Abstract:High-performance polymer-based aerogel fibers with ultrahigh porosity, mechanical robustness and outstanding thermal stability are demanded for applying in effective thermal insulation devices, especially in harsh environment. However, the poor mechanical properties and thermal stability of the commonly reported polymer-based aerogel fibers restricted their applications in many areas. As a special nano-build-block, aramid nanofiber-based aerogel fiber is expected to conquer this problem in virtue of the outstanding performance, intrinsically related to aramid fibers. Herein, a series of aramid nanofiber-based aerogel fibers were fabricated via a facial wet-spinning method combined with freeze–drying technique. The effects of coagulation bath temperature and the solid contents of the spinning precursors on their morphologies and mechanical properties were systematically studied. The obtained aerogel fibers possessed high porosity (> 92%), good mechanical properties (tensile strength ~ 8.1 MPa) and high specific surface area (~ 239 m2/g). Meanwhile, the woven textiles exhibited a low thermal conductivity (~ 34 mW/(m·K)) and outstanding thermal insulation properties under a wide range of temperature. In addition, surface modification by Teflon resin could make the ANAFs hydrophobic, thus exhibiting their applicational prospects in a humid environment. Overall, the aramid nanofiber-based aerogel fibers and their textile throw light in a favorable direction for developing high-performance thermal insulation fibers and textiles.Graphical AbstractAramid nanofiber-based aerogel fibers with high porosity (> 92%), good mechanical properties (tensile strength ~ 8.1 MPa) and high specific surface area (~ 239 m2/g) are fabricated by a novel and facial strategy including wet-spinning, solvent replacement and freeze–drying processes. Meanwhile, the weaved textiles exhibit a low thermal conductivity (~ 34 mW/(m·K)) and outstanding thermal insulation properties under a wide range of temperatures.

Recycling of Pineapple Leaf and Cotton Waste Fibers into Heat-insulating and Flexible Cellulose Aerogel Composites

Thermal Insulation of Flame Retardant Silica Aerogel Composites from Rice Husk Ash and Plastic Waste Fibers

Konjac glucomannan-based aerogels with excellent thermal stability and flame retardancy for thermal insulation application

Lightweight, ultrahigh-strength and flame-retardant cellulose aerogel crosslinked with a reactive P/N-rich curdlan derivative

Flame-retardant cellulose-aerogel composite from agriculture waste for building insulation

Aerogel from sustainably grown bacterial cellulose pellicle as thermally insulative film for building envelope

Cellulose Nanofibril (CNF) Based Aerogels Prepared by a Facile Process and the Investigation of Thermal Insulation Performance

Preparation and characterization of cellulose nanofiber/melamine–urea–formaldehyde composite aerogels for thermal insulation applications

Silica-Bacterial Cellulose Composite Aerogel Fibers with Excellent Mechanical Properties from Sodium Silicate Precursor

Preparation of phosphorus-nitrogen synergistic flame retardant cellulose composite aerogel from waste cotton/phytic acid/acrylamide

Robust Silica-Bacterial Cellulose Composite Aerogel Fibers for Thermal Insulation Textile

An Efficient and Economic Approach for Producing Nanocellulose-Based Aerogel from Kapok Fiber

The use of cellulose fiber from office waste paper to improve the thermal insulation-related property of konjac glucomannan/starch aerogel

Novel fabrication of coconut pith-based carbon aerogels as green adsorbents for oil and organic solvent removal

Biogenic Straw Aerogel Thermal Insulation Materials

Fabrication of cellulose–chitosan composites aerogel from agricultural wastes for food packaging

Green fabrication of bio-based aerogels from coconut fibers for wastewater treatment

Preparation of Sustainable Kapok Fiber/Chitosan Composite Aerogels with Amphiphilic and Mechanical Properties for Thermal Insulation and Packaging Applications

Efficient thermal insulation through all-biomass silk fibroin composite aerogel 3D-reinforced by natural down-fiber

Controllable Strong and Ultralight Aramid Nanofiber-Based Aerogel Fibers for Thermal Insulation Applications

Starch/clay aerogel reinforced by cellulose nanofibrils for thermal insulation