Abstract:Purpose Fused filament fabrication (FFF) technique using metal filled filaments in combination with debinding and sintering steps can be a cost-effective alternative for laser-based powder bed fusion processes. The mechanical behaviour of FFF-metal materials is highly dependent on the processing parameters, filament quality and adjusted post-processing steps. In addition, the microstructural material properties and geometric characteristics are inherent to the manufacturing process. The purpose of this study is to characterize the mechanical and geometric performance of three-dimensional (3-D) printed FFF 316 L metal components manufactured by a low-cost desktop 3-D printer. The debinding and sintering processes are carried out using the BASF catalytic debinding process in combination with the BASF 316LX Ultrafuse filament. Special attention is paid on the effects of build orientation and printing strategy of the FFF-based technology on the tensile and geometric performance of the 3-D printed 316 L metal specimens. Design/methodology/approach This study uses a toolset of experimental analysis techniques [metallography and scanning electron microcope (SEM)] to characterize the effect of microstructure and defects on the material properties under tensile testing. Shrinkage and the resulting porosity of the 3-D printed 316 L stainless steel sintered samples are also analysed. The deformation behaviour is investigated for three different build orientations. The tensile test curves are further correlated with the damage surface using SEM images and metallographic sections to present grain deformation during the loading progress. Mechanical properties are directly compared to other works in the field and similar additive manufacturing (AM) and Metal Injection Moulding (MIM) manufacturing alternatives from the literature. Findings It has been shown that the effect of build orientation was of particular significance on the mechanical and geometric performance of FFF-metal 3-D printed samples. In particular, Flat and On-edge samples showed an average increase in tensile performance of 21.7% for the tensile strength, 65.1% for the tensile stiffness and 118.3% for maximum elongation at fracture compared to the Upright samples. Furthermore, it has been able to manufacture near-dense 316 L austenitic stainless steel components using FFF. These properties are comparable to those obtained by other metal conventional processes such as MIM process. Originality/value 316L austenitic stainless steel components using FFF technology with a porosity lower than 2% were successfully manufactured. The presented study provides more information regarding the dependence of the mechanical, microstructural and geometric properties of FFF 316 L components on the build orientation and printing strategy.

A brief review of main ideas of metal fused filament fabrication

Three-Dimensional Printing of Metallic Parts by Means of Fused Filament Fabrication (FFF)

Metal FDM, a new extrusion-based additive manufacturing technology for manufacturing of metallic parts: a review

Additive manufacturing of 316L stainless-steel structures using fused filament fabrication technology: mechanical and geometric properties

3D printing of metal parts using a highly-filled thermoplastic filament

Processing of Highly Filled Polymer–Metal Feedstocks for Fused Filament Fabrication and the Production of Metallic Implants

Prototyping and characterisation of 316L stainless steel parts and lattice structures printed via metal fused filament fabrication

A Review on Fabrication and Printing of Carbon Fiber-Reinforced Composite Filaments using FDM Process

Multi-Metal Additive Manufacturing by Extrusion-Based 3D Printing for Structural Applications: A Review

Fused Filament Fabrication Process: A Review of Numerical Simulation Techniques

Advanced Composite Materials Utilized in FDM/FFF 3D Printing Manufacturing Processes: The Case of Filled Filaments

A Review Study on Mechanical Properties of Obtained Products by FDM Method and Metal/Polymer Composite Filament Production

Effect of particle size on the properties of highly-filled polymers for fused filament fabrication

A brief review on the manufacturing of metal components using selective laser melting

Application of Numerical Modeling and Finite Element Analysis in Fused Filament Fabrication: A Review

Nanomaterials Reinforced Polymer Filament for Fused Deposition Modeling: A State-of-the-Art Review

Metallurgy and Solidification Microstructure Control of Fusion-Based Additive Manufacturing Fabricated Metallic Alloys: A Review

3D Printing Technologies for Fabrication of Magnetic Materials Based on Metal–Polymer Composites: A Review

A review on powder bed fusion technology of metal additive manufacturing

Sustainable metal-infused polymer feedstock compatible with low-cost metal sinter-based 3D printing

Failures and Flaws in Fused Deposition Modeling (FDM) Additively Manufactured Polymers and Composites