Abstract:This article presents a computational reliability analysis of reinforced soil-retaining structures (RSRS) under seismic conditions. The internal stability of RSRS is evaluated using the horizontal slice method (HSM) with modified pseudo-dynamic seismic forces. Two different failure modes of RSRS are identified and their reliability indices are computed using the first-order reliability method (FORM). The critical probabilistic failure surface is identified using a three-tier optimization scheme. Reliability index of the system is computed by considering the modes of failure to be connected in series. The tension mode is found to be the most critical mode of failure. The present study identifies that the wall height (H), shear wave velocity of the soil (Vs), and predominant frequency of the input motion (ω) govern the response of RSRS. Reliability indices depend on a parameter termed as the normalized frequency (ωH/Vs) and their values decrease with an increase in the value of ωH/Vs. Increase in the damping ratio of soil, increases the value of reliability indices, especially for ωH/Vs values, which are close to π/2. The FORM suffers from few critical shortcomings such as linear assumption of limit state surface at the most probable point of failure and its ability to consider only the statistical uncertainties excluding the effect of epistemic uncertainties. This calls for sampling-based numerical techniques such as Monte-Carlo simulation (MCS) which gives more comprehensive understanding of the problem under consideration in a probabilistic framework. Thus, a computationally efficient surrogate-assisted MCS is carried out to validate the present formulation and provide numerical insights by capturing the system dynamics over the entire design domain. Adoption of the efficient surrogate-assisted approach allowed us to quantify the epistemic uncertainty associated with the system using Gaussian white noise (GWN). Subsequently, its effects on the system reliability index and probabilistic behavior of the critical parameters are presented. The numerical results clearly indicate that it is imperative to take into account the probabilistic deviations of the critical performance parameters for RSRS to ensure adequate safety and serviceability under operational condition while quantifying the reliability of such systems.

System reliability analysis of soldier-piled excavation in unsaturated soil by combining random finite element and sequential compounding methods

Probabilistic Analysis of Underground Rock Excavations Using Response Surface Method and SORM

Efficient Reliability Analysis of Slopes Integrating the Random Field Method and a Gaussian Process Regression‐based Surrogate Model

Reliability Analysis of Deep Excavation Based on Field Monitoring Data

A practical reliability assessment approach and its application for pile-stabilized slopes using FORM and support vector machine

Reliability Analysis of Ground–support Interaction in Circular Tunnels Using the Response Surface Method

Simplified formula for settlement reliability analysis of flexible piles

Efficient computational system reliability analysis of reinforced soil-retaining structures under seismic conditions including the effect of simulated noise

Simplified Approach for Reliability-Based Design Against Basal-Heave Failure in Braced Excavations Considering Spatial Effect

Reliability analysis of basal-heave in a braced excavation in a 2-D random field

Reliability analysis of pile stabilized earth slopes using weighted uniform simulation method

Reliability analysis and risk assessment of pile-reinforced slopes considering spatial soil variability and site investigation

Reliability Analysis of Pile Group in Spatially Variable Unsaturated Expansive Soil Based on Load Transfer Method

Stochastic Analysis of Piled-Raft Foundations Using the Random Finite-Element Method

Probabilistic Based Reliability Slope Stability Analysis Using FOSM, FORM, and MCS

Reliability Analysis of Unsaturated Slope with Spatially Correlated Soil Properties

Reliability-based analysis of seismic bearing capacity of shallow strip footings resting on soils with randomly varying geotechnical and earthquake parameters

Reliability Analysis and Design of Vertically Loaded Piles in Spatially Variable Soils

Probabilistic seismic design of pile-supported building structure incorporating inherent variability of subsoil and ground motion uncertainty

Reliability analysis of submarine slope considering the spatial variability of the sediment strength using random fields

Reliability analysis of two–pile group in spatially variable soil considering differential settlement