Heat‐Resistant Intermetallic Compounds and Ceramic Dispersion Alloys for Additive Manufacturing: A Review

Vladislav Yakubov,Jamie J. Kruzic,Xiaopeng Li

DOI: https://doi.org/10.1002/adem.202200159

IF: 3.6

2022-03-31

Advanced Engineering Materials

Abstract:Advanced Engineering Materials, Accepted Article.

materials science, multidisciplinary

What problem does this paper attempt to address?

Additive manufacturing of heat-resistant aluminum alloys: A review

Chaoqun Wu,Jianyu Wen,Jinliang Zhang,Bo Song,Yusheng Shi

DOI: https://doi.org/10.1088/2631-7990/ad7f2e

2024-09-26

International Journal of Extreme Manufacturing

Abstract:The capabilities in synergistic advancements of both making and shaping afforded by additive manufacturing (AM) enables the flexible production of high-performance components. Boosted by the growing demand for heat-resistant aluminum alloys in the moderate-temperature weight-critical applications, AM of heat-resistant aluminum alloys constitutes a burgeoning field. Although numerous advances have emerged in recent years, there remains a gap in the review literature elucidating the newly-developed alloy systems and critically evaluating the efficacy. This state-of-the-art review presents a detailed overview of recent achievements on the heat-resistant aluminum alloy development. It begins with the introduction of various AM technologies and the pros and cons of each technique are evaluated. The enhancement mechanisms associated with printability and high-temperature properties of AM aluminum alloys are then delineated. Thereafter, the various additively manufactured aluminum alloy systems are discussed with regard to the microstructure, heat resistance and high-temperature performance. An emphasis is put on the powder bed fusion – laser beam (PBF-LB) as it has garnered significant attention for heat-resistant aluminum alloys and the vast majority of the current studies are based on this technique. Finally, perspectives are outlined to provide guidance for future research.

engineering, manufacturing,materials science, multidisciplinary
Additive manufacturing of high-entropy alloy composites: A review

Hamza OSMAN,Hamza OSMAN,Lin LIU

DOI: https://doi.org/10.1016/s1003-6326(22)66086-2

IF: 3.752

2023-01-01

Transactions of Nonferrous Metals Society of China

Abstract:High entropy alloy composites (HEACs) are a new class of metal matrix composites involving a second phase, such as carbides, borides, and nitrides in high entropy alloy matrices. In recent years, HEACs have attracted wide attention due to their outstanding properties. However, the preparation of HEACs encounters great challenges when using conventional casting approaches due to serious composition segregation. 3D printing techniques solved this problem and produced components with complex geometry. Therefore, 3D printing techniques have been applied to fabricating HEAC components, and a few works on this topic have been published. To accommodate the rapid development of 3D printing of HEACs, we present a state-of-the-art overview of the recent progress of HEAC 3D printing. The article begins with an introduction of HEAs and 3D-printed HEACs. The processes of HEAC powders development, including gas atomization and mechanical alloying, are presented. The 3D printing processes of HEAC powders, such as powder bed fusion and directed metal deposition, and their microstructures are discussed. The mechanical properties of 3D-printed HEACs are discussed and compared with 3D-printed HEAs and their casting counterparts, and their hardness, resistance to wear, corrosion, and oxidation are discussed. Finally, new perspectives are outlined for future research.

metallurgy & metallurgical engineering
Research development of heat-resistant aluminium alloys

Fei Liang-jun

Abstract:Heat-resistant aluminum alloys had been used widely in ordnance,aerospace and automotive industry for the excellent intermediate temperature properties.The research developments of heat-resistant aluminum alloys were reviewed in this paper,the influence of various alloy elements on the heat resistance of aluminum alloy was introduced in detail.The solution strengthening,dispersion strengthening,surplus strengthening and grain boundary strengthening of aluminum alloys were summarized,and the future development trend of heat-resistant aluminum alloys was discussed.

