Photon-engineered radiative cooling textiles

Po-Chun Hsu,Xiuqiang Li

DOI: https://doi.org/10.1126/science.abe4476

IF: 56.9

2020-11-13

Science

Abstract:Personal thermal management offers a path to reduce climate control energy use

multidisciplinary sciences

What problem does this paper attempt to address?

Designing Textile Architectures for High Energy-Efficiency Human Body Sweat- and Cooling-Management

Kun Fu,Zhi Yang,Yong Pei,Yongxin Wang,Beibei Xu,YuHuang Wang,Bao Yang,Liangbing Hu

DOI: https://doi.org/10.1007/s42765-019-0003-y

IF: 12.958

2019-01-01

Advanced Fiber Materials

Abstract:Thermal management of textiles requires local microclimate control over heat and wet dissipation to create a comfortable thermal-wet environment at the interface of the human body and clothing. Herein, we design a fabric capable of both sweat- and cooling-management using a knitted fabric featuring a bilayer structure consisting of hydrophobic polyethylene terephthalate and hydrophilic cellulose fibers to simultaneously achieve high infrared (IR) transmittance and good thermal-wet comfort. The IR transmission of this cooling textile increased by ~ twofold in the dry state and ~ eightfold in the wet state compared to conventional cotton fabric. When the porosity changes from 10 to 47% with the comparison of conventional cotton fabric and our cooling textile, the heat flux is increased from 74.4 to 152.3 W/cm2. The cooling effect of the cooling fabric is 105% greater than that of commercial cotton fabric, which displays a better thermal management capacity for personal cooling. This bilayer design controls fast moisture transfer from inside out and provides thermal management, demonstrating high impact not only for garments, but also for other systems requiring heat regulation, such as buildings, which could mitigate energy demand and ultimately contribute to the relief of global energy and climate issues.
Recent Advancements in Radiative Cooling Textiles for Personal Thermal Management

Shan Jiang,Kui Zhang,Cai‐Feng Wang,Qing Li,Liangliang Zhu,Chunxia Su

DOI: https://doi.org/10.1039/d4ta01734j

IF: 11.9

2024-01-01

Journal of Materials Chemistry A

Abstract:To meet the increasing need for outdoor personal thermal management (PTM) since the intensified global warming, radiative cooling (RC) textiles with tunable solar reflectivity and mid-infrared emissivity/transmissivity attributes can dynamically...
Radiative cooling textiles using industry-standard particle-free nonporous micro-structured fibers

Peter B. Catrysse,Shanhui Fan

DOI: https://doi.org/10.1515/nanoph-2023-0650

IF: 7.5

2024-01-11

Nanophotonics

Abstract:Thermal radiation is a major dissipative pathway for heat generated by the human body and offers a significant thermoregulation mechanism over a wide range of conditions. We could use this in garment design to enhance personal cooling, which can improve the wearing comfort of garments or even result in energy savings in buildings. At present, however, radiative cooling has received insufficient attention in commercial design and production of textiles for wearable garments. Textiles that efficiently transmit the radiative heat were recently demonstrated, but either do not utilize standard weaving and knitting processes for wearable garments or require substantial process modifications. Here, we demonstrate the design and implementation of large-scale radiative cooling textiles for localized cooling management and enhanced thermal comfort using industry-standard particle-free nonporous micro-structured fibers that are fully compatible with standard textile materials and production methods. The micro-structured fibers, yarns and fabrics are part of a hierarchical photonic structure design that renders the textiles highly infrared transparent (up to > 0.8) while assuring visual opacity (up to 0.99). We design radiative cooling textiles with first-principles electromagnetic methods and fabricate them using commercial textile materials and formation facilities. Our "fabless" approach is confirmed by very good quantitative agreement between design and measurements. The resulting fabrics exhibit wearability properties expected of wearable textiles, and lower skin temperature by ≥ 3 °C compared to conventional textiles, which offers the potential for > 30 % energy savings in buildings and increases wearing comfort by significantly reducing the reliance on latent heat dissipation for thermoregulation.

optics,physics, applied,materials science, multidisciplinary,nanoscience & nanotechnology
An Ultra-Thin Colored Textile with Simultaneous Solar and Passive Heating Abilities

Hao Luo,Qiang Li,Kaikai Du,Ziquan Xu,Huanzheng Zhu,Dongli Liu,Lu Cai,Pintu Ghosh,Min Qiu

