A Bi‐Layer Hydrogel Cardiac Patch Made of Recombinant Functional Proteins

Xiaoyu Jiang,Teng Feng,Bolin An,Susu Ren,Jufeng Meng,Ke Li,Suying Liu,Haiying Wu,Hui Zhang,Chao Zhong

DOI: https://doi.org/10.1002/adma.202201411

IF: 29.4

2022-04-03

Advanced Materials

Abstract:Advanced Materials, Accepted Article.

materials science, multidisciplinary,chemistry, physical,physics, applied, condensed matter,nanoscience & nanotechnology

What problem does this paper attempt to address?

Paintable and Rapidly Bondable Conductive Hydrogels As Therapeutic Cardiac Patches

Shuang Liang,Yinyu Zhang,Hongbo Wang,Ziyang Xu,Jingrui Chen,Rui Bao,Baoyu Tan,Yuanlu Cui,Guanwei Fan,Wenxin Wang,Wei Wang,Wenguang Liu

DOI: https://doi.org/10.1002/adma.201704235

IF: 29.4

2018-01-01

Advanced Materials

Abstract:In recent years, cardiac patches have been developed for the treatment of myocardial infarction. However, the fixation approaches onto the tissue through suture or phototriggered reaction inevitably cause new tissue damage. Herein, a paintable hydrogel is constructed based on Fe3+-triggered simultaneous polymerization of covalently linked pyrrole and dopamine in the hyperbranched chains where the in situ formed conductive polypyrrole also uniquely serves to crosslink network. This conductive and adhesive hydrogel can be conveniently painted as a patch onto the heart surface without adverse liquid leakage. The functional patch whose conductivity is equivalent to that of normal myocardium is strongly bonded to the beating heart within 4 weeks, accordingly efficiently boosting the transmission of electrophysiological signals. Eventually, the reconstruction of cardiac function and revascularization of the infarct myocardium are remarkably improved. The translatable suture-free strategy reported in this work is promising to address the human clinical challenges in cardiac tissue engineering.
Cardiac-adaptive conductive hydrogel patch enabling construction of mechanical-electrical anisotropic microenvironment for heart repair

Xiaoping Song,Jifeng Zhang,Si Shen,Dan Liu,Jie Zhang,Wenming Yin,Genlan Ye,Leyu Wang,Liu Cai,Honghao Hou,Xiaozhong Qiu

DOI: https://doi.org/10.34133/research.0161

IF: 11

2023-05-15

Research

Abstract:The biomimetic construction of a microstructural-mechanical-electrical anisotropic microenvironment adaptive to the native cardiac tissue is essential to repair myocardial infarction (MI). Inspired by the 3D anisotropic characteristic of the natural fish swim bladder (FSB), a novel flexible, anisotropic, and conductive hydrogel was developed for tissue-specific adaptation to the anisotropic structural, conductive, and mechanical features of the native cardiac extracellular matrix. The results revealed that the originally stiff, homogeneous FSB film was tailored to a highly flexible anisotropic hydrogel, enabling its potential as a functional engineered cardiac patch (ECP). In vitro and in vivo experiments demonstrated the enhanced electrophysiological activity, maturation, elongation, and orientation of cardiomyocytes (CMs), and marked MI repair performance with reduced CM apoptosis and myocardial fibrosis, thereby promoting cell retention, myogenesis, and vascularization, as well as improving electrical integration. Our findings offer a potential strategy for functional ECP and provides a novel strategy to bionically simulate the complex cardiac repair environment.

multidisciplinary sciences
Materials and Design Approaches for a Fully Bioresorbable, Electrically Conductive and Mechanically Compliant Cardiac Patch Technology (Adv. Sci. 27/2023)

Hanjun Ryu,Xinlong Wang,Zhaoqian Xie,Jihye Kim,Yugang Liu,Wubin Bai,Zhen Song,Joseph W. Song,Zichen Zhao,Joohee Kim,Quansan Yang,Janice Jie Xie,Rebecca Keate,Huifeng Wang,Yonggang Huang,Igor R. Efimov,Guillermo Antonio Ameer,John A. Rogers

DOI: https://doi.org/10.1002/advs.202370187

IF: 15.1

2023-09-27

Advanced Science

Abstract:Bioresorbable Cardiac Patch Bioresorbable materials have great potential in implantable and temporal biomedical devices. In article number 2303429, Guillermo Antonio Ameer, John A. Rogers, and co‐workers demonstrate a highly conductive and elastic bioresorbable cardiac patch to treat myocardial infarction and other cardiac disorders. Studies by in vitro, and ex vivo models show regular and synchronous contraction of cardiomyocytes on the cardiac patch, biocompatibility, and reconstruction of the conductive pathways.

