Abstract:Experimental research of bone strength remains costly and limited for ethical and technical reasons. Therefore, to predict the mechanical state of bone tissue, as well as similar materials, it is desirable to use computer technology and mathematical modeling. Yet, bone tissue as a bio-mechanical object with a hierarchical structure is difficult to analyze for strength and rigidity; therefore, empirical models are often used, the disadvantage of which is their limited application scope. The use of new analytical solutions overcomes the limitations of empirical models and significantly improves the way engineering problems are solved. Aim of the paper: the development of analytical solutions for computer models of the mechanical state of bone and similar materials. Object of research: a model of trabecular bone tissue as a quasi-brittle material under uniaxial compression (or tension). The new ideas of the fracture mechanics, as well as the methods of mathematical modeling and the biomechanics of bone tissues were used in the work. Compression and tension are considered as asymmetric mechanical states of the material. Results: a new nonlinear function that simulates both tension and compression is justified, analytical solutions for determining the effective and apparent elastic modulus are developed, the residual resource function and the damage function are justified, and the dependences of the initial and effective stresses on strain are obtained. Using the energy criterion, it is proven that the effective stress continuously increases both before and after the extremum point on the load-displacement plot. It is noted that the destruction of bone material is more likely at the inflection point of the load-displacement curve. The model adequacy is explained by the use of the energy criterion of material degradation. The results are consistent with the experimental data available in the literature.

A Review on Recent Advances in the Constitutive Modeling of Bone Tissue

An Investigation of Two Finite Element Modeling Solutions for Biomechanical Simulation Using a Case Study of a Mandibular Bone.

Finite element material models for nonlinear analysis of cortical bone – A Systematic Review

The sensitivity of nonlinear computational models of trabecular bone to tissue level constitutive model

A Semi-Empirical Constitutive Model for Post Yield Behavior of Bone in Tension

The whole bone mechanical properties and modeling study

The impact of the parameters of the constitutive model on the distribution of strain in the femoral head

On a Constitutive Material Model to Capture Time Dependent Behavior of Cortical Bone

Computational models of bone fracture healing and applications: a review

Model Properties and Clinical Application in the Finite Element Analysis of Knee Joint: A Review

A review of the current status and future prospects of the bone remodeling process: Biological and mathematical perspectives

A Damage Model to Trabecular Bone and Similar Materials: Residual Resource, Effective Elasticity Modulus, and Effective Stress under Uniaxial Compression

Computational Modeling of Trabecular Bone Mechanics

Numerical investigation into fracture resistance of bone following adaptation

Critical evaluation of known bone material properties to realize anisotropic FE-simulation of the proximal femur

Fracture prediction for the proximal femur using finite element models: Part II--Nonlinear analysis

Cortical bone continuum damage mechanics constitutive model with stress triaxiality criterion to predict fracture initiation and pattern

820 Bone fracture pattern predictions by using constitutive model of cortical bone

Bone fracture healing within a continuum bone remodelling framework

Modeling and Evaluation to Bone Tissue Based on Cellular Model

A Semi-Empirical Elastic-Plastic-Visco-Damage Constitutive Model of Cortical Bone