Abstract:In the context of carbon reduction and emission reduction, the new process of electric arc furnace (EAF) steelmaking based on direct hydrogen reduction is an important potential method for the green and sustainable development of the steel industry. Within an electric furnace for the hydrogen-based direct reduction of iron, after hydrogen-based directly reduced iron (HDRI) is produced through a shaft furnace, HDRI is melted or smelted in an EAF to form final products such as high-purity iron or high-end special steel. As smelting proceeds in the electric furnace, it is easy for pieces of HDRI to bond to each other and become larger pieces; they may even form an "iceberg", and this phenomenon may then worsen the smelting working conditions. Therefore, the melting of HDRI is the key to affecting the smelting cycle and energy consumption of EAFs. In this study, based on the basic characteristics of HDRI, we established an HDRI melting model using COMSOL Multiphysics 6.0 and studied the HDRI melting process, utilizing pellets with a radius of 8 mm. The results of our simulation show that the HDRI melting process can be divided into three different stages: generating a solidified steel layer, melting the solidified steel layer, and melting HDRI bodies. Moreover, multiple HDRI processes are prone to bonding in the melting process. Increasing the spacing between pieces of HDRI and increasing the preheating temperature used on the HDRI can effectively reduce the aforementioned bonding phenomenon. When the melting pool temperature is 1873 K, increasing the spacing of HDRI to 10 mm and increasing the initial HDRI temperature to 973 K was shown to effectively reduce or eliminate the bonding phenomenon among pieces of HDRI. In addition, with the increase in the melting pool temperature, the time required for melting within the three stages of the HDRI melting process shortened, and the melting speed was accelerated. With the increase in the temperature used to preheat the HDRI, the duration of the solidified steel layer's existence was also shortened, but this had no significant impact on the time required for the complete melting of HDRI. This study provides a theoretical basis for the optimization of the HDRI process within EAFs.

Study on dehydrogenation behaviour of molten steel in single snorkel refining furnace (SSRF) by a mathematical model

Numerical Simulation of Dehydrogenation Annealing in Bloom

A mathematical model for dehydrogenation of molten steel in the Vacuum degasser

Numerical Simulation on Dehydrogenation Behavior during Argon Blowing Enhanced Vacuum Refining Process of High-quality Steel

A Numerical Study on Dehydrogenation of Liquid Steel Supersaturated With Hydrogen in a Vacuum Degasser (VD)

Hydrogen Sulfide Removal Process Embedded Optimization of Hydrogen Network

Modeling on the Desulfurization of the Molten Steel During RH Process

Modeling of the secondary refining process of steel

Mathematical Simulation of Decarburization with CO2 Injection During RH Refining of Ultra-Low-Carbon Steel

A coupled mathematical model and experimental validation of oxygen transport behavior in the electro-slag refining process

Numerical Modeling of Microchannel Reactor with Porous Surface Microstructure Based on Fractal Geometry

Decarburization Mechanism of Rh-Mfb Refining Process

Physical Simulation Study on Flow Field Characteristics of Molten Steel in 70t Ladle Bottom Argon Blowing Process

Water model study on the mixing behaviour of gas-liquid two-phase flow for the SKS lead reduction process in a bottom-blown furnace

A Numerical Study of the Thermochemical and Aerodynamic States of H2‐intensive Direct Reduction Shaft Furnace

Multiphysics Numerical Simulation Model and Hydraulic Model Experiments in the Argon-Stirred Ladle

Mathematical Modeling for the Process of Smelting Reduction Ironmaking Integrated with Hydrogen-Rich Coal Gasification

Droplet-Resolved Modeling on Dispersion Kinetics of Desulfurization Flux in a Mechanically Agitated Ladle for Hot Metal Treatment

Numerical Simulation of the Hydrogen-Based Directly Reduced Iron Melting Process

Collision-coalescence among inclusions with bubble attachment and transport in molten steel of RH

Bubble formation by argon injection through the down-leg snorkel with Ruhrstahl–Heraeus (RH) circulating flow