Engineering,Materials Science
A Review of Emerging Metallic System for High-Energy Beam Additive Manufacturing: Al–Co–Cr–Fe–Ni High Entropy Alloys

Yinuo Guo,Haijun Su,Peixin Yang,Yong Zhao,Zhonglin Shen,Yuan Liu,Di Zhao,Hao Jiang,Jun Zhang,Lin Liu,Hengzhi Fu

DOI: https://doi.org/10.1007/s40195-022-01400-y

2022-04-09

Acta Metallurgica Sinica (English Letters)

Abstract:Al–Co–Cr–Fe–Ni high entropy alloy (HEA) system is a newly developed category of metallic materials possessing unique microstructure, mechanical and functional properties, which presents many promising industrial applications. In recent years, additive manufacturing technology has given rise to a great potential for fabricating HEA parts of ultra-fine grains and geometrical complexity, thereby attracting great interest of researchers. Herein, a comprehensive review emphasizes on the recent developments in high-energy beam additive manufacturing of Al–Co–Cr–Fe–Ni HEA, in the aspects of their printing processes, microstructures, properties, defects, and post treatments. The technical characteristics of three typical high-energy beam additive manufacturing technologies for printing HEA, namely, selective laser melting (SLM), selective electron beam melting (SEBM), and directed energy deposition (DED) are systematically summarized. Typical crystal structure, grain, microstructure, as well as corresponding properties of Al–Co–Cr–Fe–Ni HEA manufactured by those technologies are primarily presented and discussed. It also elaborates the formation mechanisms of harmful defects related to the rapid solidification and complex thermal cycle during high-energy beam additive manufacturing. Furthermore, several kinds of post treatments with an aim to improve performance of HEA are illustrated. Finally, future research directions for HEA by additive manufacturing are outlined to tackle current challenges and accelerate their applications in industrial fields.
Thermal stability of Ni-based superalloys fabricated through additive manufacturing: A review

Hedayat Hamdi,Hamid Reza Abedi

DOI: https://doi.org/10.1016/j.jmrt.2024.04.161

IF: 6.267

2024-04-26

Journal of Materials Research and Technology

Abstract:Additive manufacturing (AM) is a cutting-edge technique that builds parts by adding layers from a digital design and depositing materials selectively where required. AM is vital in industries like aerospace, healthcare, and automotive because of benefits like design flexibility, cost-efficiency, and customization over conventional methods. Ni-based superalloys AM processes involve phenomena like solidification, phase change, different microstructure characteristics, and melting pool boundaries, affecting both microstructure and mechanical properties. Ni-based superalloys are regarded as potential candidates for high-temperature applications, thanks to their capability to benefit from various strengthening mechanisms such as precipitation hardening and solid solution strengthening. This comprehensive review explores the thermal stability and high temperature softening resistance of additively manufactured (AMed) Ni-based superalloys, from microstructural and mechanical points of view. This review explores the thermal stability and high temperature softening resistance of additively manufactured Ni-based superalloys. It explores the interplay of alloying elements at high temperature, additive manufacturing parameters, and initial microstructure, focusing on grain boundary/sub-boundary networks evolution. The influence of solute drag effect, second phases Zenner pinning effect, and post-processing treatments on microstructural changes such as second phase characteristics, recrystallization (static and dynamic), grain growth phenomena, and textural variations is also analyzed. High temperature mechanical properties of AM-Ni-based superalloys are evaluated, including yield and tensile strength, elongation, work-hardening behavior, creep, and fatigue properties. Hydrogen embrittlement is a significant reason for failure, so this issue is briefly assessed in AM-Ni-based superalloys. Results show that understanding relationships between processing, microstructure, post-processing treatment, and properties is crucial for thermal stability control.

materials science, multidisciplinary,metallurgy & metallurgical engineering
Additive Manufacturing of High-Entropy Alloys: A Review

Shuying Chen,Yang Tong,Peter K Liaw

DOI: https://doi.org/10.3390/e20120937

2018-12-06

Abstract:Owing to the reduced defects, low cost, and high efficiency, the additive manufacturing (AM) technique has attracted increasingly attention and has been applied in high-entropy alloys (HEAs) in recent years. It was found that AM-processed HEAs possess an optimized microstructure and improved mechanical properties. However, no report has been proposed to review the application of the AM method in preparing bulk HEAs. Hence, it is necessary to introduce AM-processed HEAs in terms of applications, microstructures, mechanical properties, and challenges to provide readers with fundamental understanding. Specifically, we reviewed (1) the application of AM methods in the fabrication of HEAs and (2) the post-heat treatment effect on the microstructural evolution and mechanical properties. Compared with the casting counterparts, AM-HEAs were found to have a superior yield strength and ductility as a consequence of the fine microstructure formed during the rapid solidification in the fabrication process. The post-treatment, such as high isostatic pressing (HIP), can further enhance their properties by removing the existing fabrication defects and residual stress in the AM-HEAs. Furthermore, the mechanical properties can be tuned by either reducing the pre-heating temperature to hinder the phase partitioning or modifying the composition of the HEA to stabilize the solid-solution phase or ductile intermetallic phase in AM materials. Moreover, the processing parameters, fabrication orientation, and scanning method can be optimized to further improve the mechanical performance of the as-built-HEAs.
An additively manufactured heat-resistant Al-Ce-Sc-Zr alloy: Microstructure, mechanical properties and thermal stability

