Abstract:In the current vehicle-bridge dynamics research studies, displacement impact coefficients are often used to replace the moment and shear force impact coefficients, and the vehicle model is also simplified as a moving-load model without considering the contribution of vehicle stiffness and damping to the system in some concerned research studies, which cannot really reflect the mechanical behavior of the structures under vehicle dynamic loads. This paper presents a vehicle-bridge coupling model for the prediction of dynamic responses and impact coefficient of the long-span curved bending beam bridge. The element stiffness matrix and mass matrix of a curved box girder bridge with 9 freedom degrees are directly deduced based on the principle of virtual work and dynamic finite element theory. The vibration equations of vehicle-bridge coupling are established by introducing vehicle mode with 7 freedom degrees. The Newmark-β method is adopted to solve vibration response of the system under vehicle dynamic loads, and the influences of flatness of bridge surface, vehicle speed, load weight, and primary beam stiffness on the impact coefficient are comprehensively discussed. The results indicate that the impact coefficient presents a nonlinear increment as the flatness of bridge surface changes from good to terrible. The vehicle-bridge coupling system resonates when the vehicle speeds reach 60 km/h and 100 km/h. The moment design value will maximally increase by 2.89%, and the shear force design value will maximally decrease by 34.9% when replacing moment and shear force impact coefficients with the displacement impact coefficient for the section internal force design. The load weight has a little influence on the impact coefficient; the displacement and moment impact coefficients are decreased with an increase in primary beam stiffness, while the shear force impact coefficient is increased with an increase in primary beam stiffness. The theoretical results presented in this paper agree well with the ANSYS results.

A New Vehicle-Bridge Coupling Analysis Method Based on Model Polycondensation

Experimental Study and Numerical Analysis of A Composite Bridge Structure

FEM analysis of vehicle-bridge vibration considering bridge deck's vibration

Research on computational method and dynamic characteristics of traffic vibration of steel bridge

General Reduced Vehicle Model for Simulating Truck-Bridge Pier Collisions

Reduced Models for Simulating Collisions Between Trucks and Bridge Piers

Nonlinear Dynamic Analysis of Multi-vehicle Vehicle-bridge Coupling System

An interactive method for the analysis of the simulation of vehicle–bridge coupling vibration using ANSYS and SIMPACK

Dynamic research on higih-pier & long-span continuous rigid frame bridge from overload vehicle

Influence of bridge parameters on monorail vehicle–bridge system— A research with multi-rigid body and multi-flexible body coupling theory and Park method

Simulation analysis and control research of long multi-span composite bridge with incremental launching construction

Simulating analysis of cantilever casting of prestressed concrete bridge

Rigid–flexible coupled dynamic response of steel–concrete bridges on expressways considering vehicle–road–bridge interaction

Simulation of train–bridge interaction under wind loads: a rigid-flexible coupling approach

Numerical modeling and dynamic analysis of a floating bridge subjected to wave, current and moving loads

Impact Coefficient Analysis of Curved Box Girder Bridge Based on Vehicle-Bridge Coupling

A dynamic analysis scheme for the suspended monorail vehicle–curved bridge coupling system

Deformation and internal force of multitower suspension bridges: Numerical modeling and analytical analysis

Dynamic analysis of train and bridge in crosswinds based on a coupled wind-train-track-bridge model

An efficient modeling methodology of monorail train and large-scale bridge interaction based on moving element technology

Numerical analysis of vehicle-bridge coupling vibration concerning nonlinear stress-dependent damping