Abstract:The biggest challenge faced in oil refineries is the removal of sulfur compounds in fuel oil. The sulfur compounds which are found in fuel oil such as gasoline and diesel, react with oxygen in the atmosphere to produce sulfur oxide (SOx) gases when combusted. These sulfur compounds produced from the reaction with oxygen in the atmosphere may result in various health problems and environmental effects. Hydrodesulfurization (HDS) is the conventional process used to remove sulfur compounds from fuel oil. However, the high operating conditions required for this process and its inefficiency in removing the organosulfur compounds turn to be the major drawbacks of this system. Researchers have also studied several alternatives to remove sulfur from fuel oil. The use of ionic liquids (ILs) has also drawn the interest of researchers to incorporate them in the desulfurization process. The environmental effects resulting from the use of these ILs can be eliminated using eutectic-based ionic liquids (EILs), which are known as greener solvents. In this research, a combination of extractive desulfurization (EDS) and oxidative desulfurization (ODS) using a photocatalyst and EIL was studied. The photocatalyst used is a pre-reported catalyst, Cu-Fe/TiO2 and the EIL were synthesized by mixing choline chloride (ChCl) with organic acids. The acids used for the EILs were propionic acid (PA) and p-toluenesulfonic acid (TSA). The EILs synthesized were characterized using thermogravimetry analyser (TGA) differential scanning calorimetry (DSC) analysis to determine the physical properties of the EILs. Based on the TGA analysis, ChCl (1): PA (3) obtained the highest thermal stability whereas, as for the DSC analysis, all synthesized EILs have a lower melting point than its pure component. Further evaluation on the best EIL for the desulfurization process was carried out in a photo-reactor under UV light in the presence of Cu-Fe/TiO2 photocatalyst and hydrogen peroxide (H2O2). Once the oxidation and extraction process were completed, the oil phase of the mixture was analyzed using high performance liquid chromatography (HPLC) to measure the sulfur removal efficiency. In terms of the desulfurization efficiency, the EIL of ChCl (1): TSA (2) showed a removal efficiency of about 99.07%.

An Integrated Process of Reductive Desulfurization by Sodium Borohydride and Its Electroreduction Regeneration in Ionic Liquid

A Study of the Desulfurization Selectivity of a Reductive and Extractive Desulfurization Process with Sodium Borohydride in Polyethylene Glycol

Deep Catalytic Oxidative Desulfurization of Fuels by Novel Lewis Acidic Ionic Liquids

A novel elemental sulfur reduction and sulfide oxidation integrated process for wastewater treatment and sulfur recycling

Desulfurization of Diesel Using Ionic Liquids: Process Design and Optimization Using COSMO-Based Models and Aspen Plus

Deep desulfurization of model oil using ionic liquid and active carbon binary system

Oxidative Extractive Desulfurization System for Fuel Oil Using Acidic Eutectic-Based Ionic Liquid

Deep Desulfurization of Fuels Using Imidazole Anion-Based Ionic Liquids

A new strategy to effectively capture and recover SO2 based on the functional porous liquids

A New Process of Solveing Corrosion Problem of Refined Liquefied Gas

Oxidative Desulfurization of FCC Diesel Oil Using Amphiphilic Catalyst Combined with Solvent Extraction

Advances in Deep Desulfurization of Fuel Oils by Extraction with Ionic Liquids

Deep removal of sulfur from real diesel by catalytic oxidation with halogen-free ionic liquid

Ionic Liquids As Extraction Desulfurizers and Corrosion Inhibitors: Experimental and Theoretical Studies

Deep Desulfurization of Model Oil by Extraction with a Low-viscosity Ionic Liquid [BMIM]SCN

Ionic Liquids as Green and Efficient Desulfurization Media Aiming at Clean Fuel

Study of Extraction Desulfurization Capability of FCC Gasoline by Sulfate Ionic Liquids

Synthesis of nanofluids composed of deep eutectic solvents and metal-modified MCM-41 particles as multifunctional promoters for fuel oil desulfurization

Extraction of Dibenzyl Disulfide from Transformer Oils by Acidic Ionic Liquid

Efficient desulfurization of gasoline fuel using ionic liquid extraction as a complementary process to adsorptive desulfurization

Efficient Extractive Desulfurization of Fuel Oils Using N‐Pyrrolidone/Alkylphosphate‐Based Ionic Liquids