Ziwei Yang,Chao Chen,Dan Li,Yiyou Wu,Zhaowen Geng,Vladimir Konakov,Kechao Zhou

DOI: https://doi.org/10.1016/j.msea.2023.144965

2023-05-01

Abstract:In this study, a high-strength and heat-resistant Al–Ce–Sc–Zr alloy was designed and fabricated by additive manufacturing. The as-built alloy shows an excellent combination of strength and ductility compared to other Al–Ce-based alloys, including an ultimate tensile strength of 445 MPa, a yield strength of 344 MPa and an elongation of 10%. Even at 300 °C, the alloy still retains a superb tensile yield strength of 233 MPa, which is the best among the high-temperature aluminum alloys reported so far. The excellent performance is mainly attributed to a significant amount of fine, homogeneous and coarsening-resistant Al11Ce3 intermetallic nanoparticles formed during the rapid solidification process of laser additive manufacturing. The formation of coherent Al3(Sc, Zr) nano-precipitates and interfacial segregation at the interface of intermetallic nanoparticles during high temperature exposure further improve the high temperature properties of the alloy. Our work has the potential to provide design concepts for the development of novel high temperature aluminum alloys.

materials science, multidisciplinary,nanoscience & nanotechnology,metallurgy & metallurgical engineering
Progress in Additive Manufacturing of High-Entropy Alloys

Bin Chen

DOI: https://doi.org/10.3390/ma17235917

IF: 3.4

2024-12-05

Materials

Abstract:High-entropy alloys (HEAs) have drawn substantial attention on account of their outstanding properties. Additive manufacturing (AM), which has emerged as a successful approach for fabricating metallic materials, allows for the production of complex components based on three-dimensional (3D) computer-aided design (CAD) models. This paper reviews the advancements in the AM of HEAs, encompassing a variety of AM techniques, including selective laser melting (SLM), selective laser sintering (SLS), selective electron beam melting (SEBM), directed energy deposition (DED), binder jetting (BJT), direct ink writing (DIW), and additive friction stir deposition (AFSD). Additionally, the study discusses the powders and wires utilized in AM, the post-processing of AM-processed HEAs, as well as the mechanical and corrosion properties of these alloys. The unique ultra-fine and non-equilibrium microstructures achieved through AM result in superior mechanical properties of HEAs, like improved strength and ductility. However, research regarding certain aspects of HEA AM, such as fatigue properties and creep deformation behavior, is still relatively scarce. Future research should focus on overcoming the existing limitations and exploring the potential of HEAs in various applications.

materials science, multidisciplinary,chemistry, physical,physics, applied, condensed matter,metallurgy & metallurgical engineering
Heat-resistant Al alloys: microstructural design and microalloying effect

H. Xue,C. Yang,P. Zhang,S. H. Wu,G. Liu,J. Sun

DOI: https://doi.org/10.1007/s10853-023-09295-5

IF: 4.5

2024-01-20

Journal of Materials Science

Abstract:Lightweight strategy is essential for the development of transportation vehicles and aerospace industries. As a type of lightweight material, high-strength aluminum alloys are limited to service temperatures below 200 °C due to the rapid coarsening of strengthening nano-precipitates, which cannot satisfy the increasing demands of practical applications. High-temperature applications beyond 250 °C become the bottle-neck problem of Al alloys. In this paper, we review existing literature on the improvement of high-temperature performance of aluminum alloys by stabilizing nano-precipitates. On the basis of atomic-scale microstructure regulation, several design strategies, such as interface segregation, co-precipitation, core/shell structure, and interstitial ordering, have been proposed, resulting in the development of a number of heat-resistant Al alloys for use at 300–400 °C. Moreover, the fundamental theories of solid-state phase transformation, especially precipitation aging and coarsening, are correspondingly advanced on the frontiers of science.