DOI: https://doi.org/10.1016/j.nanoen.2019.103998

IF: 17.6

2019-01-01

Nano Energy

Abstract:Personal thermal management, especially heating up the space around human body, consumes substantial global resources. While traditional methods (such as room heaters) for personal heating are mostly energy-wasting and eco-unfriendly, ultra-thin textile with localized heating ability has recently gained significant attention. To date, passive radiative heating textiles are designed exclusively for indoor scenario and the coloration remains challenging. Herein, the authors report a colored nanophotonic structure textile (similar to 16 mu m thickness) with localized heating ability for both indoor and outdoor environments: (a) solar heating by selectively absorbing sunlight and converting it into heat (maximum absorbance similar to 50%) and (b) passive heating by suppressing radiative heat loss with a low-emissivity outer surface (infrared emissivity similar to 10%). This textile enables a 3.8 degrees C temperature enhancement of the artificial skin in indoor environment and a 6.3 degrees C temperature enhancement under sunlight compared with 2-mm-thick black sweatshirt, as well as excellent aesthetics, wearability and manufacturability. This colored textile with simultaneous solar and passive heating abilities is effective for energy-saving personal thermal management, and paves an innovative way to the sustainable development.
Colored Woven Cloth-Based Textile for Passive Radiative Heating

Yining Zhu,Wenjuan Wang,Yiwei Zhou,Rui Qin,Bing Qin,Tianze Zhou,Min Qiu,Qiang Li

DOI: https://doi.org/10.1002/lpor.202300293

2023-01-01

LASER & PHOTONICS REVIEWS

Abstract:Personal thermal management is attracting growing attention due to the aggravation of climate anomalies and the increasing emphasis on physical health. Passive radiative heating textiles offer a promising solution to improve thermal comfort without energy consumption; however, using woven cloth to achieve passive heating while still exhibiting an aesthetic appearance remains a problem. Here, a colored textile based on woven cloth that features superior passive radiative heating capability without sacrificing aesthetics is demonstrated. By coating infrared transparent inorganic nanoparticles on MXene-decorated cotton, the textile achieves selectively visible reflectance for desired color, high near-infrared absorptivity, and low mid-infrared emissivity for passive heating management, as well as uniformly distributed nanopores for wearability. Thermal tests on simulated skin and real human bodies show considerable temperature increases compared to pure cottons. Owing to its easy manufacturing process and remarkable spectral engineering capability, this textile can be further applied to energy conservation and multi-spectral camouflage.
Radiative human body cooling by nanoporous polyethylene textile

Po-Chun Hsu,Alex Y Song,Peter B Catrysse,Chong Liu,Yucan Peng,Jin Xie,Shanhui Fan,Yi Cui,Alex Y. Song,Peter B. Catrysse

DOI: https://doi.org/10.1126/science.aaf5471

IF: 56.9

2016-09-02

Science

Abstract:Thermal management through personal heating and cooling is a strategy by which to expand indoor temperature setpoint range for large energy saving. We show that nanoporous polyethylene (nanoPE) is transparent to mid-infrared human body radiation but opaque to visible light because of the pore size distribution (50 to 1000 nanometers). We processed the material to develop a textile that promotes effective radiative cooling while still having sufficient air permeability, water-wicking rate, and mechanical strength for wearability. We developed a device to simulate skin temperature that shows temperatures 2.7° and 2.0°C lower when covered with nanoPE cloth and with processed nanoPE cloth, respectively, than when covered with cotton. Our processed nanoPE is an effective and scalable textile for personal thermal management.

multidisciplinary sciences
Personal Radiative Cooling Textile Generation

Du Xiran,Wang Xueyang,Zhu Bin

DOI: https://doi.org/10.3788/LOP231396

2023-01-01

Laser & Optoelectronics Progress

Abstract:In a hot environment, personal cooling is important to maintain thermal comfort. In recent years, radiative cooling textiles can enhance the heat dissipation of the human body through the design of the infrared optical properties without consuming energy, which provides a new opportunity for realizing personal cooling in indoor and outdoor environments. Unlike the indoor controllable thermal environment, the outdoor thermal environment is characterized by strong solar irradiance intensity. Therefore, it is necessary to prevent the input of solar heat while enhancing human body heat dissipation. Based on the difference between indoor and outdoor thermal environments, we introduce the design strategy of radiative cooling textiles from the perspective of indoor and outdoor application scenarios, summarize the recent progress of radiative cooling textiles, and prospect the future development.
An all-weather radiative human body cooling textile

