Abstract:Biobased plastics have the potential to be sustainable, but to explore their circularity further, current end-of-life options need to be broadened. Mechanical recycling is one of the most accepted methods to bring back plastics into the loop. Polyhydroxybutyrates (PHBs) are biobased and biodegradable in nature with promising properties and varied applications in the market. This study focuses on their potential for mechanical recycling by multiple extrusion cycles (E1-E5) and multi-faceted characterization of the virgin (V) and reprocessed materials from E1 to E5. The behavior is compared to polypropylene (PP) as a reference with a similar property profile, which has also been reprocessed five times. The thermal properties of both series showed a stable melting point and thermal decomposition temperature from thermal analyses (differential scanning calorimetry (DSC) and thermogravimetric analysis (TGA)). However, a steady increase in the degree of crystallinity was observed which could counterbalance the decrease in molecular weight due to repeated extrusion measured by gel permeation chromatography and resulted in similar values of tensile strength across the cycles. The strain at break was impacted after the first extrusion, but no significant change was observed thereafter; the same was observed for impact strength. Even in scanning electron microscopy (SEM) images, virgin and E5 samples appeared similar, showing the stability of morphological characteristics. Fourier transform infrared spectroscopy (FTIR) results revealed that no new groups are being formed even on repeated processing. The deviation between the PHB and PP series was more predominant in the melt mass flow rate (MFR) and rheology studies. There was a drastic drop in the MFR values in PHB from virgin to E5, whereas not much difference was observed for PP throughout the cycles. This observation was corroborated by frequency sweeps conducted with the parallel plate method. The viscosity dropped from virgin to E1 and E2, but from E3 to E5 it presented similar values. This was in contrast to PP, where all the samples from virgin to E5 had the same values of viscosity. This paper highlights the possibilities of mechanical recycling of PHB and explains why future work with the addition of virgin material and other additives is an area to be explored.

Mechanically Robust Supramolecular Plastics with Energy-Saving and Highly Efficient Closed-Loop Recyclability

Oxidative Upcycling of Polyolefin Wastes into the Dynamically Cross-Linked Elastomer

Closed-loop recycling of polyethylene-like materials

Closed-loop recycling of plastics enabled by dynamic covalent diketoenamine bonds

Closed-Loop Recyclable Aliphatic Poly(ester-amide)s with Tunable Mechanical Properties

High-Performance Chemically Recyclable Multifunctional Polyolefin-Like Biomass-Derived Polyester Materials

Chemical Synthesis of CO 2 -Based Polymers with Enhanced Thermal Stability and Unexpected Recyclability from Biosourced Monomers

Disequilibrating Dynamic Polymers for Spontaneous Recyclability

Dynamically Cross‐Linking Soybean Oil and Low‐Molecular‐Weight Polylactic Acid toward Mechanically Robust, Degradable, and Recyclable Supramolecular Plastics

Hybrid Chemomechanical Plastics Recycling: Solvent-free, High-Speed Reactive Extrusion of Low-Density Polyethylene

Closed-loop chemical recycling of cross-linked polymeric materials based on reversible amidation chemistry

Closing the loop for poly(butylene-adipate- co -terephthalate) recycling: depolymerization, monomers separation, and upcycling

Impact of Multiple Reprocessing on Properties of Polyhydroxybutyrate and Polypropylene

High‐Performance Dynamic Photo‐Responsive Polymers With Superior Closed‐Loop Recyclability

Closed-loop chemical recycling of a biobased poly(oxanorbornene-fused γ-butyrolactone)

The Effect of Mechanical Recycling on the Thermal, Mechanical, and Chemical Properties of Poly (Butylene Adipate-Co-Terephthalate) (PBAT), Poly (Butylene Succinate) (PBS), Poly (Lactic Acid) (PLA), PBAT-PBS Blend and PBAT-TPS Biocomposite

Closed‐Loop Recyclable Poly(ester‐disulfide)s for Potential Alternatives to Engineering Plastic

Closing the Loop for Benzylic Polyacylhydrazone(PAcHy) Soft Materials

Closed‐loop recycling of mixed plastics of polyester and CO2‐based polycarbonate to a single monomer

Dual Recycling of Depolymerization Catalyst and Biodegradable Polyester that Markedly Outperforms Polyolefins

Catalytic thiolation-depolymerization-like decomposition of oxyphenylene-type super engineering plastics via selective carbon–oxygen main chain cleavages