Abstract:Solid electrolytes have gained attention recently for the development of next-generation Li-ion batteries since they can fundamentally improve the battery stability and safety. Among various types of solid electrolytes, composite solid electrolytes (CSEs) exhibit both high ionic conductivity and excellent interfacial contact with the electrodes. Incorporating active nanofibers into the polymer matrix demonstrates an effective method to fabricate CSEs. However, current CSEs based on traditional poly(ethylene oxide) (PEO) polymer suffer from the poor ionic conductivity of PEO and agglomeration effect of inorganic fillers at high concentrations, which limit further improvements in Li+ conductivity and electrochemical stability. Herein, we synthesize a novel PEO based cross-linked polymer (CLP) as the polymer matrix with naturally amorphous structure and high room-temperature ionic conductivity of 2.40 × 10−4 S cm−1. Li0.3La0.557TiO3 (LLTO) nanofibers are incorporated into the CLP matrix to form composite solid electrolytes, achieving enhanced ionic conductivity without showing filler agglomeration. The high content of Li-conductive nanofibers improves the mechanical strength, ensures the conductive network, and increases the total Li+ conductivity to 3.31 × 10−4 S cm−1. The all-solid-state Li|LiFePO4 batteries with LLTO nanofiber-incorporated CSEs are able to deliver attractive specific capacity of 147 mAh g−1 at room temperature, and no evident dendrite is found at the anode/electrolyte interface after 100 cycles.Graphic AbstractA highly ionic-conductive 3-D fiber network composite solid electrolyte is introduced based on Li-ion conducting nanofibers and amorphous poly(ethylene oxide) (PEO) cross-linked polymer. With the reinforcement of Li0.3La0.557TiO3 (LLTO) nanofibers, the continuous 3D conduction network formed within the polymer matrix greatly enhances the electrochemical and mechanical properties of resultant composite solid electrolytes. Consequently, the lithium dendrite is effectively controlled after long cycles, and the all-solid-state Li|LiFePO4 prototype cells demonstrate excellent cycling stability at room temperature.

A flexible three-dimensional composite nanofiber enhanced quasi-solid electrolyte for high-performance lithium metal batteries

Fluorinated boron nitride nanosheet enhanced ultrathin and conductive polymer electrolyte for high‐rate solid‐state lithium metal batteries

Flexible ion-conducting membranes with 3D continuous nanohybrid networks for high-performance solid-state metallic lithium batteries

A ternary composite nanofiber-derived thin membrane electrolyte for solid-state Li metal batteries

Quasi-solid polymer electrolytes with fast interfacial transport for lithium metal batteries

3D poly(vinylidene fluoride–hexafluoropropylen) nanofiber-reinforced PEO-based composite polymer electrolyte for high-voltage lithium metal batteries

PVDF‐HFP Based, Quasi‐Solid Nanocomposite Electrolytes for Lithium Metal Batteries

3D nanofiber framework based on polyacrylonitrile and siloxane-modified Li6.4La3Zr1.4Ta0.6O12 reinforced poly (ethylene oxide)-based composite solid electrolyte for lithium batteries

Polyvinylidene fluoride nanofibers with embedded Li6.4La3Zr1.4Ta0.6O12 fillers modified polymer electrolytes for high-capacity and long-life all-solid-state lithium metal batteries

Flexible Composite Electrolyte Membranes with Fast Ion Transport Channels for Solid-State Lithium Batteries

A flexible solid polymer electrolyte enabled with lithiated zeolite for high performance lithium battery

A Janus-faced, perovskite nanofiber framework reinforced composite electrolyte for high-voltage solid lithium-metal batteries

High-Performance 3-D Fiber Network Composite Electrolyte Enabled with Li-Ion Conducting Nanofibers and Amorphous PEO-Based Cross-Linked Polymer for Ambient All-Solid-State Lithium-Metal Batteries

Li0.35La0.55TiO3 Nanofibers Enhanced Poly(vinylidene Fluoride)-Based Composite Polymer Electrolytes for All-Solid-State Batteries.

Rational design of ultrathin composite solid-state electrolyte for high-performance lithium metal batteries

Solid-State Lithium Lanthanum Titanate-Polymer Composite Electrolyte for Lithium Ion Batteries

Preparation and Conductivity Analysis of LLTO Nanofiber‐Incorporated PEO‐PVDF‐HFP‐LiClO4 Solid Polymer Electrolytes for High‐Voltage Lithium Metal Batteries

A Three-Dimensional Electrospun Li6.4La3Zr1.4Ta0.6O12–Poly (Vinylidene Fluoride-Hexafluoropropylene) Gel Polymer Electrolyte for Rechargeable Solid-State Lithium Ion Batteries

A Heterogeneous Quasi-solid-State Hybrid Electrolyte Constructed from Electrospun Nanofibers Enables Robust Electrode/Electrolyte Interfaces for Stable Lithium Metal Batteries

Electrospun gel composite electrolyte of solvent-free SiO 2 nanofluids coupled polyacrylonitrile nanofibers for high-rate lithium-metal batteries

Enhanced ionic conductivity and cycle performance by ZIF-8 nanoparticles into PVDF-HFP electrolyte for Li-ions batteries