Abstract:To provide a long-time reliable orientation, sensor fusion technologies are widely used to integrate available inertial sensors for the low-cost orientation estimation. In this paper, a novel dual-linear Kalman filter was designed for a multi-sensor system integrating MEMS gyros, an accelerometer, and a magnetometer. The proposed filter precludes the impacts of magnetic disturbances on the pitch and roll which the heading is subjected to. The filter can achieve robust orientation estimation for different statistical models of the sensors. The root mean square errors (RMSE) of the estimated attitude angles are reduced by 30.6% under magnetic disturbances. Owing to the reduction of system complexity achieved by smaller matrix operations, the mean total time consumption is reduced by 23.8%. Meanwhile, the separated filter offers greater flexibility for the system configuration, as it is possible to switch on or off the second stage filter to include or exclude the magnetometer compensation for the heading. Online experiments were performed on the homemade miniature orientation determination system (MODS) with the turntable. The average RMSE of estimated orientation are less than 0.4° and 1° during the static and low-dynamic tests, respectively. More realistic tests on two-wheel self-balancing vehicle driving and indoor pedestrian walking were carried out to evaluate the performance of the designed MODS when high accelerations and angular rates were introduced. Test results demonstrate that the MODS is applicable for the orientation estimation under various dynamic conditions. This paper provides a feasible alternative for low-cost orientation determination.

A novel adaptive Kalman filter for Euler-angle-based MEMS IMU/magnetometer attitude estimation

Research on Attitude Estimation Algorithm Based on Kalman Filer

Extended Kalman Filter for IMU Attitude Estimation Using Magnetometer, MEMS Accelerometer and Gyroscope

A Dual-Linear Kalman Filter for Real-Time Orientation Determination System Using Low-Cost MEMS Sensors

Effective Adaptive Kalman Filter for MEMS-IMU/Magnetometers Integrated Attitude and Heading Reference Systems

The design of an extended Kalman filter for magnetometer and MEMS gyroscope/accelerometer integrated attitude determination

A Novel Approach for Attitude Estimation Based on MEMS Inertial Sensors Using Nonlinear Complementary Filters

Compounded Calibration Based on FNN and Attitude Estimation Method Using Intelligent Filtering for Low Cost MEMS Sensor Application

Fuzzy Adaptive Extended Kalman Filter for Miniature Attitude and Heading Reference System

Robust Kalman Filtering for Attitude Estimation Using Low-Cost Mems-Based Sensors

A Fusion Attitude Determination Method Based on Quaternion for MEMS Gyro/accelerometer/magnetometer

Method for measuring non-stationary motion attitude based on MEMS-IMU array data fusion and adaptive filtering

Keeping a Good Attitude: A Quaternion-Based Orientation Filter for IMUs and MARGs

Attitude Estimation Fusing Quasi-Newton and Cubature Kalman Filtering for Inertial Navigation System Aided with Magnetic Sensors

An EKF-Based Attitude Estimator for Eliminating the Effect of Magnetometer Measurements on Pitch and Roll Angles

A Linear Fusion Algorithm for Attitude Determination Using Low Cost Mems-Based Sensors

MIMU/Magnetometer Attitude Estimation Filtering Algorithm Based on State Constraint

An adaptive cascaded Kalman filter for two-antenna GPS/MEMS-IMU integration

Study on Extended Kalman Filtering for Attitude Estimation of Micro Flight Vehicle

Attitude and heading measurement based on adaptive complementary Kalman filter for PS/MIMU integrated system.

Adaptive Kalman Filter for Orientation Estimation in Micro-Sensor Motion Capture.