Methods and Cost Estimation for the Synthesis of Nanosized Lithium Sulfide

Kai Yuan,Lixia Yuan,Jie Chen,Jingwei Xiang,Yaqi Liao,Zhen Li,Yunhui Huang

DOI: https://doi.org/10.1002/sstr.202000059

IF: 15.9

2020-12-02

Small Structures

Abstract:<p>Lithium sulfide (Li₂S) is an alternative cathode material for lithium‐sulfur batteries. It can mitigate the volume expansion problem encountered by the sulfur cathode, besides, as a fully lithium‐inserted cathode, it can be paired with lithium‐free anodes or be assembled into anode‐free batteries. However, commercially available Li₂S powder delivers poor electrochemical performances due to the significant potential barrier during the first charging process, and therefore developing inexpensive synthesis route for nanosized Li₂S with small diameter and low charging overpotential becomes the key to the construction of practical Li₂S cathode. Herein, the preparation methods for Li₂S nanoparticles are summarized, including laboratory synthesis methods and potential large‐scale preparation routes; traditional industrial synthesis methods for commercially available Li₂S are also attached as references. In particular, the scalability of these methods is mentioned, and the costs of the resulted Li₂S products are also estimated and compared to the currently used cathode materials for Li‐ion batteries. In the end, the commercially worthwhile research pathways for Li₂S synthesis as well as the perspective on the practical production of Li₂S are discussed. This review will provide useful guidance for the selection of practical Li₂S synthesis routes.</p><p>This article is protected by copyright. All rights reserved.</p>