materials science, multidisciplinary,nanoscience & nanotechnology,chemistry
A Multifunctional Anisotropic Patch Manufactured by Microfluidic Manipulation for the Repair of Infarcted Myocardium

Xiaomeng Jia,Weiyu Liu,Yongjian Ai,Suet Cheung,Wanting Hu,Yu Wang,Xiaolu Shi,Jin Zhou,Zhuang Zhang,Qionglin Liang

DOI: https://doi.org/10.1002/adma.202404071

Abstract:Engineered hydrogel patches have shown promising therapeutic effects in the treatment of myocardial infarction (MI), especially anisotropic patches that mimic the characteristics of native myocardium have attracted widespread attention. However, it remains a great challenge to develop cardiac patches with long-range and orderly electrical conduction based on an effective, mild, and rapid strategy. Here, a multifunctional anisotropic cardiac patch is presented based on microfluidic manipulation. The anisotropic alginate-gelatin methacrylate hydrogel patches are easily and rapidly prepared through microfluidic focusing, ion-photocrosslinking, and parallel packing processes. The fluid-based anisotropic realization process does not involve complex machining and strong field stimulation and is compatible with the loading of macromolecular biological agents. The anisotropic hydrogel patch can mimic the anisotropy of the myocardium and guide the directional polarization of cardiomyocytes. In animal model experiments, it also exhibits significant effects in inhibiting ventricular remodeling, fibrosis, and enhancing cardiac function recovery after MI. These comprehensive features make the multifunctional hydrogel patch a promising candidate for cardiac tissue repair and future provide a new paradigm for expanding microfluidic technology to solve tissue engineering challenges.
Novel Biomimetic Sandwich-Structured Electrospun Cardiac Patches with Moderate Adhesiveness and Excellent Electrical Conductivity

Jing Liu,Yinyang Shen,Kaikai Duan,Xiangming He,Ruoyu Wang,Yeping Chen,Ruoyu Li,Jialu Sun,Xiaoyi Qiu,Tao Chen,Jie Wang,Hui Wang

DOI: https://doi.org/10.1016/j.jmbbm.2024.106828

IF: 4.042

2024-01-01

Journal of the Mechanical Behavior of Biomedical Materials

Abstract:Clinical cardiac patches exhibit unsatisfied biocompatibility, low adhesion, and inadequate compliance and suboptimal mechanical properties for cardiac disorders repair. To address these challenges, herein we have innovatively proposed a biomimetic nanofiber electrospun membrane with a sandwich structure strategy. The composite patch comprises a stretchable polyurethane (PU) as basic material, then infiltrated with biocompatible silk fibroin methacryloyl (Silk-MA) as the middle layer via electrospinning and finally covered with Bio-ILs (chemically modified biocompatible ionic liquids) to impart electrical conductivity. Results indicated that the incorporation of Bio-ILs significantly enhances the conductivity reaching 2877 mS/m; particularly due to the positive charges of Bio-ILs, the composite film exhibits mild adhesive properties, inducing minimal damage to the substrate tissue. Furthermore, the basic PU of bilayer nanofiber membrane increased the film's stretching strain to approximately 250%, the Silk-MA hydrogel coating changed the film from hydrophobic to hydrophilic, creating a favorable and biocompatible microenvironment. Finally, in vitro experiments on cardiomyocytes confirmed that the material exhibits low cytotoxicity and excellent biocompatibility. Overall, the biomimetic sandwich electrospun membrane could restore electrical conduction and synchronized contraction function, providing a promising strategy for the treatment of cardiac tissue engineering.
Materials and Design Approaches for a Fully Bioresorbable, Electrically Conductive and Mechanically Compliant Cardiac Patch Technology

Hanjun Ryu,Xinlong Wang,Zhaoqian Xie,Jihye Kim,Yugang Liu,Wubin Bai,Zhen Song,Joseph W. Song,Zichen Zhao,Joohee Kim,Quansan Yang,Janice Jie Xie,Rebecca Keate,Huifeng Wang,Yonggang Huang,Igor R. Efimov,Guillermo Antonio Ameer,John A. Rogers

