Low-Temperature Methane Oxidation for Efficient Emission Control in Natural Gas Vehicles: Pd and Beyond

Dong Jiang,Konstantin Khivantsev,Yong Wang

DOI: https://doi.org/10.1021/acscatal.0c03338

IF: 12.9

2020-11-23

ACS Catalysis

Abstract:ACS CatalysisDOI: 10.1021/acscatal.0c03338

chemistry, physical

What problem does this paper attempt to address?

Engineering MOx/Ni Inverse Catalysts for Low-Temperature CO2 Activation with High Methane Yields

Chuqiao Song,Jinjia Liu,Ruihang Wang,Xin Tang,Kun Wang,Zirui Gao,Mi Peng,Haibo Li,Siyu Yao,Feng Yang,Hanfeng Lu,Zuwei Liao,Xiao-Dong Wen,Ding Ma,Xiaonian Li,Lili Lin

DOI: https://doi.org/10.1038/s44286-024-00122-5

2024-01-01

Abstract:Low-temperature methanation allows the near-equilibrium conversion of CO2 to methane at atmospheric pressure, promising remarkable energy efficiency and economic interests. However, it remains challenging for the efficient catalytic activation of CO2 at low temperature owing to the kinetic limitations of hydrogenation intermediates. Here we report that Ni-based inverse catalysts composed of oxide nano-islands loaded on metallic Ni support show significant activity advantages over traditional Ni/oxide with the same composition. The optimized CeZrOx/Ni catalyst realizes ~90% CO2 conversion and >99% CH4 selectivity at 200 °C and atmospheric pressure; it also exhibits excellent long-term stability and overheating/start–stop cyclic operation stability. Mechanistic studies show that the inverse interface effectively modulates H2 and CO2 coverage and alters the configuration of adsorbed oxygenates, which benefits the hydrogenation of surface intermediates. Energy and economic analyses demonstrate that the low-temperature CO2 methanation process powered by inverse catalysts potentially reduces both capital investment and methane production costs. Low-temperature CO2 methanation processes have potential for improved energy efficiency due to high equilibrium conversion but are generally limited by poor catalyst activity. Here the authors report an inverse CeZrOx/Ni catalyst that realizes high low-temperature (200 °C) methanation activity at ambient pressure.
Enhancing Low-Temperature Methane Conversion on Zn/ZSM-5 in the Presence of Methanol by Regulating the Methanol-to-aromatics Reaction Pathway

Zhixiang Xi,Bingjie Zhou,Yue Yu,Binbo Jiang,Zuwei Liao,Jingdai Wang,Zhengliang Huang,Yao Yang,Jingyuan Sun,Yongrong Yang

DOI: https://doi.org/10.1039/d0cy00449a

IF: 6.177

2020-01-01

Catalysis Science & Technology

Abstract:The co-reaction method provides an efficient strategy for methane conversion under mild conditions, which is of urgent importance for direct valorization of natural gas to liquid hydrocarbons.
Uniformly Dispersed Nano Pd-Ni Oxide Supported on Polyporous CeO2 and Its Application in Methane Conversion of Tail Gas from Dual-Fuel Engine