Xueke Wu,Jinlei Li,Qinyuan Jiang,Wenshuo Zhang,Baoshun Wang,Run Li,Siming Zhao,Fei Wang,Ya Huang,Pei Lyu,Yanlong Zhao,Jia Zhu,Rufan Zhang

DOI: https://doi.org/10.1038/s41893-023-01200-x

IF: 27.6

2023-08-15

Nature Sustainability

Abstract:Nature Sustainability, Published online: 14 August 2023; doi:10.1038/s41893-023-01200-x Radiative cooling textiles provide a sustainable means for personal thermal management. Here the nano-textile design realizes an unprecedented combination of human body cooling in both indoor and outdoor conditions without compromising wearability.

environmental sciences,environmental studies,green & sustainable science & technology
Temperature-adaptive dual-modal photonic textiles for thermal management

Kaixuan Zhu,Houze Yao,JiaJia Song,Qihua Liao,Shuang He,Tianlei Guang,Haiyan Wang,Xuanzhang Hao,Bing Lu,Tengyu Lin,Huhu Cheng,Xin Liu,Liangti Qu

DOI: https://doi.org/10.1126/sciadv.adr2062

IF: 13.6

2024-10-10

Science Advances

Abstract:Maintaining a thermally comfortable living and working environment with renewable energy sources is crucial for human health. However, achieving temperature self-regulation in individual textiles without external interventions remains a challenge. Here, we present a dual-modal photonic textile capable of autonomously achieving both low-temperature solar heating and high-temperature radiative cooling under sunlight. This innovative textile is primarily composed of textile fibers that are functionalized with thermochromic microcapsules encapsulated in graphene and barium sulfate coatings, which exhibit approximately 80% visible light optical modulation when integrated into the fabric. We demonstrate that garment and tent (3.5 m × 2.9 m × 1.3 m) fabricated from these textiles can achieve temperature-adaptive, all-weather thermal management, expanding the thermal comfort range by 8.5°C. This research showcases notable potential for applications in fabric-related heat management and highlights the importance of exploring temperature-adaptive solutions for a sustainable and healthy lifestyle.

multidisciplinary sciences
Spectrally engineered textiles for personal cooling

Junwei Liu,Yahui Du,Shuqi Zhang,Jinyue Yan

DOI: https://doi.org/10.1016/j.joule.2024.08.012

IF: 46.048

2024-10-16

Joule

Abstract:Radiative cooling textiles have emerged as a promising solution to improve personal comfort in countering continuous heatwaves and extreme weather. Through radiative spectrum engineering, global efforts have progressively tackled the challenges of multi-environment applications of cooling textiles. In this Commentary, we clarify the design principle and performance of various cooling textiles for human comfort and highlight the application potential of infrared-transparent textiles for air conditioning energy saving. Moving forward, the remaining challenges and future research directions are delivered for further breakthroughs.

materials science, multidisciplinary,chemistry, physical,energy & fuels
Bioinspired Fireproof Textiles with Hierarchical Micropore for Radiative Cooling and Perspiration

Liangyuan Qi,Wei Cai,Tianyang Cui,Bichen Lin,Zefan Feng,Jing Gao,Guangyong Jiang,Wenyue Guo,Chuanshen Wang,Bin Fei,Jixin Zhu,Yuan Hu,Weiyi Xing,Lei Song

DOI: https://doi.org/10.1016/j.cej.2024.154834

IF: 15.1

2024-01-01

Chemical Engineering Journal

Abstract:Even though the huge potential in significantly decreasing the energy consumption for cooling buildings and the human body is presented by radiative cooling technology, there is still a long way to realize its real-commercial application, considering comprehensive performances, such as safety, comfort, longevity, and production cost. Inspired by the biological micro-nano structures of Cyphochilus, we develop a one-step, large-scale, and low commercial-cost method to prepare multifunctional composite textiles, with effective cooling, fire safety, and directional water transportation. The high emissivity (96.8 %) in the atmospheric window and high reflectivity (97.1 %) in the solar waveband are successfully achieved. When exposed to direct sunlight, composite textiles can achieve up to 5 degrees C below commercial textiles at a solar intensity of 750 W center dot m(-2). Besides, the directional water transportation and the excellent mechanical strength further improve the practical application. This work proposes a radiatively cooled composite textile to achieve personal thermal management and fire protection to meet the needs of specialty garments such as firefighting suits.
Photonics Empowered Passive Radiative Cooling