materials science, multidisciplinary
A new high-throughput method using additive manufacturing for alloy design and heat treatment optimization

Yunhao Zhao,Noah Sargent,Kun Li,Wei Xiong

DOI: https://doi.org/10.1016/j.mtla.2020.100835

2020-09-01

Materialia

Abstract:Alloys made by Additive Manufacturing (AM) require careful design of post-heat treatment as an indispensable step of microstructure engineering to enhance performance. We developed a high-throughput approach to accelerate the heat treatment optimization for AM alloys by fabricating a long-bar sample heat-treated under a monitored gradient temperature zone for phase transformation study. This approach has been proven efficient in determining the aging temperature with peak hardness. We observed that precipitation strengthening is the predominant strengthening mechanism for the studied superalloy made by laser powder bed fusion, and the grain size variation is insensitive to temperatures between 605 and 825°C. This new approach can be applied to post-heat treatment optimization of other materials made by AM, and further assist new alloy development.

English Else
Advancements and future prospects of additive manufacturing in high-entropy alloy applications

S. Ragunath,N. Radhika,Bassiouny Saleh

DOI: https://doi.org/10.1016/j.jallcom.2024.174859

IF: 6.2

2024-05-20

Journal of Alloys and Compounds

Abstract:A comprehensive review of Additive Manufacturing (AM) of High Entropy Alloys (HEAs) is presented, exploring the opportunities for producing advanced components with tailored properties through design-based alloys. HEAs have emerged as promising metallic materials with unique properties that cater to the needs of modern industries. The utilization of AM, a 3D printing technology, allows for the creation of intricately designed products with minimized defects by tailoring microstructural features. The combination of HEAs and AM offers exceptional mechanical properties, improved wear resistance, and enhanced corrosion behavior by optimizing process parameters. This article thoroughly reviews recent advancements in fabricating AM-built parts using HEAs, focusing on powder feedstock, microstructural aspects, phase formation, strengthening mechanisms, and resulting mechanical properties. Furthermore, it explores various applications of AM-processed HEAs in industries such as medical, hydrogen storage, aerospace, nuclear, coating, and automotive, providing detailed insights into their usage. The challenges encountered during the AM process are discussed, and future directions for enhancing the quality of customized products are outlined. This review article offers valuable insights into the realm of additive manufacturing AM of HEAs, incorporating recent developments. It catalyzes future research endeavors in this field.

materials science, multidisciplinary,metallurgy & metallurgical engineering,chemistry, physical
Microstructure and Properties of Novel Heat Resistant Al–Ce–Cu Alloy for Additive Manufacturing

D. R. Manca,A. Yu. Churyumov,A. V. Pozdniakov,A. S. Prosviryakov,D. K. Ryabov,A. Yu. Krokhin,V. A. Korolev,D. K. Daubarayte

DOI: https://doi.org/10.1007/s12540-018-00211-0

IF: 3.451

2018-11-22

Metals and Materials International

Abstract:Abstract The microstructure and properties of the novel heat resistant Al–3Ce–7Cu alloy produced by selective laser melting were investigated. Fine Al11Ce3 and Al6.5CeCu6.5 eutectic phases were found in the microstructure. Annealing at temperatures in the 250–400 °C range leads to a decrease in the hardness. Hardness has larger values after annealing at 350 and 400 °C than at 250 °C due to the precipitation of nanosized particles. The low hardness after quenching and aging at 190 °C is caused by quench stress relief and the absence of aging hardening because of poor solid solution. The as-printed yield strength, ultimate tensile strength and elongation are 274 MPa, 456 MPa and 4.4%, respectively. High mechanical properties of the Al–3Ce–7Cu alloy were demonstrated by high temperature tension and compression tests.

materials science, multidisciplinary,metallurgy & metallurgical engineering
High-throughput Alloy and Process Design for Metal Additive Manufacturing

Sofia Sheikh,Brent Vela,Pejman Honarmandi,Peter Morcos,David Shoukr,Abdelrahman Mostafa Kotb,Raymundo Arroyave,Ibrahim Karaman,Alaa Elwany

