Abstract:Post‐treatment of RO membranes (laboratory and commercial scale) with aqueous solutions of N,N‐Dimethylformamide and glycerol enhances permeate flux while achieving controlled salt rejection, opening doors for broader applications in energy‐efficient desalination. Reverse osmosis (RO) effectively provides clean drinking water. Different RO membrane types are tailored to treat saline water feeds with varying characteristics. In the context of low brackish water feeds, the objective is to remove only a minimal excess of salinity through the membrane. Our study introduces a method of membrane post‐treatments capable of achieving controlled salt rejection while concurrently enhancing permeate flux, which is vital for achieving effective and energy‐efficient desalination of low brackish water. The post‐treatments were conducted on our in‐house‐developed membranes using aqueous solutions of N,N‐Dimethylformamide and glycerol for different drying times at the coupon level. The process was scaled up at the module level, allowing us to assess its potential for commercial application. At the coupon level, the permeate flux increased significantly from 3.7 ± 0.9 to 10.6 ± 0.2 L/m2·h·bar, while the salt rejection decreased from 95.6 ± 1% to 70.5 ± 1% when measured with a feed of 2,000 ppm NaCl concentration. At the module level, we observed a higher flux of 12.8 L/m2·h·bar, alongside a salt rejection of 55.5% with a similar feed. Varying post‐treatment parameters at the coupon level allowed us to attain the desired salt rejection and permeate flux values. Physical changes in both pristine and post‐treated membranes, including polymer swelling, were observed without chemical alterations, enhancing our understanding of the post‐treatment effect and its potential for broader commercial use. Practitioner Points Post‐treatment of RO membranes enhances flux. Physical structuring through polymer swelling was observed with the chemical structure unaltered. Post‐treatment of RO opens doors for broader energy‐efficient desalination application.

Highly selective and antifouling reverse osmosis membrane by crosslinkers induced surface modification

Effect of mixed crosslinking agents on performance of thin-film-composite membranes

In-situ Complexation of Silver Nanoparticle on Thin Film Composite Reverse Osmosis Membrane for Improving Desalination and Anti-Biofouling Performance

Antifouling and Antibacterial Bioactive Metabolites of Marine Fungus (terrein)/polyamide Thin-Film Composite Reverse Osmosis Membranes for Desalination Applications

Surface modification on thin-film composite reverse osmosis membrane by cation complexation for antifouling

Efficient Surface Ionization and Metallization of TFC Membranes with Superior Separation Performance, Antifouling and Anti-Bacterial Properties

Preparation of Reverse Osmosis Composite Membrane with High Flux by Interfacial Polymerization of Mpd and Tmc

A Dopamine/Tannic-Acid-Based Co-Deposition Combined with Phytic Acid Modification to Enhance the Anti-Fouling Property of RO Membrane

A rigid-flexible interpenetrating polyamide reverse osmosis membrane with improved antifouling property fabricated via two step modifications

Surface Functionalization of Reverse Osmosis Membranes with Sulfonic Groups for Simultaneous Mitigation of Silica Scaling and Organic Fouling

Preparation of reverse osmosis membrane with high permselectivity and anti-biofouling properties for desalination

In-situ surface modification of a reverse osmosis membrane with acrylic polymers: transport and retention of a small neutral organic micropollutant

Graphene Oxide Surface Modification of Reverse Osmosis (RO) Membrane via Langmuir-Blodgett Technique: Balancing Performance and Antifouling Properties

Surface engineering for anti-wetting and antibacterial membrane for enhanced and fouling resistant membrane distillation performance

Dual modification of reverse osmosis membranes with NH2-MIL-125 and functionalised multiwalled carbon nanotubes for enhanced nanoplastic removal

Hydrophilic Surface Modification of TFC Reverse Osmosis Membrane Using Blends of Sodium Carboxymethyl Cellulose and Chitosan

Multi‐dimensional parametric study for enhancing Brackish Water Reverse Osmosis membrane performance suited for desalination of low salinity feeds

Effects of hydrophilic solvent and oxidation resistance post surface treatment on molecular structure and forward osmosis performance of polyamide thin-film composite (TFC) membranes

Preparation of high performance polyamide membrane by surface modification method for desalination

Enhancing the Permeability and Anti-Fouling Properties of a Polyamide Thin-Film Composite Reverse Osmosis Membrane Via Surface Grafting of L-Lysine

Fouling Deposition As an Effective Approach for Preparing Monovalent Selective Membranes