Chunlian Luo,Luwei Chen,Abdullah N. Alodhayb,Jianhua Wu,Mingwu Tan,Yanling Yang

DOI: https://doi.org/10.3390/catal14010024

IF: 3.9

2024-01-01

Catalysts

Abstract:The development of catalysts for low-temperature methane combustion is crucial in addressing the greenhouse effect. An effective industrial catalyst strategy involves optimizing noble metal utilization and boosting metal-metal interaction. Here, the PdNi-H catalyst was synthesized using the self-assembly method, achieving the high dispersion and close proximity of Pd and Ni atoms compared to the counterparts prepared by the impregnation method, as confirmed by EDS mapping. The XRD and TEM results revealed Pd2+ and Ni2+ doping within the CeO2 lattice, causing distortions and forming Pd-O-Ce or Ni-O-Ce structures. These structures promoted oxygen vacancy formation in CeO2, and this was further confirmed by the Raman and XPS results. Consequently, the PdNi-H catalyst demonstrated an excellent redox ability and catalytic activity, achieving lower ignition and complete methane burning temperatures at 282 and 387 degrees C, respectively. The highly dispersed PdNi species played a pivotal role in activating methane for enhanced redox ability. Additionally, the narrow size distribution range contributed to more vacancies on the surface of CeO2, as confirmed by the XPS results, thereby facilitating the activation of gas phase oxygen to form oxygen species (O-2(-)). This collaborative catalytic approach presents a promising strategy for developing efficient and stable methane combustion catalysts at low temperatures.
N-Doped Carbon–Silica Composite Confined Pd Nanoparticles for Abatement of Methane Emission from Automobiles

Chaoqun Zhou,Wenbin Xu,Chunjiang Liu,Xiamin Chen,Zhongyue Zhou,Hao Ma,Fei Qi

DOI: https://doi.org/10.1007/s11244-018-1099-7

IF: 2.781

2018-01-01

Topics in Catalysis

Abstract:Natural gas vehicles, as well as some other engines in automobiles, emit methane, which is a potent greenhouse gas. Developing advanced catalysts that can oxidize methane with good and stable activity is required for new emission standards of automobiles. We report here a N-doped carbon–silica composite that can well disperse Pd nanoparticles and preserve part of active Pd nanoparticles (< 8 nm) under typical conditions of exhaust gas from a working engine. Comparative studies indicate a stronger metal-support interaction between Pd nanoparticle and N-doped carbon (NC) than none N-doped carbon. A facile silica coating is formed from SiCl4 in water vapor. The silica coating encapsulates Pd/NC and prevents extreme Pd sintering. The Pd catalyst with N-doped carbon–silica composite, i.e. (Pd/NC)@SiO2, performs stable and complete conversion of 5000 ppm CH4 to CO2 and H2O at 350 °C with a space velocity of 40,000 cm3 per gram of catalyst per hour. This research illustrates the advantage of using N-doped carbons supported catalyst for methane oxidation. Future optimization could be attempted by improving the thermal stability of carbons at the reaction conditions.
Creating Atomically Iridium-Doped PdO x Nanoparticles for Efficient and Durable Methane Abatement

Yingjie Wang,Guangyan Xu,Yanwei Sun,Wei Shi,Xiaoyan Shi,Yunbo Yu,Hong He

DOI: https://doi.org/10.1021/acs.est.4c00868

IF: 11.4

2024-05-11

Environmental Science & Technology

Abstract:The urgent environmental concern of methane abatement, attributed to its high global warming potential, necessitates the development of methane oxidation catalysts (MOC) with enhanced low-temperature activity and durability. Herein, an iridium-doped PdOx nanoparticle supported on silicalite-1 zeolite (PdIr/S-1) catalyst was synthesized and applied for methane catalytic combustion. Comprehensive characterizations confirmed the atomically dispersed nature of iridium on the surface of PdOx...

environmental sciences,engineering, environmental
Onset of High Methane Combustion Rates over Supported Palladium Catalysts: From Isolated Pd Cations to PdO Nanoparticles

Yanran Cui,Johnny Zhu Chen,Bo Peng,Libor Kovarik,Arun Devaraj,Zhe Li,Tao Ma,Yilin Wang,Janos Szanyi,Jeffrey T. Miller,Yong Wang,Feng Gao

