Abstract:Spheroidized ferrite-cementite steel (SFC) is susceptible to micro-defects owing to the mismatched deformation between the ferrite and cementite during cold forming, which seriously deteriorates the fatigue life. However, the damage mechanism related to microstructural features in the SFC steel during cold deformation has not been fully investigated, hindering control of the microstructure and forming process. This study presents a method coupled with experiments and multiscale simulations to research the damage mechanisms and the dependence of microstructure features under uniaxial tension in SFC steel. In situ tensile test revealed three damage mechanisms in SFC steel under uniaxial tension: cementite cracking, ferrite/cementite interface debonding, and ferrite cracking. In particular, the final fracture was mainly dominated by the ferrite/cementite interface debonding. In multiscale simulations, the macroscale tensile and nanoindentation simulations were carried out to obtain the strain history and mechanical properties of the mesoscale simulations, respectively. The mesoscale IP-based RVE and CP-based unit cells simulations were performed to capture the driving forces from the three damage mechanisms and the dependence of microstructural features, respectively. The nanoscale molecular dynamics simulation was conducted to identify the model parameters of cohesive zone model (CZM) in the mesoscale simulations. The numerical results indicated that particle-cracking void occurred when the internal von Mises stress exceeded the ultimate strength of the cementite particles. Interface-debonding void nucleated when the load on the particle was insufficient to resist its strength. Matrix-cracking should be attributed to the stress concentration caused by the dislocation pile-up or the crossing of multiple slip bands. In addition, interfacial debonding were more likely to occur in the stable orientations and high-angle grain boundaries of ferrite matrix. Compared with a circular cementite particle, an elliptical particle was more prone to cause interfacial debonding. Also, the ferrite/ferrite grain boundary showed earlier interfacial debonding perpendicular to the loading direction than parallel to the loading direction.

Investigating the Effect of Cementite Particle Size and Distribution on Local Stress and Strain Evolution in Spheroidized Medium Carbon Steels using Crystal Plasticity‐Based Numerical Simulations

A micro mechanical study on tensile behavior of steel sheets with spheroidal cementite using crystal plasticity finite element method

Improved Ultra-Low Cycle Fatigue Fracture Models for Structural Steels Considering the Dependence of Cyclic Damage Degradation Parameters on Stress Triaxiality

Investigation of damage mechanisms related to microstructural features of ferrite-cementite steels via experiments and multiscale simulations

An Insight into the Creep-Fatigue Damage Localization in Welded Joints Based on Crystal Plasticity Finite Element Method

Microstructure-Based Modeling of Deformation in Steels Based on Constitutive Relationships from Micropillar Compression

An investigation of the combined size and rate effects on the mechanical responses of FCC metals

A Unique Numerical Iterative Approach for Modelling Individual Phase Stress-Strain Curves in Dual Phase Steel

Studying the Damage Evolution and the Micro-Mechanical Response of X8CrMnNi16-6-6 TRIP Steel Matrix and 10% Zirconia Particle Composite Using a Calibrated Physics and Crystal-Plasticity-Based Numerical Simulation Model

In Situ Study of Cementite Deformation and Its Fracture Mechanism in Pearlitic Steels

A Damage-Effect-involved Phenomenological Crystal Plasticity Model and Computational Methods for Mechanical Responses of FeCrAl Alloys

Analysis and Modeling of Stress-Strain Curves in Microalloyed Steels Based on a Dislocation Density Evolution Model

Crystal plasticity analysis of scale dependent mechanical properties of ferrite/cementite fine lamellar structure in pearlite steel

Three-Dimensional Micromechanical Modeling of Martensite Particle Size Effects on the Deformation Behavior of Dual-Phase Steels

Understanding Cementite Dissolution in Pearlitic Steels Subjected to Rolling-Sliding Contact Loading: A Combined Experimental and Theoretical Study

Extensive anisotropic lath martensite plasticity in dual-phase steels: A numerical-experimental investigation

Microstructure-informed, predictive crystal plasticity finite element model of fatigue-dwells

Analyzing the Effects of Cr and Mo on the Pearlite Formation in Hypereutectoid Steel Using Experiments and Phase Field Numerical Simulations

Crystal Plasticity Model Analysis for the Macro-to-Micro Mechanical Behavior of Different Sub-Regions in a Marine Steel Weld

Multiscale Analysis And Numerical Modeling Of The Portevin-Le Chatelier Effect

Influence of carbon content and carbide morphology of carbon steels on stress strain curve in vicinity of yield point