DOI: https://doi.org/10.1002/advs.202303429

IF: 15.1

2023-08-01

Advanced Science

Abstract:A bioresorbable, highly conductive, and elastic cardiac patch (BCEP) designed as a heterogeneous material structure for myocardial infarction treatment. Finite element analysis defines geometries of filamentary serpentine mesh architectures in a bioresorbable metal for optimized elastic properties when integrated with a bioresorbable elastomer. Human‐induced pluripotent‐stem‐cell‐derived cardiomyocytes grown on the BCEP demonstrate regular and synchronous contractions. Ex vivo studies highlight the ability of the BECP to form electroconductive pathways for transmitting the bioelectrical signals. Myocardial infarction (MI) is one of the leading causes of death and disability. Recently developed cardiac patches provide mechanical support and additional conductive paths to promote electrical signal propagation in the MI area to synchronize cardiac excitation and contraction. Cardiac patches based on conductive polymers offer attractive features; however, the modest levels of elasticity and high impedance interfaces limit their mechanical and electrical performance. These structures also operate as permanent implants, even in cases where their utility is limited to the healing period of tissue damaged by the MI. The work presented here introduces a highly conductive cardiac patch that combines bioresorbable metals and polymers together in a hybrid material structure configured in a thin serpentine geometry that yields elastic mechanical properties. Finite element analysis guides optimized choices of layouts in these systems. Regular and synchronous contraction of human induced pluripotent stem cell‐derived cardiomyocytes on the cardiac patch and ex vivo studies offer insights into the essential properties and the bio‐interface. These results provide additional options in the design of cardiac patches to treat MI and other cardiac disorders.

materials science, multidisciplinary,nanoscience & nanotechnology,chemistry
Functional Engineered Human Cardiac Patches Prepared from Nature's Platform Improve Heart Function after Acute Myocardial Infarction.

Qingjie Wang,Hui Yang,Aobing Bai,Wei Jiang,Xiuya Li,Xinhong Wang,Yishen Mao,Chao Lu,Ruizhe Qian,Feng Guo,Tianling Ding,Haiyan Chen,Sifeng Chen,Jianyi Zhang,Chen Liu,Ning Sun

DOI: https://doi.org/10.1016/j.biomaterials.2016.07.035

IF: 14

2016-01-01

Biomaterials

Abstract:With the advent of induced pluripotent stem cells and directed differentiation techniques, it is now feasible to derive individual-specific cardiac cells for human heart tissue engineering. Here we report the generation of functional engineered human cardiac patches using human induced pluripotent stem cells-derived cardiac cells and decellularized natural heart ECM as scaffolds. The engineered human cardiac patches can be tailored to any desired size and shape and exhibited normal contractile and electrical physiology in vitro. Further, when patching on the infarct area, these patches improved heart function of rats with acute myocardial infarction in vivo. These engineered human cardiac patches can be of great value for normal and disease-specific heart tissue engineering, drug screening, and meet the demands for individual-specific heart tissues for personalized regenerative therapy of myocardial damages in the future.
A Self-Association Cross-Linked conductive zwitterionic hydrogel as a myocardial patch for restoring cardiac function

Xiaofang Hu,Peng Zhang,Jianing Liu,Haien Guan,Ruihong Xie,Liu Cai,Jiasong Guo,Leyu Wang,Ye Tian,Xiaozhong Qiu

DOI: https://doi.org/10.1016/j.cej.2022.136988

IF: 15.1

2022-10-15

Chemical Engineering Journal

Abstract:In recent years, engineered cardiac patch (ECP) with electrical conductivity has been developed for cardiac repair after injury or infarction. However, the application of traditional conductive polymers in ECP is still limited due to their toxicity and difficulty in dispersing and degradation. Herein, a self-association crosslinked conductive zwitterionic hydrogel was developed by simple copolymerization of zwitterionic monomer carboxybetaine methacrylate (CBMA) and a biocompatible monomer hydroxyethyl methacrylate (HEMA). The fabricated p(CBMA-co-HEMA) hydrogel possessed excellent ionic conductivity, suitable compressive and stretchable properties, self-healing and mechanical sensory capability. In vitro, the zwitterionic hydrogel significantly enhanced the functionalization of the cardiomyocytes, resulting in excellent synchronous contraction by increasing the expression of cardiac-related factor α-actinin and transmission electrical signal-relevant Connexin-43 (CX-43). In vivo, the hydrogel-derived functional patch effectively promoted the transmission of electrophysiological signals, improved revascularization in infarcted area and then remarkably restored the cardiac function. These data indicated that our developed conductive zwitterionic hydrogel has good promise in repairing myocardial tissue injury.