Yinan Zhang,Xi Chen,Boyuan Cai,Haitao Luan,Qiming Zhang,Min Gu

DOI: https://doi.org/10.1002/adpr.202000106

2021-02-22

Advanced Photonics Research

Abstract:Passive radiative cooling has recently received renewed interest because of its unprecedented capabilities in cooling terrestrial objects below ambient air temperature without external energy consumption and greenhouse gas emission. This technology has demonstrated promising as replacements/complements of conventional compressed air based active cooling systems, which could significantly impact the global energy landscape by providing a green and efficient cooling way. The key to this success is judiciously designed photonic micro/nano structures, which simultaneously reflect solar irradiation and emit thermal infrared emission across the atmospheric transparency window 8‐13 μm. In this short review, we first give an introduction of the fundamental principles of passive radiative cooling, discussing the critical factors associated with the net cooling power of radiative cooling. Followed this, the recently emerged photonic materials and structures (e. g. multilayer thin films, micro/nano particles, photonic crystals, metamaterials, metasurfaces et al) that facilitate radiative cooling are reviewed and fruitfully analyzed and discussed. Then, we discuss some possible scale‐up manufacturing ways towards practical deployment of this energy‐efficient technology in real‐world applications. The potential applications are also summarized and envisioned. In the last section, perspectives on future development in conjunction with artificial intelligence design of photonic structures and materials are presented and discussed.This article is protected by copyright. All rights reserved.
Outdoor Personal Thermal Management with Simultaneous Electricity Generation

Hao Luo,Yining Zhu,Ziquan Xu,Yu Hong,Pintu Ghosh,Sandeep Kaur,Mingbang Wu,Chenying Yang,Min Qiu,Qiang Li

DOI: https://doi.org/10.1021/acs.nanolett.1c00400

IF: 10.8

2021-01-01

Nano Letters

Abstract:Outdoor personal thermal comfort is of substantial significance to ameliorate the health conditions of pedestrian and outdoor laborer. However, the uncontrollable sunlight, substantial radiative loss, and intense temperature fluctuations in the outdoor environment present majestic challenges to outdoor personal thermal management. Here, we report an eco-friendly passive nanostructured textile which harvests energy from the sun and the outer space for optional localized heating and cooling. Compared to conventional heating/cooling textiles like black/white cotton, its heating/cooling mode enables a skin simulator temperature increase/decrease of 8.1 °C/6 °C, respectively, under sunlight exposure. Meanwhile, the temperature gradient created between the textile and human skin allows a continuous electricity generation with thermoelectric modules. Owing to the exceptional outdoor thermoregulation ability, this Janus textile is promising to help maintain a comfortable microclimate for individuals in outdoor environment and provide a platform for pervasive power generation.
Spectrally engineered textile for radiative cooling against urban heat islands

Ronghui Wu,Chenxi Sui,Ting-Hsuan Chen,Zirui Zhou,Qizhang Li,Gangbin Yan,Yu Han,Jiawei Liang,Pei-Jan Hung,Edward Luo,Dmitri V. Talapin,Po-Chun Hsu

DOI: https://doi.org/10.1126/science.adl0653

IF: 56.9

2024-06-14

Science

Abstract:Radiative cooling textiles hold promise for achieving personal thermal comfort under increasing global temperature. However, urban areas have heat island effects that largely diminish the effectiveness of cooling textiles as wearable fabrics because they absorb emitted radiation from the ground and nearby buildings. We developed a mid-infrared spectrally selective hierarchical fabric (SSHF) with emissivity greatly dominant in the atmospheric transmission window through molecular design, minimizing the net heat gain from the surroundings. The SSHF features a high solar spectrum reflectivity of 0.97 owing to strong Mie scattering from the nano-micro hybrid fibrous structure. The SSHF is 2.3°C cooler than a solar-reflecting broadband emitter when placed vertically in simulated outdoor urban scenarios during the day and also has excellent wearable properties.

multidisciplinary sciences
Personal Thermal Management by Radiative Cooling and Heating