DOI: https://doi.org/10.1021/jacsau.0c00109

IF: 8

2021-03-25

JACS Au

Abstract:Industrial low-temperature methane combustion catalyst Pd/Al2O3 suffers from H2O-induced deactivation. It is imperative to design Pd catalysts free from this deactivation and with high atomic efficiency. Using a small-pore zeolite SSZ-13 as support, herein we report well-defined Pd catalysts with dominant active species as finely dispersed Pd cations, uniform PdO particles embedded inside the zeolite framework, or PdO particles decorating the zeolite external surface. Through detailed reaction kinetics and spectroscopic and microscopic studies, we show that finely dispersed sites are much less active than PdO nanoparticles. We further demonstrate that H2O-induced deactivation can be readily circumvented by using zeolite supports with high Si/Al ratios. Finally, we provide a few rational catalyst design suggestions for methane oxidation based on the new knowledge learned in this study.This article has not yet been cited by other publications.
Pd or PdO: Catalytic active site of methane oxidation operated close to stoichiometric air-to-fuel for natural gas vehicles

Fujin Huang,Jianjun Chen,Wei Hu,Guangxia Li,Yang Wu,Shandong Yuan,Lin Zhong,Yaoqiang Chen

DOI: https://doi.org/10.1016/j.apcatb.2017.07.037

2017-01-01

Abstract:•Over Pd catalyst supported on La-modified alumina with and without CeO2-ZrO2 dopant, the active sites for CH4 oxidation operated close to stoichiometric λ value were investigated by ex situ XPS.•The oxidation state of Pd was affected by the direction of λ value change, and the CeO2-ZrO2 dopant is beneficial to maintain Pd species in formation of PdO.•Under rich conditions, both metal Pd and PdO can serve as active phase for CH4 oxidation.•However, PdO is the dominant active site under net oxidizing conditions.
Anchoring Pt-Doped PdO Nanoparticles on γ-Al 2 O 3 with Highly Dispersed La Sites to Create a Methane Oxidation Catalyst

Zhi Liu,Guangyan Xu,Lingyou Zeng,Wei Shi,Yingjie Wang,Yanwei Sun,Yunbo Yu,Hong He

DOI: https://doi.org/10.1016/j.apcatb.2022.122259

2022-12-07

Abstract:Catalysts for the complete oxidation of methane suffer from poor physical and chemical stability regarding their noble metal active sites. Herein, we prepared a PtPd-La 1 /Al 2 O 3 catalyst by loading highly dispersed La species and Pt-PdO nanoparticles on γ-Al 2 O 3 support, exhibiting significantly enhanced hydrothermal and long-term stability under the harsh conditions of simulated natural gas vehicle (NGV) exhaust. Over PtPd-La 1 /Al 2 O 3 , PdO nanoparticles (NPs) can be anchored by highly dispersed La sites through electron transfer from La to PdO, inhibiting the sintering of Pd species during hydrothermal aging. Pt uniformly doped in PdO creates high-efficiency Pt sites and unsaturated Pd sites (as well as Pd sites adjacent to O defects) for water-resistance, further enhancing long-term stability. Thus, this work provides the potential to resolve tough challenges related to methane emission control on NGVs.

chemistry, physical,engineering, chemical, environmental
Operando and Kinetic Study of Low-Temperature, Lean-Burn Methane Combustion over a Pd/γ-Al2O3 Catalyst

Jing Xu,Like Ouyang,Wei Mao,Xue-Jing Yang,Xin-Chao Xu,Jun-Jie Su,Ting-Zhou Zhuang,Hui Li,Yi-Fan Han

DOI: https://doi.org/10.1021/cs200694k

IF: 12.9

2012-01-01

ACS Catalysis

Abstract:Operando and kinetic studies of lean-burn methane combustion were preformed on a Pd(3.3 wt %)/gamma-Al2O3 catalyst in a low temperature range of 473-673 K. The reaction order with respect to oxygen decreased with temperature, and the order with respect to methane remained constant. The working catalyst is characterized using operando Raman spectroscopy and in situ diffuse reflectance infrared Fourier transform spectroscopy of CO adsorption (DRIFTS), and the Pd chemical states were measured with X-ray photoelectron spectroscopy (XPS). Partial oxidation of Pd atoms during reaction was identified by Raman and XPS spectroscopies. In particular, the DRIFT spectra revealed that similar to 45% of Pd atoms at the top layers were transferred into PdOx species above 523 K. The reaction was assumed to occur primarily on the metallic Pd sites below 673 K, proceeding through the Langmuir-Hinshelwood mechanism, and Pd oxide may affect the adsorption and activation of reactants.
Dynamic and reversible transformations of subnanometre-sized palladium on ceria for efficient methane removal