engineering, chemical, environmental
An Intrapericardial Injectable Hydrogel Patch for Mechanical-Electrical Coupling with Infarcted Myocardium

Chaojie Yu,Zhiwei Yue,Mingyue Shi,Lijie Jiang,Shuang Chen,Mengmeng Yao,Qingyu Yu,Xiaojun Wu,Hong Zhang,Fanglian Yao,Changyong Wang,Hong Sun,Junjie Li

DOI: https://doi.org/10.1021/acsnano.2c05168

IF: 17.1

2022-10-05

ACS Nano

Abstract:Although hydrogel-based patches have shown promising therapeutic efficacy in myocardial infarction (MI), synergistic mechanical, electrical, and biological cues are required to restore cardiac electrical conduction and diastolic-systolic function. Here, an injectable mechanical-electrical coupling hydrogel patch (MEHP) is developed via dynamic covalent/noncovalent cross-linking, appropriate for cell encapsulation and minimally invasive implantation into the pericardial cavity. Pericardial...

materials science, multidisciplinary,chemistry, physical,nanoscience & nanotechnology
A Bioprinted Cardiac Patch Composed of Cardiac‐Specific Extracellular Matrix and Progenitor Cells for Heart Repair

Donald Bejleri,Benjamin W. Streeter,Aline L. Y. Nachlas,Milton E. Brown,Roberto Gaetani,Karen L. Christman,Michael E. Davis

DOI: https://doi.org/10.1002/adhm.201800672

IF: 10

2018-10-31

Advanced Healthcare Materials

Abstract:Congenital heart defects are present in 8 of 1000 newborns and palliative surgical therapy has increased survival. Despite improved outcomes, many children develop reduced cardiac function and heart failure requiring transplantation. Human cardiac progenitor cell (hCPC) therapy has potential to repair the pediatric myocardium through release of reparative factors, but therapy suffers from limited hCPC retention and functionality. Decellularized cardiac extracellular matrix hydrogel (cECM) improves heart function in animals, and human trials are ongoing. In the present study, a 3D-bioprinted patch containing cECM for delivery of pediatric hCPCs is developed. Cardiac patches are printed with bioinks composed of cECM, hCPCs, and gelatin methacrylate (GelMA). GelMA-cECM bioinks print uniformly with a homogeneous distribution of cECM and hCPCs. hCPCs maintain >75% viability and incorporation of cECM within patches results in a 30-fold increase in cardiogenic gene expression of hCPCs compared to hCPCs grown in pure GelMA patches. Conditioned media from GelMA-cECM patches show increased angiogenic potential (>2-fold) over GelMA alone, as seen by improved endothelial cell tube formation. Finally, patches are retained on rat hearts and show vascularization over 14 d in vivo. This work shows the successful bioprinting and implementation of cECM-hCPC patches for potential use in repairing damaged myocardium.

nanoscience & nanotechnology,engineering, biomedical,materials science, biomaterials
Stretchable and Anisotropic Conductive Composite Hydrogel As Therapeutic Cardiac Patches

Chenlong Wang,Yi Chai,Xiaodong Wen,Yongjian Ai,He Zhao,Wanting Hu,Xiaoping Yang,Ming-Yu Ding,Xiaolu Shi,Qingfei Liu,Qionglin Liang

DOI: https://doi.org/10.1021/acsmaterialslett.1c00146

IF: 11.4

2021-01-01

ACS Materials Letters

Abstract:Fabricating concurrently stretchable and conductive hydrogel scaffold is highly desired in the development of myocardial tissue engineering, and also very challenging especially with the anisotropic conductive properties. Existing anisotropic-strategies are limited to specific nanomaterials, or time-consuming. Here, we present a simple and new stretch-induced strategy to make conductive nanotubes aligned in the hydrogel. With this strategy, we fabricated a new type of hybrid hydrogel that possesses excellent stretchability while enabling outstanding anisotropic conductivity (6 vs 30 S/cm). Hybrid hydrogels are also successfully applied as a therapeutic cardiac patch which induces an elongated cell morphology of cultured cardiomyocytes and enables a stable directional transmission of electric signals. This patch gave successful mitigation of myocardium infarction in rats. It is believed that this strategy, and this nanocomposite hydrogel have a promising application in tissue engineering.
Electroconductive cardiac patch based on bioactive PEDOT:PSS hydrogels

Erwan Sauvage,Justin Matta,Cat‐Thy Dang,Jiaxin Fan,Graziele Cruzado,Fabio Cicoira,Géraldine Merle

