Abstract:Advanced model-based control strategies like Model Predictive Control can offer superior control of key process variables for multiple-input multiple-output systems. The quality of the system model is critical to controller performance and should adequately describe the process dynamics across its operating range while remaining amenable to fast optimization. Mechanistic models might be difficult to construct or might evaluate too slowly for fast-sampling purposes, while System Identification methods that yield linear models might only offer effective control within a limited range. This work thus articulates an integrated System Identification procedure for deriving black-box nonlinear continuous-time multiple-input multiple-output system models for Nonlinear Model Predictive Control. In this piece, seven candidate models were trained on data sets generated from two different methods and integrated into a Nonlinear Model Predictive Controller for a highly nonlinear Continuous Stirred Tank Reactor system. This procedure successfully identified system models that enabled effective control in both servo and regulator problems across wider operating ranges, given that the data set is sufficiently uniform across the operating range. These results were subsequently built upon in a follow-up work. This demonstration of how such system models could be identified for Nonlinear Model Predictive Control without prior knowledge of system dynamics opens further possibilities for direct data-driven methodologies for model-based control which, in the face of process uncertainties or modeling limitations, allow rapid and stable control over wider operating ranges.

Modeling and Validation of a Four‐Tank System for Level Control Process Using Black Box and White Box Model Approaches

Subspace Model Identification for Industrial Processes

Co-Simulation Adams-Simulink for Analysis of Passive Four-Point Leveling System of the Hydraulic Press

Modeling and Model Identification of Micro-position-control Hydraulic System

Subspace based direct closed-loop identification via output over-sampling scheme

Progress in MPC Identification: A Case Study on Totally Closed-Loop Plant Test

System identification: New developments of the asymptotic theory/method

System Identification for Process Control: Recent Experience and Outlook.

A New Subspace Identification Approach Based on Principal Component Analysis and Noise Estimation

Tank Volume Control with Pump Failure: a Case Study in the Mixed Logic Dynamic System

Mimo Process Identification for Controller-Design - Test Signals, Nominal Model and Error-Bounds

System identification and modeling for interacting and non-interacting tank systems using intelligent techniques

Modeling and controller design for heating and ventilation control system using system identification approach

A New Iterative Identification and Control Method of Closed-Loop Power System Based on Ambient Signals

Model plant mismatch detection algorithm based on subspace approach

Generalized System Identification for Nonlinear MPC of Highly Nonlinear MIMO Systems

Model-based control algorithms for the quadruple tank system: An experimental comparison

Grey-Box Modeling and Decoupling Control of a Lab Setup of the Quadruple-Tank System

An integrated approach for machine-learning-based system identification of dynamical systems under control: application towards the model predictive control of a highly nonlinear reactor system

Overview on Subspace Model Identification Methods

An identification algorithm of switched Box-Jenkins systems in the presence of bounded disturbances: An approach for approximating complex biological wastewater treatment models