Abstract:Benzidine (Bz) was used to modify the nanofiller, manganese dioxide (MnO2), and the resulting Bz/MnO2 was then encased in pure epoxy resin (EP) with graphitic carbon nitride (GCN). The effectiveness of epoxy-coated mild steel in protecting against varying concentrations of GCN/Bz-MnO2 was assessed through the use of electrochemical techniques in natural seawater. The flame retardancy capabilities of the epoxy coating were significantly improved by the incorporation of GCN/Bz-MnO2. The EP-GCN-Bz/MnO2 nanocomposites display peak heat release rate (PHRR) and total heat release (THR) values which are 79 % and 62 % lesser than that of pure EP, respectively. When compared to a pure epoxy coating, the results of salt spray tests indicated that the addition of GCN/Bz-MnO2 improved corrosion protection and decreased water absorption. Electrochemical impedance spectroscopy (EIS) studies showed that the epoxy-GCN/Bz-MnO2 coating still had an improved resistance of 6.40E10 Ω.cm2 even after 30 days of exposure to seawater. Scanning electrochemical microscopy (SECM) displayed lowest ferrous ion dissipation (1.0 I/nA) in the EP-GCN/Bz-MnO2 nanocomposite coated steel. Potentiodynamic polarization testing showed that EP-GCN-Bz/MnO2 had a lower current density (i corr: 0.03 µA/cm2) in comparison with other coatings. This is mainly because the Bz alteration of the MnO2 nanoparticles and their successful coordination with GCN sheets result in a noticeably more compact nanostructure that lowers aggregation and increases binding capacity. Surface-modified GCN was found to be improved in its breakdown products, leading to the production of a strong, inert nanolayered covering, according to Scanning electron microscopy with energy dispersive X-ray spectroscopy (SEM/EDX) analysis. Water contact angle (WCA) of 160° demonstrates the exceptional water resistance of the recently developed EP-GCN/Bz-MnO2 coating. In terms of hardness and adhesion strength, Bz/MnO2 wrapped in GCN had good mechanical characteristics on the epoxy substrate. The improved adhesive strength (18.3 MPa) for mild steel coated with EP-GCN/Bz-MnO2 was attained prior to being immersed in seawater. The EP-GCN/Bz-MnO2 crystallizes form a robust, inert coating that prevents ions from accessing the specimen. The coating has increased adhesive strength as a result, and it can withstand deep immersions without losing its integrity. Hence, the EP-GCN/Bz-MnO2 nanocomposite might work as a useful coating component in the automotive industry.

Functionalized multi-walled carbon nanotube/polyindole incorporated epoxy: An effective anti-corrosion coating material for mild steel

Designing a smart epoxy anti-corrosion coating loaded with molybdate-doped polythiophene nano-hybrid self-assembled multi-walled carbon nanotube

Design and synergistic effect of nano-sized epoxy-NiCo2O4 nanocomposites for anticorrosion applications

A New Strategy for Long-Term Smart Corrosion Protection of Q235 Carbon Steel Using Polyaniline Nanofiber Covalently Linking with Modified GO as Reinforcement of Epoxy Coating

Multifunctional graphitic carbon nitride/manganese dioxide/epoxy nanocomposite coating on steel for enhanced anticorrosion, flame retardant, mechanical, and hydrophobic properties

Developing epoxy-based anti-corrosion functional nanocomposite coating with CaFe-Tolyl-triazole layered double hydroxide@g-C3N4 as nanofillers on Q235 steel substrate against NaCl corrosive environment

Achieving superior anticorrosion and antibiofouling performance of polyaniline/graphitic carbon nitride composite coating

A simple strategy to significantly improve the anticorrosion and aging resistance of epoxy coatings by adding polyaniline modified multi-walled carbon nanotubes

Developing multi-wall carbon nanotubes/Fusion-bonded epoxy powder nanocomposite coatings with superior anti-corrosion and mechanical properties

Functionalized Ti3c2tx-Based Nanocomposite Coatings for Anticorrosion and Antifouling Applications

Corrosion protection of mild steel with nanofibrous polyaniline-based coatings

Efficient Anticorrosion Coatings Based on Waste Tea Bags-Derived Nanocrystalline Cellulose-Incorporated Polyaniline Nanocomposites

Smart epoxy coating: g-C3N4 nanosheets loaded MOFs for enhanced anti-corrosion and UV resistance

Nanocomposites of Polybenzoxazine-Functionalized Multiwalled Carbon Nanotubes and Polybenzoxazine for Anticorrosion Application

Protection of Mild Steel by Waterborne Epoxy Coatings Incorporation of Polypyrrole Nanowires/Graphene Nanocomposites

Developing a dual-functional self-healing nanocomposite utilizing oxidized-multiwall carbon nanotube/highly-porous metal-organic framework (OCNT/ZIF-8) nano-hybrid

Anticorrosion Performance of TiO2/Epoxy Films with Doped Polyaniline and Poly(o-ethoxyaniline) Applied to Carbon Steel in 3.5 wt % NaCl Acid Solution

Preparation of Polyaniline/cellulose Nanofiber Composites with Enhanced Anticorrosion Performance for Waterborne Epoxy Resin Coatings

Construction of a high-performance anti-corrosion epoxy coating in the presence of poly(aniline-co-pyrrole) nanospheres

Self-healing epoxy composite coating based on polypyrrole@MOF nanoparticles for the long-efficiency corrosion protection on steels

Novel multilayer structural epoxy composite coating containing graphene oxide and silanized chromium carbide for the protection of steel structures