Abstract:Time-of-flight (TOF) Lidar is widely used in capturing three-dimensional (3D) structure and reflectivity information. For using Geiger-mode avalanche photodiode (Gm-APD) and the technique time correlated single photon counting (TCSPC), a direct-detection 3D imaging lidar has high sensitivity in low-light-level (LLL) scene. Traditional method needs long fixed dwell time to collect tens of thousands of photons to find accurate range and mitigate Poisson noise at each pixel. We present a method that acquires accurate depth and intensity images using a small amount of detected echo photons and having quantitative analysis to estimate whether results are in the confidence interval. Based on prior knowledge that the echo signal is in the shape of emitted laser, we use one or two orders of magnitude back-reflected photons less than traditional method, fitting a curve of laser-return pulse by nonlinear least-squares fitting in order to obtain the range. The condition of moving to next pixel in our method is acquiring a fixed number of back-reflected photons, instead of sampling for a fixed time. This adaptive jump condition is able to speed up the scanning without more distortion. The results are analyzed with chi-square test to determine if the curve we fit has enough credibility. This quantitative analysis provides an important judgment condition for our method of fitting curve to recover the depth image. Experimental results demonstrate that our method is able to obtain the millimeter accuracy depth image in the confidence interval using hundreds of photons and increases photon-efficiency more than 10-fold over traditional method. Thus our method will be useful in LLL scene, such as military reconnaissance and remote sensing.

Spatially modulated scene illumination for intensity-compensated 2D array photon-counting LiDAR imaging

Optimization of System Design and Calibration Algorithm for SPAD-Based LiDAR Imager

A Hybrid Solid-State Beam Scanner for LiDAR Applications

A Fully Solid-State Beam Scanner for FMCW LiDAR Application

Airborne Single-Photon LiDAR Towards a Small-Sized and Low-Power Payload

A photon-efficient method based on curve fitting for photon counting 3D imaging lidar

Real-time computational photon-counting LiDAR

Pixel Multiplexing Technique For Real-Time Three-Dimensional-Imaging Laser Detection And Ranging System Using Four Linear-Mode Avalanche Photodiodes

Solid-State Dtof LiDAR System Using an Eight-Channel Addressable, 20w/ch Transmitter, and a 128x128 SPAD Receiver with SNR-Based Pixel Binning and Resolution Upscaling.

Multi-beam single-photon-counting three-dimensional imaging lidar

Photon counting lidar working in daylight

Detection performance improvement method of single-photon LiDAR by the combination of speckle suppression with adaptive adjustment of aperture diameter and spatial correlation method

Low Intensity LiDAR using Compressed Sensing and a Photon Number Resolving Detector

Long Range 3D Imaging Through Atmospheric Obscurants Using Array-Based Single-Photon LiDAR.

Enhancing LiDAR performance using threshold photon-number-resolving detection

Long-range High-Speed Laser Imaging Based on VCSEL Array and MPPC Array.

Single-photon depth imaging using a photodetector with a wire-bonding quenching resistor

Reconstruction method of 128 × 256 array single photon Lidar based on multi-domain stability feature fusion

Background Light Rejection in SPAD-Based LiDAR Sensors by Adaptive Photon Coincidence Detection

Solid-state FMCW LiDAR with Two-Dimensional Spectral Scanning Using a Virtually Imaged Phased Array.

Quantum Induced Coherence Light Detection and Ranging