Shidong Xue,Guanghan Huang,Qing Chen,Xungai Wang,Jintu Fan,Dahua Shou

DOI: https://doi.org/10.1007/s40820-024-01360-1

IF: 26.6

2024-01-01

Nano-Micro Letters

Abstract:Maintaining thermal comfort within the human body is crucial for optimal health and overall well-being. By merely broadening the set-point of indoor temperatures, we could significantly slash energy usage in building heating, ventilation, and air-conditioning systems. In recent years, there has been a surge in advancements in personal thermal management (PTM), aiming to regulate heat and moisture transfer within our immediate surroundings, clothing, and skin. The advent of PTM is driven by the rapid development in nano/micro-materials and energy science and engineering. An emerging research area in PTM is personal radiative thermal management (PRTM), which demonstrates immense potential with its high radiative heat transfer efficiency and ease of regulation. However, it is less taken into account in traditional textiles, and there currently lies a gap in our knowledge and understanding of PRTM. In this review, we aim to present a thorough analysis of advanced textile materials and technologies for PRTM. Specifically, we will introduce and discuss the underlying radiation heat transfer mechanisms, fabrication methods of textiles, and various indoor/outdoor applications in light of their different regulation functionalities, including radiative cooling, radiative heating, and dual-mode thermoregulation. Furthermore, we will shine a light on the current hurdles, propose potential strategies, and delve into future technology trends for PRTM with an emphasis on functionalities and applications.
Multi-Scenario Radiative Human Body Cooling with a Selective Emission-Transmission Textile

Xueke Wu,Jinlei Li,Qinyuan Jiang,Wenshuo Zhang,Baoshun Wang,Run Li,Siming Zhao,Fei Wang,Ya Huang,Pei Lyu,Yanlong Zhao,Jia Zhu,Rufan Zhang

DOI: https://doi.org/10.21203/rs.3.rs-1991851/v1

2022-01-01

Abstract:Abstract Radiative cooling (RC) is a promising sustainable human body cooling technology. However, there still lacks a RC material that can simultaneously enable efficient human body cooling in both outdoor and indoor hot scenarios. Here, we propose a selective emission-transmission (SET) RC model, which is featured with selective high emission in the atmospheric window waveband (8-13 μm) and high transmission in the remaining mid-infrared wavebands, to guide the design of multi-scenario RC materials. Assisted with designs at molecular and nano-scale, we demonstrated a polyoxymethylene (POM) nano-textile, which selectively exhibits high emittance of 75.7% in the 8-13 μm waveband, high human radiation transmittance of 48.5% (4-25 μm), and also a high solar reflectance of 94.7% (0.3-2.5 μm). As a result, the POM nano-textile exhibits superior human body cooling performance in various scenarios including sunny outdoor (2.6-8.8 ℃ cooling), cloudy outdoor (0.7-3.6 ℃ cooling) and indoor (0.5-1.2 ℃ cooling), compared to existing RC materials and commercial cotton. In addition, the POM nano-textile also possesses good wearability. When the POM nano-textile is tailored onto a protective clothing, it provides better cooling performance than its commercial counterpart. This work provides an alternative pathway towards multi-scenario personal thermal management.
Cool photonics for sustainable agriculture

Xiaopeng Bai,Xiaobo Yin

DOI: https://doi.org/10.1016/j.joule.2024.06.003

IF: 46.048

2024-07-18

Joule

Abstract:High temperatures cause thermal stress, impair plant physiology, and reduce crop yield. In a recent publication in Nexus, Wang et al. describe a radiative cooling mulch for soil cooling. This technique increases crop yield in hot climates by alleviating thermal stress on plant roots and reducing soil evaporation, facilitating sustainable agriculture in regions prone to thermal stress.

materials science, multidisciplinary,chemistry, physical,energy & fuels
Scalable wet-spinning of wearable chitosan-silica textile for all-day radiative cooling

Cheng Chen,Xiaoyu Jia,Xiaorui Li,Mingyang Shi,Jiayi Hu,Mengyao Song,Shuwang Wu,Hongliang Dai,Xingang Wang,Hongya Geng

