Abstract:The metastable dual phase FeMnCoCr high entropy alloy (HEA) has attracted great attention since it was first proposed, as it can overcome the strength-ductility trade-off at room temperature. For materials in engineering applications, it is also important to achieve high corrosion resistance while maintaining good mechanical properties. In this study, we simultaneously improved the mechanical properties and corrosion resistance of a FeMnCoCr-based HEA via Cu alloying and by applying a simple processing route that combined cold rolling and partial recrystallization annealing. The alloy doped with 0.3 at.% Cu and processed by annealing at 650 °C for 3 min exhibited the best combination of strength and ductility, i.e., yield strength of 768 MPa, tensile strength of 960 MPa and uniform elongation of 33.6%. The high yield strength majorly originated from high density dislocations and grain boundaries in the material, while the formation of deformation twins, martensite laths, stacking faults and Lomer Cottrell locks contributed to the continuous strain hardening and good ductility. The addition of Cu also enhanced corrosion resistance of the HEA in a NaCl solution by improving stability of the alloy matrix and elevating compactness of the passive film. The solid solution of Cu elevated equilibrium potential of the matrix and promotes transformation of microstructure from the face-centered cubic (fcc) plus hexagonal close-packed (hcp) dual phases to the fcc single phase, effectively inhibiting the accelerated corrosion of micro galvanic couple between different phases and enhancing stability of the matrix. At the same time, the enrichment of CuO in the inner layer of the passive film reduced the defect density within the Fe-rich oxide layer, improving the protection of the passive film against the matrix.

Improved Tribocorrosion Resistance by Addition of Sn to CrFeCoNi High Entropy Alloy

Effect of Sn addition on the tribological behaviors of CoCrFeNi high entropy alloys

Mechanical properties of CoCrFeNi-X (X = Ti,Sn) high entropy alloy and tribological properties in simulated seawater environment

Influence of Cr on Microstructure and Electrochemical Properties of FeNiMnCuCrx High-entropy Alloy

Phase, Microstructure and Corrosion Behaviour of Al0.3FeCoNiCrx High-Entropy Alloys via Cr Addition

Al0.3CrxFeCoNi high-entropy alloys with high corrosion resistance and good mechanical properties

A non-equiatomic FeNiCoCr high-entropy alloy with excellent anti-corrosion performance and strength-ductility synergy

Minor Tungsten Addition Enhances Corrosive Resistance in CoCrFeNi High-Entropy Alloy at Elevated Seawater Temperature

Influence of Al addition on microstructure and electrochemical behaviour of CrMnFeCoNi high-entropy alloy

Effects of Nickel on the Microstructure, Mechanical properties and Corrosion Resistance of CoCrFeNixAl0.15Ti0.1 High Entropy Alloy

The Effect of Copper on the Microstructure, Wear and Corrosion Resistance of CoCrCuFeNi High-Entropy Alloys Manufactured by Powder Metallurgy

Mechanical and tribological characteristics of nickel-rich CoCrCuxFeNi2 high entropy-alloys

Addition Al and/or Ti Induced Modifications of Microstructures, Mechanical Properties, and Corrosion Properties in CoCrFeNi High-Entropy Alloy Coatings

Effect of Co Content on the Microstructure and Corrosion Behavior of Al0.3CoxCrFeNi High Entropy Alloys

Effects of Co/Ni ratio on microstructure and mechanical properties of as-cast Cr-Fe-Ni-Co-Al-Si-Ti-Cu high entropy alloys

Corrosion Resistance and Passivation Behavior of CoCrFeNi-TiAl High-Entropy Alloy Coatings in Acidic Solutions

Cu alloying enables superior strength-ductility combination and high corrosion resistance of FeMnCoCr high entropy alloy

Effect of potential difference in CoXCrNiMoCB high-entropy alloy coatings on corrosion resistance improvement

Comparative Study of Mechanical and Corrosion Behaviors of Cost-Effective AlCrFeNi High Entropy Alloys

Enhancing wear resistance: In-situ ceramic phase precipitation for strengthening and toughening FeCoNiCrNx high-entropy alloy films

Unveiling the underlying corrosion/corrosion-resistance mechanism of a novel corrosion-resistant high entropy alloy by experimental means and AIMD simulations