Dong Jiang,Gang Wan,Joakim Halldin Stenlid,Carlos E. García-Vargas,Jianghao Zhang,Chengjun Sun,Junrui Li,Frank Abild-Pedersen,Christopher J. Tassone,Yong Wang

DOI: https://doi.org/10.1038/s41929-023-00983-8

IF: 37.8

2023-07-21

Nature Catalysis

Abstract:Reversibly adjusting the active structures of supported metal catalysts in response to dynamic working conditions has long been pursued. Here we report the reaction-environment-modulated transformations of subnanometre-sized Pd on CeO 2 for efficient methane removal, leveraging the reaction environments at different stages of automotive exhaust aftertreatment. During the cold start of vehicles, inactive Pd 1 single atoms are readily transformed into PdO x subnanometre clusters by CO even at room temperature with excess O 2 , resulting in boosted low-temperature CH 4 oxidation. At elevated temperatures, dispersion of PdO x cluster into Pd 1 against metal sintering renders outstanding hydrothermal stability to the catalyst, to be activated during the next vehicle start. Combined experimental and computational studies elucidate the dynamically evolved Pd speciation on CeO 2 at an atomic level. Modulating the reversible nature of supported metals helps overcome the long-existing trade-off between low-temperature activity and high-temperature stability, also providing a new paradigm for designing intelligent catalysts that brings single-atom/cluster catalysts closer to real applications.

chemistry, physical
Catalytic Oxidation of Methane to Oxygenated Products: Recent Advancements and Prospects for Electrocatalytic and Photocatalytic Conversion at Low Temperatures

Cheoulwoo Oh,Hyesung Park,Yun Jeong Hwang,Ming Ma,Jong Hyeok Park,Md. Selim Arif Sher Shah

DOI: https://doi.org/10.1002/advs.202001946

IF: 15.1

2020-10-27

Advanced Science

Abstract:Methane is an important fossil fuel and widely available on the earth's crust. It is a greenhouse gas that has more severe warming effect than CO2. Unfortunately, the emission of methane into the atmosphere has long been ignored and considered as a trivial matter. Therefore, emphatic effort must be put into decreasing the concentration of methane in the atmosphere of the earth. At the same time, the conversion of less valuable methane into value‐added chemicals is of significant importance in the chemical and pharmaceutical industries. Although, the transformation of methane to valuable chemicals and fuels is considered the "holy grail," the low intrinsic reactivity of its CH bonds is still a major challenge. This review discusses the advancements in the electrocatalytic and photocatalytic oxidation of methane at low temperatures with products containing oxygen atom(s). Additionally, the future research direction is noted that may be adopted for methane oxidation via electrocatalysis and photocatalysis at low temperatures.

materials science, multidisciplinary,nanoscience & nanotechnology,chemistry
Monomeric metal species for low‐temperature methane oxidation

Tao Yu,Yue Jiang,Wenhao Luo

DOI: https://doi.org/10.1002/cctc.202401437

IF: 4.5

2024-10-17

ChemCatChem

Abstract:Direct oxidation of methane into value‐added chemicals is considered as one of the holy grails in chemistry and catalysis. Considerable efforts have been devoted to developing advanced catalyst systems operated under mild conditions, and mononuclear metal species, which are currently in the spotlight of methane oxidation, have shown great advantages and addressed significant attention. In this Concept, we highlight the recent breakthroughs and developments in monomeric metal species for low‐temperature (<100 °C) methane oxidation. Emphasis is put on the identification and validation of monomeric metal species as the intrinsic active sites. Promising characterization approaches for identifying catalytically relevant features of physicochemical properties of monomeric metal species are discussed, as well as the emerging insights on the development of in situ characterization technologies. Finally, the open challenges and outlooks for rational development of monomeric metal catalysts for methane valorization are examined for guiding further developments and inspiring the future work.