2023-04-09

Abstract:Designing alloys for additive manufacturing (AM) presents significant opportunities. Still, the chemical composition and processing conditions required for printability (ie., their suitability for fabrication via AM) are challenging to explore using solely experimental means. In this work, we develop a high-throughput (HTP) computational framework to guide the search for highly printable alloys and appropriate processing parameters. The framework uses material properties from state-of-the-art databases, processing parameters, and simulated melt pool profiles to predict process-induced defects, such as lack-of-fusion, keyholing, and balling. We accelerate the printability assessment using a deep learning surrogate for a thermal model, enabling a 1,000-fold acceleration in assessing the printability of a given alloy at no loss in accuracy when compared with conventional physics-based thermal models. We verify and validate the framework by constructing printability maps for the CoCrFeMnNi Cantor alloy system and comparing our predictions to an exhaustive 'in-house' database. The framework enables the systematic investigation of the printability of a wide range of alloys in the broader Co-Cr-Fe-Mn-Ni HEA system. We identified the most promising alloys that were suitable for high-temperature applications and had the narrowest solidification ranges, and that was the least susceptible to balling, hot-cracking, and the formation of macroscopic printing defects. A new metric for the global printability of an alloy is constructed and is further used for the ranking of candidate alloys. The proposed framework is expected to be integrated into ICME approaches to accelerate the discovery and optimization of novel high-performance, printable alloys.

Materials Science
Heat treatment for metal additive manufacturing

Majid Laleh,Esmaeil Sadeghi,Reynier I. Revilla,Qi Chao,Nima Haghdadi,Anthony E. Hughes,Wei Xu,Iris De Graeve,Ma Qian,Ian Gibson,Mike Y. Tan

DOI: https://doi.org/10.1016/j.pmatsci.2022.101051

IF: 48.165

2023-03-01

Progress in Materials Science

Abstract:Metal additive manufacturing (AM) refers to any process of making 3D metal parts layer-upon-layer via the interaction between a heating source and feeding material from a digital design model. The rapid heating and cooling attributes inherent to such an AM process result in heterogeneous microstructures and the accumulation of internal stresses. Post-processing heat treatment is often needed to modify the microstructure and/or alleviate residual stresses to achieve properties comparable or superior to those of the conventionally manufactured (CM) counterparts. However, the optimal heat treatment conditions remain to be defined for the majority of AM alloys and are becoming another topical issue of AM research due to its industrial importance. Existing heat treatment standards for CM metals and alloys are not specifically designed for AM parts and may differ in many cases depending on the initial microstructures and desired properties for specific applications. The purpose of this paper is to critically review current knowledge and discuss the influence of post-AM heat treatment on microstructure, mechanical properties, and corrosion behavior of the major categories of AM metals including steel, Ni-based superalloys, Al alloys, Ti alloys, and high entropy alloys. This review clarifies significant differences between heat treating AM metals and their CM counterparts. The major sources of differences include microstructural heterogeneity, internal defects, and residual stresses. Understanding the influence of such differences will benefit industry by achieving AM metals with consistent and superior balanced performance compared to as-built AM and CM metals.

materials science, multidisciplinary
Effect of in-Situ Intrinsic Heat Treatment in Metal Additive Manufacturing: A Comprehensive Review

Sivakumar Munusamy,J. Jerald

DOI: https://doi.org/10.1007/s12540-023-01462-2

IF: 3.451

2023-05-27

Metals and Materials International

Abstract:Metal Additive Manufacturing (MAM) produces high-strength and complex shape components through a layer-by-layer metal deposition approach for aerospace, automobile, and structural applications. The heat is accumulated and subjected to reheating in the metal layers by depositing material from the feedstock with the help of a heat source on the existing metal layer. Generally, the reheating in the MAM process consists of multiple annealing, multilevel normalizing, and long tempering processes. The material morphology and mechanical properties of MAM products are affected due to the stored heat in the layers while the component is manufactured with the heat source of laser energy, electron energy, or conventional arc welding techniques. The grain structure is refined by reheating the layers by the heat source and without post-heat treatment techniques. The mechanical properties and morphological characteristics of the as-built MAM components due to the effect of in-situ intrinsic heat treatment (reheating) are measured through various materials testing methods such as Electron Back Scatter Diffraction (EBSD), Scanning electron microscopy (SEM), X-ray diffraction (XRD), tensile test, hardness test, compressive test and etc. The review aims to study the mechanical and morphological characteristics due to the effect of in-situ intrinsic heat treatments on low carbon steel, maraging steel, and Al alloys, which were fabricated by direct energy deposition (DED) and laser powder bed fusion (LPBF) techniques. Graphical

materials science, multidisciplinary,metallurgy & metallurgical engineering
Current progress of research on heat-resistant Mg alloys: A review

