Abstract:mpg-C3N4/anatase TiO2 with reactive {001} facets composites were synthesized via a facile ultrasonic dispersion method. Incorporation of mpg-C3N4 into anatase TiO2 was successfully confirmed by X-ray diffraction (XRD). The percentage of exposed {001} facets in TiO2 calculated from the Raman spectra was 80.6%. The microstructure and optical properties of the as-prepared samples were characterized by scanning electron microscopy (SEM), transmission electron microscopy (TEM), nitrogen adsorption-desorption isotherms, UV-vis diffuse reflectance spectra (DRS) and photoluminescence (PL) spectroscopy. The effects of mass ratios of mpg-C3N4/(TiO2 + mpg-C3N4) on the photocatalytic activities of the mpg-C3N4/TiO2 composites were investigated. The photocatalytic experiments indicated that the mpg-C3N4/TiO2 composites showed a much higher photocatalytic activity than the pristine TiO2 and mpg-C3N4 for the degradation of methylene blue (MB) under UV light and visible light irradiation. This enhancement should be attributed to the reactive {001} facets of TiO2 and the heterojunction formed at the interface between anatase TiO2 and mpg-C3N4, thus resulting in a much lower recombination rate of the photoinduced electrons and holes. Compared with the decolorization process, mineralization is slower. The degradation of 2,4-dichlorophenol suggests that the dye sensitization is not the main cause of dye degradation. In addition, the quenching effects of different scavengers proved that the superoxide radicals (O-center dot(2)-) and holes (h(+)) were the main factors for the improved photoactivity under UV-light, while the superoxide radicals (O-center dot(2)-) play important roles in the photocatalytic reaction under visible light irradiation. Repeatability experiments of MB degradation suggest that the mpg-C3N4/TiO2 composites have high stability. The photocatalytic degradations of MB, RhB and MO were measured under UV and visible light irradiation and the photocatalytic degradation efficiency was found to be in the decreasing order of RhB > MB > MO. These results indicate that the incorporation of mpg-C3N4 into anatase TiO2 with reactive {001} facets is an effective method to improve the photocatalytic activity under both UV and visible light.

Preparation of graphdiyne-doped TiO2/SiO2 composite for enhanced photocatalytic activity

In-situ route for the graphitized carbon/TiO<sub>2</sub> composite photocatalysts with enhanced removal efficiency to emerging phenolic pollutants

mpg-C3N4/anatase TiO2 with reactive {001} facets composites to enhance the photocatalytic activity of organic dye degradation

Graphitic Carbon Nitride Facilely Modified with Pyromellitic Diimide with Enhanced Photocatalytic Activity and Good Selectivity Towards the Photodegradation of Cationic Dyes

Composite of TiO2 Nanoparticles and Carbon Nanotubes Loaded on Poly(methyl Methacrylate) Nanofibers: Preparation and Photocatalytic Performance

In-situ route for the graphitized carbon/TiO2 composite photocatalysts with enhanced removal efficiency to emerging phenolic pollutants

Synthesis and properties of Sm‐TiO 2 coupled with g‐C 3 N 4 for improved photocatalytic degradation toward methylene blue and tetracycline under visible‐light irradiation

Visible-light Enhancement of Methylene Blue Photodegradation by Graphitic Carbon Nitride-Titania Composites

Photocatalytic Degradation of Organic Dyes by a High Efficient TiO<sub>2</sub>-Based Catalysts Under Solar Light Irradiation

Preparation of Graphene Doped Titanium Dioxide Compo -site and Study on Treatment of Laboratory Wastewater

Preparation of TiO2/g-C3N4 composites and photocatalytic degradation unsymmetrical dimethylhydrazine waste water

Synthesis of TiO2@lignin based carbon nanofibers composite materials with highly efficient photocatalytic to methylene blue dye

Fabrication of GO-TiO2/(Ca,Y)F2:Tm,Yb composites with high-efficiency optical driving photocatalytic activity for degradation of organic dyes and bacteriostasis

Preparation of S-doped TiO 2 -Three Dimensional Graphene Aerogels As a Highly Efficient Photocatalyst

Magnetic TiO2@Fe3O4/reduced graphene oxide nanocomposites with enhanced photocatalytic activities

Cu-doped TiO 2 Nanoparticles/graphene Composites for Efficient Visible-Light Photocatalysis

Integrated Nanostructures of TiO2/g-C3N4/Diatomite Based on Low-Grade Diatomite as Efficient Catalyst for Photocatalytic Degradation of Methylene Blue: Performance and Mechanism

Efficient photocatalytic degradation of aqueous organic pollutants by using an advanced TiO2/Ti3C2/montmorillonite composites

Fabrication of visible-light responsive TiO2@C photocatalyst with an ultra-thin carbon layer to efficiently degrade organic pollutants

N, S co-doped graphene quantum dots-graphene-TiO2 nanotubes composite with enhanced photocatalytic activity

Au/TiO2/Graphene Composite with Enhanced Photocatalytic Activity Under Both UV and Visible Light Irradiation