Abstract:On rough terrain, excessive wheel slippage is easily generated by changes of surface conditions such as soil types and geometries. It induces considerable loss of wheel traction and battery energy. To prevent this, wheeled robots should consistently recognize the current situation generated between wheel and surface. And also wheeled robots are required to optimally control wheel motion in limited wheel traction and battery capacity. Therefore, this paper proposes a novel wheel control algorithm based on slip optimization of traction and energy, which is adaptive to change of surface condition. Proposed wheel control algorithm is called Traction-Energy Balancing Adaptive Control (TEB) in this paper and TEB assigns optimized rotation speed to each wheel by observing wheel slip ratio which is a key parameter of TEB. As functions of TEB, TEB is largely divided into three main parts; (1) slip optimizer (2) slip controller (3) SC-compensator. In the slip optimizer, two optimal slip models were derived as a function of slip ratios regarding maximum traction and tractive efficiency using experimental data about wheel-terrain interaction in three types of soil (grass, gravel and sand). And the optimal slip models were employed in order to determine a desired slip value of wheel with observation of a change in actual robot velocity as control input in the slip controller. For optimal slip control, the proposed slip controller is based on conventional PID controller with compensating disturbance in the controller (SC-compensator) which occurs by change of surface shapes. In the SC-compensator, radial function networks (RBFN) was applied in the slip controller and RBFN was of help to readjust previously set PID gains depending on occurred slip error. Finally, TEB was experimentally verified by controlling a real robot having four wheels on various terrain types.

Wheel Slip Detection for Electric Drive in Planetary Exploration Vehicles

Slip ratio estimation of electric wheels based on tire force and road conditions

Tire-road friction estimation and traction control strategy for motorized electric vehicle

Proprioceptive Slip Detection for Planetary Rovers in Perceptually Degraded Extraterrestrial Environments

Wheel’s Slip Ratio and Sinkage Estimation for Planetary Rovers Moving on Deformable Terrain

Wheel Slip Control Using Sliding-Mode Technique and Maximum Transmissible Torque Estimation

Adaptive robust control with slipping parameters estimation based on intelligent learning for wheeled mobile robot

Integrated Combined-Slip based Vehicle and Wheel Dynamic Control for Electric Vehicles

Traction-energy balancing adaptive control with slip optimization for wheeled robots on rough terrain

Slip Detection and Compensation System for Mobile Robot in Heterogeneous Environment

Practical active traction control for independent‐wheel‐drive electric vehicle based on slip‐ratio threshold determination

Driving force coordinated control of an 8×8 in-wheel motor drive vehicle with tire-road friction coefficient identification

Longitudinal velocity and road slope estimation in hybrid electric vehicles employing early detection of excessive wheel slip

Non-Linear Observer For Slip Parameter Estimation Of Unmanned Wheeled Robots

Piecewise Integral-Proportional Wheel Slip Control for an In-Wheel Motor Driven Vehicle

Research on Some Control Algorithms to Compensate for the Negative Effects of Model Uncertainty Parameters, External Interference, and Wheeled Slip for Mobile Robot

Wheel Slip Control Applied to an Electric Tractor for Improving Tractive Efficiency and Reducing Energy Consumption

Slip slope change detection based on active drive force excitation

An Improved Adaptive Sliding Mode Control Approach for Anti-Slip Regulation of Electric Vehicles Based on Optimal Slip Ratio

Direct Yaw-Moment Control of Electric Vehicle With in-Wheel Motor Drive System

Design of slip-based traction control system for EV and validation using co-simulation between Adams and Matlab/Simulink