Abstract:In the southern China , the sugarcane is mostly planted on the slopes and hilly areas . Because of the influence caused by the typhoons and monsoons , the sugarcane always render in the state of lodging and bending . Lifting up the sugarcane is the first step of the mechanized harvesting of sugarcane . It is demanded that the harvest mechanic of sugarcane should be adapt to the planting patterns and growth condition , in order to lift up the sugarcane in different lodging status . Currently , the design and the research method on sugarcane lifter was traditional , which usually did static analysis only and did not take the dynamic characteristics into consideration . The propped effect of the existing mechanism is poor and the efficiency is not really high , meanwhile , the sugarcane lifter has problems caused by the unreasonable structure design and operation parameters . In order to solve these problems , the virtual prototype technology will be used to do the virtual experiment on sugarcane lifter .At the same time , the technology will also analyze its key technology , save the cost of physical prototype research and development , and shorten the development cycle of the physical prototype as well . The investigated subject of this paper was mainly the sugarcane lifter with the 60° installation angle and the equivalent pitch spiral . Aimed at the problems of the sugarcane lifting caused by the unreasonable structure design and the operation parameters , the three-dimensional model would be imported into the ADAMS software to do the dynamic simulation . The method of three levels and three factors comprehensive test was used , whose impact factors were sugarcane lifter speed , pitch and the forward speed . Regarding the lifting height as the evaluation index , it intended to find the optimum combination for the virtual experiment of the sugarcane lifter structure and the working parameters , meanwhile , the test data variance would be analyzed by the MATLAB software . Through the analysis of the dynamic simulation of the sugarcane lifter , it was clear that when the time was 0 to 1.5 s , the sugarcane lifter would not get in touch with the sugarcane , and as a result , the centroid vertical displacement was not changed accordingly ;but when the time was 1.5 to 4.5 s , the sugarcane would be lifted by the sugarcane lifter , and the centroid vertical displacement was correspondingly increased gradually . When the time was more than 4.5 s , the fluctuations of the centroid vertical displacement would come out because of the non-existence of the simulation of cutting part.In the combination of the ADAMS virtual comprehensive test , the best operating and structure parameters for the angle of 60° installation sugarcane lifter was that :when the speed of the sugarcane lifter was up to 120 r/min , the pitch of thread was 360 mm , and the forward speed was 350 mm/s , the lifting height of the 60° side lodging sugarcane would reach the maximum 186.9 mm . In addition , the three factors have mutual interactions with each other , and this moment was the strongest time that the forward speed affected the height of the sugarcane lifter , all of which will eventually provide the theory basis for the improvement of sugarcane lifter .

Economic Efficiency of Mechanized Harvesting of Sugarcane at Different Operating Speeds

Operational performance of sugarcane harvests with and without the use autopilot

Economic, environmental, and social impacts of different sugarcane production systems

Advancements of agriculture 4.0 in mechanized sugarcane harvesting: a review

Optimisation and Finite Element Simulation of the Chopping Process for Chopper Sugarcane Harvesting

Performance Evaluation of a Chopper System for Sugarcane Harvester

Engineering and Economic Evaluation of a Prototype Fabricated for Harvesting Sugarcane

Mechanized harvesting of conilon coffee plants using a self-propelled machine

EVALUATION OF COSTS OF HARVESTER IN CUT AND PROCESSING OF EUCALYPTUS WOOD1

Fuel Consumption Between Two Soil Tillage Systems for Planting Sugarcane

Technical, Economic, and Environmental Parameters of Excavator-Based Harvester in Function of Engine Speed and Hydraulic Pump Flow

Optimisation and dynamic simulation of a conveying and top breaking system for whole-stalk sugarcane harvesters

Optimization of a Whole-Stalk Operating System after Sugarcane Base Cutting

Optimization of parameters for sugarcane lifter based on simulation of virtual prototype

Soil tillage and sugarcane planting: an assessment of cost and economic viability

Soil compaction on traffic lane due to soil tillage and sugarcane mechanical harvesting operations

Experimental model for optimizing mechanized mountain coffee harvesting

Untrafficked furrowed seedbed sustains soil physical quality in sugarcane mechanized fields

Depth, coverage and spacing of the furrows in mechanized sugarcane plantation with planter and distributor in the day and night shifts

Performance of DSSAT CSM-CANEGRO Under Operational Conditions and its Use in Determining the ‘Saving Irrigation’ Impact on Sugarcane Crop

The times, movements and operational efficiency of mechanized coffee harvesting in sloped areas