chemistry, physical
Electron transferring with oxygen defects on Ni-promoted Pd/Al 2 O 3 catalysts for low-temperature lean methane combustion

Jieying Cai,Jingyi Wang,Congwei Liu,Yan Zhang,Yun Liu,Peng Wang,Xuehai Wang,Xiangchen Fang,Yunbo Yu,Wenpo Shan

DOI: https://doi.org/10.1016/j.jcis.2024.05.196

IF: 9.9

2024-05-29

Journal of Colloid and Interface Science

Abstract:Methane (CH 4 ) is the second most consequential greenhouse gas after CO 2 , with a substantial global warming potential. The CH 4 catalytic combustion offers an efficient method for the elimination of CH 4 . However, improving the catalytic performance of Pd-based materials for low-temperature methane combustion remains a big challenge. In this study, we synthesized an enhanced Pd/5NiAlO x catalyst that demonstrated superior catalytic activity and improved water resistance compared to the Pd/Al 2 O 3 catalyst. Specifically, the T 90 was decreased by over 100 °C under both dry and wet gas conditions. Introducing Ni resulted in an enormously enhanced number of oxygen defects on the obtained 5NiAlO x support. This defect-rich support facilitates the anchoring of PdO through increased electron transfer, thereby inhibiting the production of high-valence Pd (2+δ)+ and stimulating the generation of unsaturated Pd sites. Pd 0 can effectively activate surface oxygen and PdO plays a significant role in activating CH 4 , resulting in high activity for Pd/5NiAlO x . On the other hand, the increased water resistance of Pd/5NiAlO x was mainly due to the generation of *OOH species and the lower accumulation of surface OH − species during the reaction process.

chemistry, physical
New Insights into the Role of Pd-Ce Interface for Methane Activation on Monolithic Supported Pd Catalysts: A Step Forward the Development of Novel PGM Three-Way Catalysts for Natural Gas Fueled Engines

Jianjun Chen,Yang Wu,Wei Hu,Pengfei Qu,Guochen Zhang,Pascal Granger,Lin Zhong,Yaoqiang Chen

DOI: https://doi.org/10.1016/j.apcatb.2019.118475

IF: 24.319

2020-01-01

Applied Catalysis B Environmental

Abstract:This study reports a significant impact of the calcination temperature on the performances of Pd/Al2O3-CeO2 Three-Way-Catalysts to treat exhaust from natural gas fueled vehicles. Calcination from 550 degrees C to 950 degrees C led to Pd particles in the range 1.9-8.5 nm. It was found that PdO can be reduced to more active Pd-0 species under stoichiometric NGV conditions. More specifically, the 1.9 nm Pd particles, developing stronger Pd-Ce interaction were found more reducible and correspond to enhanced catalytic properties towards methane abatement. At high calcination temperature, corresponding to larger Pd particles, the deterioration of the Pd-Ce interface is accompanied with lower TOF jointly with higher activation barriers. Accordingly, the Pd-0-PdO interaction becomes prevalent to activate methane. Based on these observations, it was concluded that Pd-0-Ce and Pd-0-PdO interface related to the Pd particle size may be considered as criteria for identifying the performance of Pd-based NGV catalysts.
Catalysis base for optimal utilization of natural gas

Xinhe Bao

2008-01-01

Abstract:The talk will be focused on the chemical conversion of natural gas (main methane) to high value chemicals and liquid fuel, with emphasis on the innovation and application of the catalysts and catalytic process. Three processes referring to the selective conversion of methane in the different temperature ranges will be introduced: (1) Selective oxidation of methane with the combination of the three redox couples Pd2+/Pd0, Q/H2Q, and NO2/NO in CF3COOH for the one-pot aerobic oxidation of methane at 80°C; (2) Oxidative coupling of methane by using the confined nano-sized silver catalysts in the mesoporous channel at 400°C ∼600°C. (3) Non-oxidative aromatization of methane by using Mo-modified MWW zeolites and a coupling process with OCM at 700°C.
Combined Redox Couples for Catalytic Oxidation of Methane by Dioxygen at Low Temperatures.

