Abstract:Based on the background of the limited availability of raw materials in the forestry and timber industry, increased attention applies to sawmill by-products and their potential for future applications. Within the present research, the suitability of a natural binder based on different casein sources, superficially lean curd with different lime ratios, for the production of bark insulation panels from larch bark (Larix decidua) in fraction 12.5–4.0 mm with densities below 500 kg/m3 were discussed and physical and mechanical properties evaluated. In order to obtain a benchmark, control boards bound with powdery casein and urea-formaldehyde resin were fabricated. The evaluation of physical-mechanical characteristics indicated the lean curd panels to be competitive with the references and commercially available insulation materials, whereby higher values could be achieved consistently with a lower lime content of 20% compared to 31%. The best moisture resistance and water absorption were observed with a lime ratio of 31%, whilst thickness swelling and mechanical characteristics were best with a lime content of 20%. Particularly with regard to mechanical properties, panels containing a low proportion of lime in the lean curd blends delivered convincing results, e.g., with an average IB of 0.19 N/mm2, MOR of 1.43 N/mm2 and C of 1.70 N/mm2. In terms of thickness swelling, lean curd adhesives generated unsurpassed values of approximately 11% compared to the casein and urea-formaldehyde references. Additionally, as described in the relevant literature, a considerable influence of density on the mechanical behavior of composite materials was observed. Partly, the lime content significantly influenced the panel properties. The study proved that natural binders based on lean curd and lime are suitable for the production of bark insulation boards and represent a serious alternative to synthetic, oil-based adhesive systems. The results are promising with regard to the market situation due to the availability and pricing of raw materials and technical requirements and demonstrated great potential for further research efforts.

Characteristics of beech bark and its effect on properties of UF adhesive and on bonding strength and formaldehyde emission of plywood panels

Functionality of Beech Bark in Adhesive Mixtures Used in Plywood and Its Effect on the Stability Associated with Material Systems

The Application of Oak Bark Powder as a Filler for Melamine-Urea-Formaldehyde Adhesive in Plywood Manufacturing

Modified Buckwheat Husk as a Filler for Urea–Formaldehyde Resin in Plywood Production

Partial replacement of urea-formaldehyde adhesive with fungal biomass and soy flour in plywood fabrication

Properties of Plywood Produced with Urea-Formaldehyde Adhesive Modified with Nanocellulose and Microcellulose

The Removal of Formaldehyde from Urea Formaldehyde Adhesive by Sodium Borohydride Treatment and Its Application in Plywood

Easy Preparation, High Water Resistance Glucose-Based Environment-Friendly Wood Adhesives

Post-extraction birch bark residues as a potential binder in particleboards

The effect of urea-formaldehyde adhesive modification with propylamine on the properties of manufactured plywood

Eco-friendly fiberboards with low formaldehyde content and enhanced mechanical properties produced with activated soybean protein isolate modified urea-formaldehyde resin

Preparation of Environmentally Friendly Urea-Hexanediamine-Glyoxal (HUG) Resin Wood Adhesive

Semi-liquefied bamboo modified urea-formaldehyde resin to synthesize composite adhesives

Eco-Friendly, High-Density Fiberboards Bonded with Urea-Formaldehyde and Ammonium Lignosulfonate

Influence of the use of chestnut starch as a binder filler in plywood technology

Eco-Friendly Adhesives Based on the Oligomeric Condensed Tannins-Rich Extract from Alder Bark for Particleboard and Plywood Production

Adhesion performance of furfurylated plywood bonded with polyurethane and epoxy adhesives

The Influence of Various Modifications of Hazelnut Shell Flour as Potential Filler in Plywood Technology

Bonding properties of polyurethan enhanced by branched polyamine and wood interfacial activation

Physical-Mechanical Properties of Light Bark Boards Bound with Casein Adhesives

Lignosulfonate and glycidyl ether modified urea formaldehyde wood adhesives for interior particleboard production