DOI: https://doi.org/10.1002/jbm.a.37729

2024-05-02

Journal of Biomedical Materials Research Part A

Abstract:Engineering cardiac implants for treating myocardial infarction (MI) has advanced, but challenges persist in mimicking the structural properties and variability of cardiac tissues using traditional bioconstructs and conventional engineering methods. This study introduces a synthetic patch with a bioactive surface designed to swiftly restore functionality to the damaged myocardium. The patch combines a composite, soft, and conductive hydrogel‐based on (3,4‐ethylenedioxythiophene):polystyrene‐sulfonate (PEDOT:PSS) and polyvinyl alcohol (PVA). This cardiac patch exhibits a reasonably high electrical conductivity (40 S/cm) and a stretchability up to 50% of its original length. Our findings reveal its resilience to 10% cyclic stretching at 1 Hz with no loss of conductivity over time. To mediate a strong cell–scaffold adhesion, we biofunctionalize the hydrogel with a N‐cadherin mimic peptide, providing the cardiac patch with a bioactive surface. This modification promote increased adherence and proliferation of cardiac fibroblasts (CFbs) while effectively mitigating the formation of bacterial biofilm, particularly against Staphylococcus aureus, a common pathogen responsible for surgical site infections (SSIs). Our study demonstrates the successful development of a structurally validated cardiac patch possessing the desired mechanical, electrical, and biofunctional attributes for effective cardiac recovery. Consequently, this research holds significant promise in alleviating the burden imposed by myocardial infarctions.

engineering, biomedical,materials science, biomaterials
Dough‐Kneading‐Inspired Design of an Adhesive Cardiac Patch to Attenuate Cardiac Fibrosis and Improve Cardiac Function via Regulating Glycometabolism

Yage Sun,Xiaoping Zhang,Xiongfeng Nie,Rong Yang,Xinrui Zhao,Chunyan Cui,Wenguang Liu

DOI: https://doi.org/10.1002/adhm.202303685

IF: 10

2024-02-23

Advanced Healthcare Materials

Abstract:Recently, hydrogel adhesive patches have been explored for treating myocardial infarction. However, to achieve secure adhesion onto the wet beating heart and local regulation of pathological microenvironment remains challenging. Herein, a dough‐kneading‐inspired design of hydrogel adhesive cardiac patch is reported, aiming to improve the strength of prevalent powder‐formed patch and retain wet adhesion. In mimicking the polysaccharide and protein components of natural flour, methacrylated polyglutamic acid (PGAMA) is electrostatically interacted with hydroxypropyl chitosan (HPCS) to form PGAMA/HPCS coacervate hydrogel. The PGAMA/HPCS hydrogel is freeze‐dried and ground into powders, which are further rehydrated with two aqueous solutions of functional drug, 3‐acrylamido phenylboronic acid (APBA)/rutin (Rt) complexes for protecting the myocardium from advanced glycation end product injury by reactive oxygen species (ROS)‐responsive rutin release, and hypoxanthine‐loaded methacrylated hyaluronic acid (HAMA) nanogels for enhancing macrophage targeting ability to regulate glycometabolism for combating inflammation. The rehydrated powders bearing APBA/Rt complexes and HAMA‐hypoxanthine nanogels are repeatedly kneaded into a dough‐like gel, which is further subjected to thermal initiated crosslinking to form a stabilized and sticky patch. This biofunctional patch is applied onto the rats' infarcted myocardium and the outcomes at 28 days post‐surgery indicate efficient restoration of cardiac functions and attenuation of cardiac fibrosis. This article is protected by copyright. All rights reserved

nanoscience & nanotechnology,engineering, biomedical,materials science, biomaterials
Chronological adhesive cardiac patch for synchronous mechanophysiological monitoring and electrocoupling therapy

Chaojie Yu,Mingyue Shi,Shaoshuai He,Mengmeng Yao,Hong Sun,Zhiwei Yue,Yuwei Qiu,Baijun Liu,Lei Liang,Zhongming Zhao,Fanglian Yao,Hong Zhang,Junjie Li