Zengji An an,Xiulian Pan,Xiumei Liu,Xiuwen Han,Xinhe Bao

DOI: https://doi.org/10.1021/ja0647912

IF: 15

2006-01-01

Journal of the American Chemical Society

Abstract:The combination of three redox couples Pd2+/Pd0-quinone/hydroquinone-NO2/NO creates an electron-transfer loop, which facilitates one-pot catalytic oxidation of methane selectively to methanol by dioxygen in CF3COOH at a temperature as low as 80 degrees C. This is the first example where an organic cocatalyst significantly increases the catalytic efficiency of a transition metal in the selective oxidation of methane in the presence of dioxygen.
Mechanism and Kinetics of Methane Oxidation to Methanol Catalyzed by AuPd Nanocatalysts at Low Temperature

Rui Serra-Maia,F. Marc Michel,Temple A. Douglas,Yijin Kang,Eric A. Stach

DOI: https://doi.org/10.1021/acscatal.0c04487

IF: 12.9

2021-01-01

ACS Catalysis

Abstract:The selective oxidation of methane to methanol at ambient conditions has the potential to enable the use of natural gas obtained in remote areas. We performed multivariate statistical analysis of 137 laboratory experiments to show that gold-palladium nanocatalysts unlock the reaction pathway that forms methanol, but the overall rate of methane oxidation does not correlate with the total number of active sites because the catalyst does not participate in the rate limiting step of the reaction. Using an H2O2 concentration below 2.5 x 10(-5) mol/L reduces the H2O2 overuse up to 10,000 times and promotes a methanol selectivity greater than 0.8 without compromising the reaction productivity. These results have enormous practical importance for methane utilization because they explain the poor methane conversion rates obtained thus far and show the path to increase the methanol productivity and reduce the overuse of industrially expensive H2O2.
PGM based catalysts for exhaust-gas after-treatment under typical diesel, gasoline and gas engine conditions with focus on methane and formaldehyde oxidation

Andreas Gremminger,Josh Pihl,Maria Casapu,Jan-Dierk Grunwaldt,Todd J. Toops,Olaf Deutschmann

DOI: https://doi.org/10.1016/j.apcatb.2019.118571

2020-05-01

Abstract:The HC and CO oxidation activity of Pt/Al2O3, Pd/Al2O3 and Pd-Pt/Al2O3 catalysts was compared under three exhaust-gas model conditions typical for stoichiometric gasoline as well as lean burn diesel by means of temperature programed conversion tests on laboratory test benches. In order to understand the differences in emission reduction performance, the impact of gas mixture composition was systematically studied with a particular focus on methane and formaldehyde conversionThe catalysts used in this study were prepared by incipient wetness impregnation of Al2O3 followed by washcoating on ceramic honeycombs, and were pre-treated in an equal manner before each activity test.Distinct differences in pollutant conversion were observed over the three catalysts under the investigated conditions. Pd-based monometallic and bimetallic catalysts revealed the lowest temperature for CH4 oxidation (<450 °C) under lean conditions, being lower under lean Diesel than Compressed Natural Gas (CNG) conditions. The reason for this behavior seems to be the higher water concentration in the CNG gas mixture. Furthermore, it was found that the presence of HCs shift the conversion of methane to higher temperatures, most probably due to produced water during combustion of the HCs. Pt/Al2O3 on the other hand only converts methane at temperatures above 500 °C but no sensitivity to water or the amount of additional HCs was observed. The lowest light-out temperature for formaldehyde oxidation in excess of oxygen was measured on Pt/Al2O3 with full conversion below 125 °C. While this was the case for a model gas mixture of HCHO, H2O and O2, under simulated lean burn gas engine conditions, formaldehyde is oxidized at lower temperature on Pd-Pt/Al2O3 than on Pt/Al2O3 due to the strong inhibiting effect of CO on Pt-particles.Under stoichiometric gasoline conditions, Pt had the highest activity for methane oxidation whereas Pd/Al2O3 and Pd-Pt/Al2O3 hardly convert methane below 500 °C. Unsaturated HCs and CO on the other hand were converted at lower temperature over Pd containing monometallic and bimetallic catalysts in comparison to Pt/Al2O3, showing once again the multiple and complex effects generated by variations in exhaust gas mixture and catalyst composition.
Catalytic Oxidation of Methane: Pd and Beyond