Hong Yang,Wenlong Xie,Jiangfeng Song,Zhihua Dong,Yuyang Gao,Bin Jiang,Fusheng Pan

DOI: https://doi.org/10.1007/s12613-023-2802-7

2024-05-28

International Journal of Minerals Metallurgy and Materials

Abstract:With the increasing attention received by lightweight metals, numerous essential fields have increased requirements for magnesium (Mg) alloys with good room-temperature and high-temperature mechanical properties. However, the high-temperature mechanical properties of commonly used commercial Mg alloys, such as AZ91D, deteriorate considerably with increasing temperatures. Over the past several decades, extensive efforts have been devoted to developing heat-resistant Mg alloys. These approaches either inhibit the generation of thermally unstable phases or promote the formation of thermally stable precipitates/phases in matrices through solid solution or precipitation strengthening. In this review, numerous studies are systematically introduced and discussed. Different alloy systems, including those based on Mg–Al, Mg–Zn, and Mg–rare earth, are carefully classified and compared to reveal their mechanical properties and strengthening mechanisms. The emphasis, limitations, and future prospects of these heat-resistant Mg alloys are also pointed out and discussed to develop heat-resistant Mg alloys and broaden their potential application areas in the future.

materials science, multidisciplinary,metallurgy & metallurgical engineering,mining & mineral processing
Effects of different heat treatment temperatures on the microstructure and mechanical properties of additive manufacturing Ti65 alloys

Junfeng Sun,Haifei Lu,Yuchen Liang,Kaiyu Luo,Jinzhong Lu

DOI: https://doi.org/10.1016/j.matchar.2024.114592

IF: 4.537

2024-12-05

Materials Characterization

Abstract:The advantages of additive manufacturing integrated molding have increased its use in aerospace applications. Heat treatment is crucial in changing the microstructure and improving the mechanical properties of additively manufactured samples. Herein, the effects of different heat treatment temperatures (750 °C - 1050 °C) on the microstructure and mechanical properties of additive manufacturing Ti65 alloys were systematically investigated. Concretely, the heat treatment in different temperature ranges led to significant variation in microstructure. HT-1050 specimens with widmanstatten microstructure exhibited high microhardness (415 HV), lowest wear rate (2.19 × 10 3 mm 3 /N × min), and superior frictional wear resistance. A detailed examination of the worn surfaces, considering the variations in the applied load, indicated that the predominant wear mechanisms during the sliding process were abrasion, delamination, oxidation, and adhesion. The as-deposited specimens' tensile strength and total elongation were 1115 ± 10 MPa and 2.1 ± 0.6 %, respectively. The elongation of the specimens increased significantly after heat treatment. The total elongation of the HT-1050 increased by 116 % compared to the as-deposited and had favorable strength-plasticity. This work elucidates the fundamental mechanisms underlying the effects of heat treatment on the microstructure and mechanical properties of alloys.

materials science, multidisciplinary,metallurgy & metallurgical engineering, characterization & testing
Research progress on microstructure tuning of heat-resistant cast aluminum alloys

Jiaming Li,Zhiqi Wang,Junyuan Bai,Hao Xue,Ni Tian,Zhihao Zhao,Gaowu Qin

DOI: https://doi.org/10.1007/s10853-024-09538-z

IF: 4.5

2024-03-21

Journal of Materials Science

Abstract:With development of present energy-saving society, lightweight and green development in the automotive and aerospace industries have put forward urgent demands for heat-resistant cast aluminum alloys. Present cast aluminum alloys are of lightweight and have excellent mechanical properties when serving in ambient environment. However, when serving at temperatures of 200–300 °C or even higher, the alloys inevitably soften and the high-temperature mechanical properties decline rapidly, hardly meeting the requirements for high-performance equipments. This paper summarizes the development process of classic heat-resistant aluminum alloys, especially the microstructural characteristics of heat-resistant cast aluminum alloys in the past decade, and reviews the current microstructure tuning strategies of heat-resistant aluminum alloys from the aspects of intrinsic heat resistance of the second phases, phase interface modification, diffusion-controlled phase transition, grain boundary stabilization and composite material design. Finally, we propose the prospects for the future development of heat-resistant aluminum alloys.

