Abstract:The goal of this work is to build a unique numerical method to obtain the basic aerodynamic characteristics of the aircraft and to enable a wide application of the method in the analysis of some aerodynamic characteristics of the aircraft, without use of empirical methods. The Computational fluid dynamics (CFD) simulation method was being calibrated based on test results of the standard AGARD-B (Advisory Group for Aerospace Research and Development) test model, which were obtained in the T-38 trisonic wind tunnel facility of the Military Technical Institute (VTI) in Belgrade, Serbia.The paper presents the CFD simulation through a description of the conditions of flow, geometry of the computer domain, grid density and mesh strategy, boundary conditions, initial strategy and turbulence model. The CFD simulation was carried out for flow cases with similarity parameters M = 0.6, M = 0.85 and M = 1.6 and Re = from 7.7(x10 6 ) to 9.9(x10 6 ) . The results of calculations were compared with the appropriate experimental ones and presented in the form of comparative diagrams for the drag, lift and pitching moment coefficients. The results of investigation presented in divergence diagrams show very good agreement between numerical and experimental ones. Simulated flows are illustrated by the distribution of pressure and velocity components on the surface of the tested model and the computational domain. This CFD simulation will be applied to other similar aerodynamic designs for a wide range angles of attack and Mach numbers and can be a strong point for the development of different aerodynamic designs.The ultimate aim of the work is to use the previous calibrated CFD simulation method as the basis for future determination of the aerodynamic characteristics of aircraft in non-stationary flight modes, caused by motion of the aircraft and/or by changing the free-velocity vector.

Experimental and numerical research of the influence of thrust vector control on the missile aerodynamics by cold and hot jet simulations

Computational Study of Lateral Jet Interaction in Hypersonic Thermochemical Non-Equilibrium Flows Using Nonlinear Coupled Constitutive Relations

Design of 2-DOF Thrust vector control system for Rockets and Missiles

Computational investigation of both geometric and fluidic compressible turbulent thrust vectoring, using a Coanda based nozzle

NUMERICAL INVESTIGATION OF THE THRUST VECTORING PERFORMANCE OF A BYPASS DUAL THROAT NOZZLE

Solving Innovative Problems of Thrust Vector Control Based on Euler's Scientific Legacy

Numerical study on thrust vector control of double hot gas secondary lateral injection

Aircraft thrust vector control using variable vanes: numerical simulation and optimization

Numerical Investigation on the Thrust Vectoring Performance of Bypass Dual Throat Nozzle

Improved Design and Performance Analysis of Counterflow Thrust Vectoring Technology under High Subsonic.

Thrust Vector Control for Powered Flight of the Upper Stages

Protuberance placement mastery: Shock wave control integration with Coanda effect to thrust vectoring on a sonic jet

Calibration of the CFD code based on testing of a standard AGARD-B model for determination of aerodynamic characteristics

Sensitivity Analysis and Flight Tests Results for a Vertical Cold Launch Missile System

Aerodynamic‐thermal/structural design optimization of missile fin configuration during supersonic flight condition

MISSILE VERTICAL LAUNCH SYSTEM WITH REACTION CONTROL JETS

Evaluation of Thermal Destratification Performance and Optimization of Jetting Parameters in a Spray-Bar Thermodynamic Vent System

Direct Simulation Monte Carlo Analysis on Thrust Vectoring of a Supersonic Micro Nozzle using Bypass Mass Injection

Performance Comparison of Control Strategies for a Variable-Thrust Solid-Propellant Rocket Motor

Numerical Investigation of the Aerodynamic Characteristics of a Missile

Numerical investigation of dynamic characteristics of dual throat nozzle and bypass dual throat nozzle in thrust vectoring starting process