Matteo Monai,Tiziano Montini,Raymond J. Gorte,Paolo Fornasiero

DOI: https://doi.org/10.1002/ejic.201800326

IF: 2.551

2018-06-11

European Journal of Inorganic Chemistry

Abstract:This brief review is focused on recent advancements in methane catalytic oxidation, an important reaction for environmental remediation and clean power generation. Particular attention is given to Pd‐based catalysts and novel strategies to gain a fundamental understanding of the reaction mechanism and to improve the catalytic activity and stability of Pd catalysts. The power of combined approaches exploiting nanostructured catalysts, operando spectroscopic and microscopic measurements and computational methods is demonstrated.

chemistry, inorganic & nuclear

Low-Temperature Methane Oxidation for Efficient Emission Control in Natural Gas Vehicles: Pd and Beyond

Engineering MOx/Ni Inverse Catalysts for Low-Temperature CO2 Activation with High Methane Yields

Enhancing Low-Temperature Methane Conversion on Zn/ZSM-5 in the Presence of Methanol by Regulating the Methanol-to-aromatics Reaction Pathway

Uniformly Dispersed Nano Pd-Ni Oxide Supported on Polyporous CeO<sub>2</sub> and Its Application in Methane Conversion of Tail Gas from Dual-Fuel Engine

N-Doped Carbon–Silica Composite Confined Pd Nanoparticles for Abatement of Methane Emission from Automobiles

Creating Atomically Iridium-Doped PdO x Nanoparticles for Efficient and Durable Methane Abatement

Onset of High Methane Combustion Rates over Supported Palladium Catalysts: From Isolated Pd Cations to PdO Nanoparticles

Pd or PdO: Catalytic active site of methane oxidation operated close to stoichiometric air-to-fuel for natural gas vehicles

Anchoring Pt-Doped PdO Nanoparticles on γ-Al 2 O 3 with Highly Dispersed La Sites to Create a Methane Oxidation Catalyst

Operando and Kinetic Study of Low-Temperature, Lean-Burn Methane Combustion over a Pd/γ-Al2O3 Catalyst

Dynamic and reversible transformations of subnanometre-sized palladium on ceria for efficient methane removal

Catalytic Oxidation of Methane to Oxygenated Products: Recent Advancements and Prospects for Electrocatalytic and Photocatalytic Conversion at Low Temperatures

Monomeric metal species for low‐temperature methane oxidation

Electron transferring with oxygen defects on Ni-promoted Pd/Al 2 O 3 catalysts for low-temperature lean methane combustion

New Insights into the Role of Pd-Ce Interface for Methane Activation on Monolithic Supported Pd Catalysts: A Step Forward the Development of Novel PGM Three-Way Catalysts for Natural Gas Fueled Engines

Catalysis base for optimal utilization of natural gas

Combined Redox Couples for Catalytic Oxidation of Methane by Dioxygen at Low Temperatures.

Mechanism and Kinetics of Methane Oxidation to Methanol Catalyzed by AuPd Nanocatalysts at Low Temperature

PGM based catalysts for exhaust-gas after-treatment under typical diesel, gasoline and gas engine conditions with focus on methane and formaldehyde oxidation

Catalytic Oxidation of Methane: Pd and Beyond