DOI: https://doi.org/10.1038/s41467-023-42008-9

IF: 16.6

2023-10-06

Nature Communications

Abstract:Abstract With advances in tissue engineering and bioelectronics, flexible electronic hydrogels that allow conformal tissue integration, online precision diagnosis, and simultaneous tissue regeneration are expected to be the next-generation platform for the treatment of myocardial infarction. Here, we report a functionalized polyaniline-based chronological adhesive hydrogel patch (CAHP) that achieves spatiotemporally selective and conformal embedded integration with a moist and dynamic epicardium surface. Significantly, CAHP has high adhesion toughness, rapid self-healing ability, and enhanced electrochemical performance, facilitating sensitive sensing of cardiac mechanophysiology-mediated microdeformations and simultaneous improvement of myocardial fibrosis-induced electrophysiology. As a result, the flexible CAHP platform monitors diastolic-systolic amplitude and rhythm in the infarcted myocardium online while effectively inhibiting ventricular remodeling, promoting vascular regeneration, and improving electrophysiological function through electrocoupling therapy. Therefore, this diagnostic and therapeutic integration provides a promising monitorable treatment protocol for cardiac disease.

multidisciplinary sciences
Flexible Conductive Decellularized Fish Skin Matrix as a Functional Scaffold for Myocardial Infarction Repair

Zhanhong Fang,Bingyang Lv,Jiamian Zhan,Xianglong Xing,Chengbin Ding,Jianing Liu,Leyu Wang,Xiaoming Zou,Xiaozhong Qiu

DOI: https://doi.org/10.1002/mabi.202300207

Abstract:Engineering cardiac patches are proven to be effective in myocardial infarction (MI) repair, but it is still a tricky problem in tissue engineering to construct a scaffold with good biocompatibility, suitable mechanical properties, and solid structure. Herein, decellularized fish skin matrix is utilized with good biocompatibility to prepare a flexible conductive cardiac patch through polymerization of polydopamine (PDA) and polypyrrole (PPy). Compared with single modification, the double modification strategy facilitated the efficiency of pyrrole polymerization, so that the patch conductivity is improved. According to the results of experiments in vivo and in vitro, the scaffold can promote the maturation and functionalization of cardiomyocytes (CMs). It can also reduce the inflammatory response, increase local microcirculation, and reconstruct the conductive microenvironment in infarcted myocardia, thus improving the cardiac function of MI rats. In addition, the excellent flexibility of the scaffold, which enables it to be implanted in vivo through "folding-delivering-re-stretehing" pathway, provides the possibility of microoperation under endoscope, which avoids the secondary damage to myocardium by traditional thoracotomy for implantation surgery.
Three-Dimensionally Printed Hydrogel Cardiac Patch for Infarct Regeneration Based on Natural Polysaccharides

Jorge Loureiro,Sónia P. Miguel,Victor Galván-Chacón,David Patrocinio,José Blas Pagador,Francisco M. Sánchez-Margallo,Maximiano P. Ribeiro,Paula Coutinho

DOI: https://doi.org/10.3390/polym15132824

IF: 5

2023-06-28

Polymers

Abstract:Myocardial infarction is one of the more common cardiovascular diseases, and remains the leading cause of death, globally. Hydrogels (namely, those using natural polymers) provide a reliable tool for regenerative medicine and have become a promising option for cardiac tissue regeneration due to their hydrophilic character and their structural similarity to the extracellular matrix. Herein, a functional ink based on the natural polysaccharides Gellan gum and Konjac glucomannan has, for the first time, been applied in the production of a 3D printed hydrogel with therapeutic potential, with the goal of being locally implanted in the infarcted area of the heart. Overall, results revealed the excellent printability of the bioink for the development of a stable, porous, biocompatible, and bioactive 3D hydrogel, combining the specific advantages of Gellan gum and Konjac glucomannan with proper mechanical properties, which supports the simplification of the implantation process. In addition, the structure have positive effects on endothelial cells' proliferation and migration that can promote the repair of injured cardiac tissue. The results presented will pave the way for simple, low-cost, and efficient cardiac tissue regeneration using a 3D printed hydrogel cardiac patch with potential for clinical application for myocardial infarction treatment in the near future.

polymer science
A Conductive and Adhesive Hydrogel Composed of MXene Nanoflakes as a Paintable Cardiac Patch for Infarcted Heart Repair.

