simulation of Water‐Rock Interaction in Shale under Fracturing‐fluid Flowback Conditions

Characterization of Hydraulically-Induced Fracture Initial Water Saturation Distribution Using Arp's Correlation

Production induced fracture closure of deep shale gas well under thermo-hydro-mechanical conditions

A Mathematical Model for Predicting Long-Term Productivity of Channel-Fractured Shale Gas/Oil Wells

Experimental Investigation on Fracture Surface Strength Softening Induced by Fracturing Fluid Imbibition and Its Impacts on Flow Conductivity in Shale Reservoirs

Life cycle integrated flow simulation for hydraulic fracturing horizontal wells in shale gas reservoirs

Productivity Model Study of Water-Bearing Tight Gas Reservoirs Considering Micro- to Nano-Scale Effects