materials science, multidisciplinary
Advancements and Perspectives in Additive Manufacturing of Tungsten Alloys and Composites: Challenges and Solutions

Mehrdad Zarinejad,Yunxiang Tong,Mojtaba Salehi,Chengfa Mu,Nian Wang,Yonglong Xu,Sajjad Rimaz,Lintao Tian,Kai Xiang Kuah,Xiaotong Chen

DOI: https://doi.org/10.3390/cryst14070665

IF: 2.7

2024-07-21

Crystals

Abstract:This review explores additive manufacturing (AM) for refractory tungsten (W) and its alloys, highlighting the primary challenges and determining factors in the AM of pure W, W alloys and composites. The challenges mainly arise from W's high melting point, low laser absorptivity, high thermal conductivity, high melt viscosity, high oxygen affinity, high ductile-to-brittle transition temperature, and inherent embrittlement, which lead to defects and anomalies in AM-produced parts. This review focuses on both processes and alloying strategies to address the issues related to densification, micro-cracking, and the resultant properties in W-based components. Cracking in additively manufactured W remains a persistent issue due to thermal stress, embrittlement, and oxide formation. Powder characteristics, process parameters, and thermal management strategies are crucial for W densification. Throughout the review, existing knowledge and insights are organized into comprehensive tables, serving as valuable resources for researchers delving deeper into this topic. Future research in W-AM should focus on understanding the interaction between AM process parameters and microstructural and material design. Advances in atomic-level understanding, thermodynamic modeling, and data analytics have the potential to significantly enhance the precision, sustainability, and applicability of W-AM.

materials science, multidisciplinary,crystallography
Heat-resistant aluminium alloys

Amit Shyam,Sumit Bahl

DOI: https://doi.org/10.1038/s41563-022-01436-6

IF: 41.2

2022-12-20

Nature Materials

Abstract:Scandium added to Al–Cu–Mg–Ag alloys leads to an in situ phase transformation of coherent Cu-rich nanoprecipitates at elevated temperature, with Sc atoms diffusing and occupying their interstitial sites. The transformed nanoprecipitates have enhanced thermal stability while maintaining a large volume fraction and these two microstructural features enable high tensile strength of the Al alloy with creep resistance up to 400 °C.

materials science, multidisciplinary,chemistry, physical,physics, applied, condensed matter

Heat‐Resistant Intermetallic Compounds and Ceramic Dispersion Alloys for Additive Manufacturing: A Review

Additive manufacturing of heat-resistant aluminum alloys: A review

Additive manufacturing of high-entropy alloy composites: A review

Research development of heat-resistant aluminium alloys

A Review of Emerging Metallic System for High-Energy Beam Additive Manufacturing: Al–Co–Cr–Fe–Ni High Entropy Alloys

Thermal stability of Ni-based superalloys fabricated through additive manufacturing: A review

Additive Manufacturing of High-Entropy Alloys: A Review

An additively manufactured heat-resistant Al-Ce-Sc-Zr alloy: Microstructure, mechanical properties and thermal stability

Progress in Additive Manufacturing of High-Entropy Alloys

Heat-resistant Al alloys: microstructural design and microalloying effect

A new high-throughput method using additive manufacturing for alloy design and heat treatment optimization

Advancements and future prospects of additive manufacturing in high-entropy alloy applications

Microstructure and Properties of Novel Heat Resistant Al–Ce–Cu Alloy for Additive Manufacturing

High-throughput Alloy and Process Design for Metal Additive Manufacturing

Heat treatment for metal additive manufacturing

Effect of in-Situ Intrinsic Heat Treatment in Metal Additive Manufacturing: A Comprehensive Review

Current progress of research on heat-resistant Mg alloys: A review

Effects of different heat treatment temperatures on the microstructure and mechanical properties of additive manufacturing Ti65 alloys

Research progress on microstructure tuning of heat-resistant cast aluminum alloys

Advancements and Perspectives in Additive Manufacturing of Tungsten Alloys and Composites: Challenges and Solutions

Heat-resistant aluminium alloys