Jae Young Lee,Youngkeun Ahn,Sang‐Hyeob Lee,B. Kang,Yong Sook Kim,Min Chul Kim,Yoon Chul Shin,Junggeon Park,M. Lee,Goeun Choe,Ju Hee Jun

DOI: https://doi.org/10.1021/acsnano.3c00933

IF: 17.1

2023-06-20

ACS Nano

Abstract:Myocardial infarction (MI) is a major cause of death worldwide. After the occurrence of MI, the heart frequently undergoes serious pathological remodeling, leading to excessive dilation, electrical disconnection between cardiac cells, and fatal functional damage. Hence, extensive efforts have been made to suppress pathological remodeling and promote the repair of the infarcted heart. In this study, we developed a hydrogel cardiac patch that can provide mechanical support, electrical conduction, and tissue adhesiveness to aid in the recovery of an infarcted heart function. Specifically, we developed a conductive and adhesive hydrogel (CAH) by combining the two-dimensional titanium carbide (Ti3C2Tx) MXene with natural biocompatible polymers [i.e., gelatin and dextran aldehyde (dex-ald)]. The CAH was formed within 250 s of mixing the precursor solution and could be painted. The hydrogel containing 3.0 mg/mL MXene, 10% gelatin, and 5% dex-ald exhibited appropriate material characteristics for cardiac patch applications, including a uniform distribution of MXene, a high electrical conductivity (18.3 mS/cm), cardiac tissue-like elasticity (30.4 kPa), strong tissue adhesion (6.8 kPa), and resistance to various mechanical deformations. The CAH was cytocompatible and induced cardiomyocyte (CM) maturation in vitro, as indicated by the upregulation of connexin 43 expression and a faster beating rate. Furthermore, CAH could be painted onto the heart tissue and remained stably adhered to the beating epicardium. In vivo animal studies revealed that CAH cardiac patch treatment significantly improved cardiac function and alleviated the pathological remodeling of an infarcted heart. Thus, we believe that our MXene-based CAH can potentially serve as a promising platform for the effective repair of various electroactive tissues including the heart, muscle, and nerve tissues.

Engineering,Medicine,Materials Science
An Off-the-shelf Artificial Cardiac Patch Improves Cardiac Repair after Myocardial Infarction in Rats and Pigs

Ke Huang,Emily W. Ozpinar,Teng Su,Junnan Tang,Deliang Shen,Li Qiao,Shiqi Hu,Zhenhua Li,Hongxia Liang,Kyle Mathews,Valery Scharf,Donald O. Freytes,Ke Cheng

DOI: https://doi.org/10.1126/scitranslmed.aat9683

IF: 17.1

2020-01-01

Science Translational Medicine

Abstract:Cell therapy has been a promising strategy for cardiac repair after injury or infarction; however, low retention and engraftment of transplanted cells limit potential therapeutic efficacy. Seeding scaffold material with cells to create cardiac patches that are transplanted onto the surface of the heart can overcome these limitations. However, because patches need to be freshly prepared to maintain cell viability, long-term storage is not feasible and limits clinical applicability. Here, we developed an off-the-shelf therapeutic cardiac patch composed of a decellularized porcine myocardial extracellular matrix scaffold and synthetic cardiac stromal cells (synCSCs) generated by encapsulating secreted factors from isolated human cardiac stromal cells. This fully acellular artificial cardiac patch (artCP) maintained its potency after long-term cryopreservation. In a rat model of acute myocardial infarction, transplantation of the artCP supported cardiac recovery by reducing scarring, promoting angiomyogenesis, and boosting cardiac function. The safety and efficacy of the artCP were further confirmed in a porcine model of myocardial infarction. The artCP is a clinically feasible, easy-to-store, and cell-free alternative to myocardial repair using cell-based cardiac patches.
4D physiologically adaptable cardiac patch: A 4-month in vivo study for the treatment of myocardial infarction

Haitao Cui,Chengyu Liu,Timothy Esworthy,Yimin Huang,Zu-Xi Yu,Xuan Zhou,Hong San,Se-Jun Lee,Sung Yun Hann,Manfred Boehm,Muhammad Mohiuddin,John P Fisher,Lijie Grace Zhang

DOI: https://doi.org/10.1126/sciadv.abb5067

2020-06-24

Abstract:There has been considerable progress in engineering cardiac scaffolds for the treatment of myocardial infarction (MI). However, it is still challenging to replicate the structural specificity and variability of cardiac tissues using traditional bioengineering approaches. In this study, a four-dimensional (4D) cardiac patch with physiological adaptability has been printed by beam-scanning stereolithography. By combining a unique 4D self-morphing capacity with expandable microstructure, the specific design has been shown to improve both the biomechanical properties of the patches themselves and the dynamic integration of the patch with the beating heart. Our results demonstrate improved vascularization and cardiomyocyte maturation in vitro under physiologically relevant mechanical stimulation, as well as increased cell engraftment and vascular supply in a murine chronic MI model. This work not only potentially provides an effective treatment method for MI but also contributes a cutting-edge methodology to enhance the structural design of complex tissues for organ regeneration.
Multifunctional 3D‐Printed Patches for Long‐Term Drug Release Therapies after Myocardial Infarction