DOI: https://doi.org/10.1016/j.cej.2023.146307

IF: 15.1

2023-10-06

Chemical Engineering Journal

Abstract:Passive radiative cooling for cost-effective personal thermal management (PTM) has received tremendous attention as it permits continuous subambient temperatures without energy consumption. Enhancing emission in the mid-infrared wavelength range and minimizing solar heat absorption are two independent processes that impart materials with effective radiative cooling performance. However, scalable all-day subambient cooling for PTM has been limited for wide applications due to the compromise between complex manufacturing and effective broadband radiative cooling. Herein, this work reports spectrally selective fabrics consisting of chitosan (CS) fibers and silica microparticles (SiO 2 ) for all-day PTM using a scabble and easy wet-spinning technique. Along with the porosity of the fiber, woven CS/SiO 2 textiles provide high reflectivity (82.3 %) in the solar window (wavelength λ, 0.3–2.5 μm) and high infrared emissivity (95.6 %) within the atmospheric transparency window (wavelength λ, 8–13 μm). Additionally, the textiles exhibit great cloth comfort due to the physical properties of fibers including flexibility, breathability, and strength. The cooling power of wearable textiles during daytime and nighttime is 95.7 W m −2 and 103.3 W m −2 . Comparing the outdoor thermal test results of nylon and cotton all day, the temperature difference of 11.2 °C and 5.4 °C proved the passive radiation cooling ability of the material. This effective radiative property arises from the chemical bond vibrations of the CS fabric matrix and phonon polarization resonance of SiO 2 microparticles. Our scalable and inexpensive radiative cooler could be an excellent wearable textile for practical all-day PTM.

engineering, chemical, environmental
A dual-mode textile for human body radiative heating and cooling

Po-Chun Hsu,Chong Liu,Alex Y. Song,Ze Zhang,Yucan Peng,Jin Xie,Kai Liu,Chun-Lan Wu,Peter B. Catrysse,Lili Cai,Shang Zhai,Arun Majumdar,Shanhui Fan,Yi Cui

DOI: https://doi.org/10.1126/sciadv.1700895

IF: 13.6

2017-11-03

Science Advances

Abstract:Dual-mode textiles made of nanoPE provide both cooling and heating, which helps humans adapt to larger temperature changes.

multidisciplinary sciences
Rendering passive radiative cooling capability to cotton textile by an alginate/CaCO3 coating via synergistic light manipulation and high water permeation

Yanran Liu,Hanfang Zhang,Yihe Zhang,Ce Liang,Qi An

DOI: https://doi.org/10.1016/j.compositesb.2022.109988

2022-07-01

Abstract:Personal thermal management textiles that put focus on cooling human body in hot environment attracts intense research interests since the urgent requirement for adjusting human activity to save energy even when we face extreme weather more frequently. Textiles produced from petrol-based fibers have shown their effective passive cooling effects. However, regeneratable passive cooling textiles are still lacking. In this study, we report a cotton-based effective passive cooling textile by interfacial engineering by alginate modification and in-situ generated CaCO3 particles. The Alg/CaCO3-cotton fabrics not only effectively cool the underlining surface via high reflectivity over solar spectra (∼90%) and high mid-infrared emissivity (0.97) in the atmospheric window, but also present enhanced water evaporation and water vapor permeation capabilities (36.51% higher water vapor transmission rate than pristine cotton fabric). The textile avoids overheating by 5.4 °C under direct solar irradiation, comparable to the performance of the reported petrol-based textile. The Alg/CaCO3-cotton also presents high washing stability, UV protection properties, faster drying and fire resistance properties. The surface engineering process is compatible with large-scale production. This work provides enlightening insights to regeneratable and wearable passive cooling materials and sheds light on the working mechanism of personal thermal management materials.

Photon-engineered radiative cooling textiles

Designing Textile Architectures for High Energy-Efficiency Human Body Sweat- and Cooling-Management

Recent Advancements in Radiative Cooling Textiles for Personal Thermal Management

Radiative cooling textiles using industry-standard particle-free nonporous micro-structured fibers

An Ultra-Thin Colored Textile with Simultaneous Solar and Passive Heating Abilities

Colored Woven Cloth-Based Textile for Passive Radiative Heating

Radiative human body cooling by nanoporous polyethylene textile

Personal Radiative Cooling Textile Generation

An all-weather radiative human body cooling textile

Temperature-adaptive dual-modal photonic textiles for thermal management

Spectrally engineered textiles for personal cooling

Bioinspired Fireproof Textiles with Hierarchical Micropore for Radiative Cooling and Perspiration

Photonics Empowered Passive Radiative Cooling

Outdoor Personal Thermal Management with Simultaneous Electricity Generation

Spectrally engineered textile for radiative cooling against urban heat islands

Personal Thermal Management by Radiative Cooling and Heating

Multi-Scenario Radiative Human Body Cooling with a Selective Emission-Transmission Textile

Cool photonics for sustainable agriculture

Scalable wet-spinning of wearable chitosan-silica textile for all-day radiative cooling

A dual-mode textile for human body radiative heating and cooling

Rendering passive radiative cooling capability to cotton textile by an alginate/CaCO3 coating via synergistic light manipulation and high water permeation