Rubina Ajdary,Nazanin Zanjanizadeh Ezazi,Alexandra Correia,Marianna Kemell,Siqi Huan,Heikki J. Ruskoaho,Jouni Hirvonen,Hélder A. Santos,Orlando J. Rojas

DOI: https://doi.org/10.1002/adfm.202003440

IF: 19

2020-07-01

Advanced Functional Materials

Abstract:<p>A biomaterial system incorporating nanocellulose, poly(glycerol sebacate), and polypyrrole is introduced for the treatment of myocardial infarction. Direct ink writing of the multicomponent aqueous suspensions allows multifunctional lattice structures that not only feature elasticity and electrical conductivity but enable cell growth. They are proposed as cardiac patches given their biocompatibility with H9c2 cardiomyoblasts, which attach extensively at the microstructural level, and induce their proliferation for 28 days. Two model drugs (3i‐1000 and curcumin) are investigated for their integration in the patches, either by loading in the precursor suspension used for extrusion or by direct impregnation of the as‐obtained, dry lattice. In studies of drug release conducted for five months, a slow in vitro degradation of the cardiac patches is observed, which prevents drug burst release and indicates their suitability for long‐term therapy. The combination of biocompatibility, biodegradability, mechanical strength, flexibility, and electrical conductivity fulfills the requirement of the highly dynamic and functional electroresponsive cardiac tissue. Overall, the proposed cardiac patches are viable alternatives for the regeneration of myocardium after infarction through the effective integration of cardiac cells with the biomaterial.</p>

materials science, multidisciplinary,chemistry, physical,physics, applied, condensed matter,nanoscience & nanotechnology

A Bi‐Layer Hydrogel Cardiac Patch Made of Recombinant Functional Proteins

Paintable and Rapidly Bondable Conductive Hydrogels As Therapeutic Cardiac Patches

Cardiac-adaptive conductive hydrogel patch enabling construction of mechanical-electrical anisotropic microenvironment for heart repair

Materials and Design Approaches for a Fully Bioresorbable, Electrically Conductive and Mechanically Compliant Cardiac Patch Technology (Adv. Sci. 27/2023)

A Multifunctional Anisotropic Patch Manufactured by Microfluidic Manipulation for the Repair of Infarcted Myocardium

Novel Biomimetic Sandwich-Structured Electrospun Cardiac Patches with Moderate Adhesiveness and Excellent Electrical Conductivity

Materials and Design Approaches for a Fully Bioresorbable, Electrically Conductive and Mechanically Compliant Cardiac Patch Technology

Functional Engineered Human Cardiac Patches Prepared from Nature's Platform Improve Heart Function after Acute Myocardial Infarction.

A Self-Association Cross-Linked conductive zwitterionic hydrogel as a myocardial patch for restoring cardiac function

An Intrapericardial Injectable Hydrogel Patch for Mechanical-Electrical Coupling with Infarcted Myocardium

A Bioprinted Cardiac Patch Composed of Cardiac‐Specific Extracellular Matrix and Progenitor Cells for Heart Repair

Stretchable and Anisotropic Conductive Composite Hydrogel As Therapeutic Cardiac Patches

Electroconductive cardiac patch based on bioactive PEDOT:PSS hydrogels

Dough‐Kneading‐Inspired Design of an Adhesive Cardiac Patch to Attenuate Cardiac Fibrosis and Improve Cardiac Function via Regulating Glycometabolism

Chronological adhesive cardiac patch for synchronous mechanophysiological monitoring and electrocoupling therapy

Flexible Conductive Decellularized Fish Skin Matrix as a Functional Scaffold for Myocardial Infarction Repair

Three-Dimensionally Printed Hydrogel Cardiac Patch for Infarct Regeneration Based on Natural Polysaccharides

A Conductive and Adhesive Hydrogel Composed of MXene Nanoflakes as a Paintable Cardiac Patch for Infarcted Heart Repair.

An Off-the-shelf Artificial Cardiac Patch Improves Cardiac Repair after Myocardial Infarction in Rats and Pigs

4D physiologically adaptable cardiac patch: A 4-month in vivo study for the treatment of myocardial infarction

Multifunctional 3D‐Printed Patches for Long‐Term Drug Release Therapies after Myocardial Infarction